patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH] net/ixgbe: fix link status inconsistencies
@ 2020-02-26 12:06 taox.zhu
  2020-03-03  2:00 ` Zhu, TaoX
  2020-03-29  4:14 ` [dpdk-stable] [dpdk-dev] " Ye Xiaolong
  0 siblings, 2 replies; 4+ messages in thread
From: taox.zhu @ 2020-02-26 12:06 UTC (permalink / raw)
  To: konstantin.ananyev, wenzhuo.lu; +Cc: dev, Zhu Tao, stable

From: Zhu Tao <taox.zhu@intel.com>

Setting LINK UP or LINK DOWN is divided into two parts, with
the main task done in a separate thread, which can take up
to 9 seconds. If cancel the thread in execution, may cause state
inconsistencies. Therefore, must wait for the previous setting
to exit normally before setting the new state.

Note: before using threads, use alarm to handle main tasks.
When canceling alarm, the execution of alarm will not be interrupted.

Fixes: 819d0d1d57 ("net/ixgbe: fix blocking system events")
Cc: stable@dpdk.org

Signed-off-by: Zhu Tao <taox.zhu@intel.com>
---
 drivers/net/ixgbe/ixgbe_ethdev.c | 24 ++++++++++++++++++++++--
 1 file changed, 22 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_ethdev.c b/drivers/net/ixgbe/ixgbe_ethdev.c
index 23b3f5b0c..2c5797635 100644
--- a/drivers/net/ixgbe/ixgbe_ethdev.c
+++ b/drivers/net/ixgbe/ixgbe_ethdev.c
@@ -4143,16 +4143,35 @@ ixgbevf_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
 	return ret_val;
 }
 
+/* return 1: setup complete, return 0: setup not complete, and wait timeout*/
+static int
+ixgbe_dev_wait_setup_link_complete(struct rte_eth_dev *dev)
+{
+#define DELAY_INTERVAL 100 /* 100ms */
+#define MAX_TIMEOUT    90 /* 9s (90 * 100ms) in total */
+	struct ixgbe_adapter *ad = dev->data->dev_private;
+	int timeout = MAX_TIMEOUT;
+
+	while (rte_atomic32_read(&ad->link_thread_running) && timeout) {
+		msec_delay(DELAY_INTERVAL);
+		timeout--;
+	}
+
+
+	return !!timeout;
+}
+
 static void
 ixgbe_dev_cancel_link_thread(struct rte_eth_dev *dev)
 {
 	struct ixgbe_adapter *ad = dev->data->dev_private;
 	void *retval;
 
-	if (rte_atomic32_read(&ad->link_thread_running)) {
+	if (!ixgbe_dev_wait_setup_link_complete(dev)) {
 		pthread_cancel(ad->link_thread_tid);
 		pthread_join(ad->link_thread_tid, &retval);
 		rte_atomic32_clear(&ad->link_thread_running);
+		PMD_DRV_LOG(ERR, "Link thread not complete, cancel it!");
 	}
 }
 
@@ -4263,7 +4282,8 @@ ixgbe_dev_link_update_share(struct rte_eth_dev *dev,
 	if (link_up == 0) {
 		if (ixgbe_get_media_type(hw) == ixgbe_media_type_fiber) {
 			intr->flags |= IXGBE_FLAG_NEED_LINK_CONFIG;
-			if (rte_atomic32_test_and_set(&ad->link_thread_running)) {
+			if (ixgbe_dev_wait_setup_link_complete(dev) &&
+			    rte_atomic32_test_and_set(&ad->link_thread_running)) {
 				if (rte_ctrl_thread_create(&ad->link_thread_tid,
 					"ixgbe-link-handler",
 					NULL,
-- 
2.17.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2020-03-29  4:17 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-02-26 12:06 [dpdk-stable] [PATCH] net/ixgbe: fix link status inconsistencies taox.zhu
2020-03-03  2:00 ` Zhu, TaoX
2020-03-19  2:43   ` Zhu, TaoX
2020-03-29  4:14 ` [dpdk-stable] [dpdk-dev] " Ye Xiaolong

patches for DPDK stable branches

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git