patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Qi Zhang <qi.z.zhang@intel.com>
To: beilei.xing@intel.com, xiaolong.ye@intel.com
Cc: dev@dpdk.org, Qi Zhang <qi.z.zhang@intel.com>, stable@dpdk.org
Subject: [dpdk-stable] [PATCH] net/ice: remove bulk alloc compile option
Date: Wed,  4 Mar 2020 19:40:38 +0800	[thread overview]
Message-ID: <20200304114038.39644-1-qi.z.zhang@intel.com> (raw)

Remove CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC with below
consideration:

1. a default Rx path can always be selected by setting a proper
   rx_free_thresh value at runtime, see
   ice_check_rx_burst_bulk_alloc_preconditions.

2. its not a big deal to always reserve more space for desc ring.
   "ring_size = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);"

3. Fixes a potential invalid memory access in ice_reset_rx_queue.
   if CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC is turned on while
   ice_check_rx_burst_bulk_alloc_preconditions return fail.
   below code will have problem.

   for (i = 0; i < ICE_RX_MAX_BURST; ++i)
   	rxq->sw_ring[rxq->nb_rx_desc + i].mbuf = &rxq->fake_mbuf;

Fixes: 50370662b727 ("net/ice: support device and queue ops")
Cc: stable@dpdk.org

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
 config/common_base         |  1 -
 doc/guides/nics/ice.rst    |  4 ---
 drivers/net/ice/ice_rxtx.c | 64 ++++++++++------------------------------------
 3 files changed, 13 insertions(+), 56 deletions(-)

diff --git a/config/common_base b/config/common_base
index 7ca2f28b1..c31175f9d 100644
--- a/config/common_base
+++ b/config/common_base
@@ -337,7 +337,6 @@ CONFIG_RTE_LIBRTE_ICE_PMD=y
 CONFIG_RTE_LIBRTE_ICE_DEBUG_RX=n
 CONFIG_RTE_LIBRTE_ICE_DEBUG_TX=n
 CONFIG_RTE_LIBRTE_ICE_DEBUG_TX_FREE=n
-CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC=y
 CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC=n
 
 # Compile burst-oriented IAVF PMD driver
diff --git a/doc/guides/nics/ice.rst b/doc/guides/nics/ice.rst
index cde3fd620..8af32dabf 100644
--- a/doc/guides/nics/ice.rst
+++ b/doc/guides/nics/ice.rst
@@ -54,10 +54,6 @@ Please note that enabling debugging options may affect system performance.
 
   Toggle display of generic debugging messages.
 
-- ``CONFIG_RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC`` (default ``y``)
-
-  Toggle bulk allocation for RX.
-
 - ``CONFIG_RTE_LIBRTE_ICE_16BYTE_RX_DESC`` (default ``n``)
 
   Toggle to use a 16-byte RX descriptor, by default the RX descriptor is 32 byte.
diff --git a/drivers/net/ice/ice_rxtx.c b/drivers/net/ice/ice_rxtx.c
index 60c411bfa..c7e5fc484 100644
--- a/drivers/net/ice/ice_rxtx.c
+++ b/drivers/net/ice/ice_rxtx.c
@@ -236,17 +236,15 @@ _ice_rx_queue_release_mbufs(struct ice_rx_queue *rxq)
 			rxq->sw_ring[i].mbuf = NULL;
 		}
 	}
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
-		if (rxq->rx_nb_avail == 0)
-			return;
-		for (i = 0; i < rxq->rx_nb_avail; i++) {
-			struct rte_mbuf *mbuf;
-
-			mbuf = rxq->rx_stage[rxq->rx_next_avail + i];
-			rte_pktmbuf_free_seg(mbuf);
-		}
-		rxq->rx_nb_avail = 0;
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
+	if (rxq->rx_nb_avail == 0)
+		return;
+	for (i = 0; i < rxq->rx_nb_avail; i++) {
+		struct rte_mbuf *mbuf;
+
+		mbuf = rxq->rx_stage[rxq->rx_next_avail + i];
+		rte_pktmbuf_free_seg(mbuf);
+	}
+	rxq->rx_nb_avail = 0;
 }
 
 static void
@@ -309,16 +307,10 @@ ice_switch_rx_queue(struct ice_hw *hw, uint16_t q_idx, bool on)
 }
 
 static inline int
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
 ice_check_rx_burst_bulk_alloc_preconditions(struct ice_rx_queue *rxq)
-#else
-ice_check_rx_burst_bulk_alloc_preconditions
-	(__rte_unused struct ice_rx_queue *rxq)
-#endif
 {
 	int ret = 0;
 
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
 	if (!(rxq->rx_free_thresh >= ICE_RX_MAX_BURST)) {
 		PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions: "
 			     "rxq->rx_free_thresh=%d, "
@@ -338,9 +330,6 @@ ice_check_rx_burst_bulk_alloc_preconditions
 			     rxq->nb_rx_desc, rxq->rx_free_thresh);
 		ret = -EINVAL;
 	}
-#else
-	ret = -EINVAL;
-#endif
 
 	return ret;
 }
@@ -357,17 +346,11 @@ ice_reset_rx_queue(struct ice_rx_queue *rxq)
 		return;
 	}
 
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
-	if (ice_check_rx_burst_bulk_alloc_preconditions(rxq) == 0)
-		len = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);
-	else
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
-		len = rxq->nb_rx_desc;
+	len = (uint16_t)(rxq->nb_rx_desc + ICE_RX_MAX_BURST);
 
 	for (i = 0; i < len * sizeof(union ice_rx_flex_desc); i++)
 		((volatile char *)rxq->rx_ring)[i] = 0;
 
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
 	memset(&rxq->fake_mbuf, 0x0, sizeof(rxq->fake_mbuf));
 	for (i = 0; i < ICE_RX_MAX_BURST; ++i)
 		rxq->sw_ring[rxq->nb_rx_desc + i].mbuf = &rxq->fake_mbuf;
@@ -375,7 +358,6 @@ ice_reset_rx_queue(struct ice_rx_queue *rxq)
 	rxq->rx_nb_avail = 0;
 	rxq->rx_next_avail = 0;
 	rxq->rx_free_trigger = (uint16_t)(rxq->rx_free_thresh - 1);
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
 
 	rxq->rx_tail = 0;
 	rxq->nb_rx_hold = 0;
@@ -926,13 +908,11 @@ ice_rx_queue_setup(struct rte_eth_dev *dev,
 	/* Allocate the maximun number of RX ring hardware descriptor. */
 	len = ICE_MAX_RING_DESC;
 
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
 	/**
 	 * Allocating a little more memory because vectorized/bulk_alloc Rx
 	 * functions doesn't check boundaries each time.
 	 */
 	len += ICE_RX_MAX_BURST;
-#endif
 
 	/* Allocate the maximum number of RX ring hardware descriptor. */
 	ring_size = sizeof(union ice_rx_flex_desc) * len;
@@ -952,11 +932,8 @@ ice_rx_queue_setup(struct rte_eth_dev *dev,
 	rxq->rx_ring_dma = rz->iova;
 	rxq->rx_ring = rz->addr;
 
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
+	/* always reserve more for bulk alloc */
 	len = (uint16_t)(nb_desc + ICE_RX_MAX_BURST);
-#else
-	len = nb_desc;
-#endif
 
 	/* Allocate the software ring. */
 	rxq->sw_ring = rte_zmalloc_socket(NULL,
@@ -977,17 +954,14 @@ ice_rx_queue_setup(struct rte_eth_dev *dev,
 	use_def_burst_func = ice_check_rx_burst_bulk_alloc_preconditions(rxq);
 
 	if (!use_def_burst_func) {
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
 		PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions are "
 			     "satisfied. Rx Burst Bulk Alloc function will be "
 			     "used on port=%d, queue=%d.",
 			     rxq->port_id, rxq->queue_id);
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
 	} else {
 		PMD_INIT_LOG(DEBUG, "Rx Burst Bulk Alloc Preconditions are "
-			     "not satisfied, Scattered Rx is requested, "
-			     "or RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC is "
-			     "not enabled on port=%d, queue=%d.",
+			     "not satisfied, Scattered Rx is requested. "
+			     "on port=%d, queue=%d.",
 			     rxq->port_id, rxq->queue_id);
 		ad->rx_bulk_alloc_allowed = false;
 	}
@@ -1399,7 +1373,6 @@ ice_rxd_to_pkt_fields(struct rte_mbuf *mb,
 #endif
 }
 
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
 #define ICE_LOOK_AHEAD 8
 #if (ICE_LOOK_AHEAD != 8)
 #error "PMD ICE: ICE_LOOK_AHEAD must be 8\n"
@@ -1620,15 +1593,6 @@ ice_recv_pkts_bulk_alloc(void *rx_queue,
 
 	return nb_rx;
 }
-#else
-static uint16_t
-ice_recv_pkts_bulk_alloc(void __rte_unused *rx_queue,
-			 struct rte_mbuf __rte_unused **rx_pkts,
-			 uint16_t __rte_unused nb_pkts)
-{
-	return 0;
-}
-#endif /* RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC */
 
 static uint16_t
 ice_recv_scattered_pkts(void *rx_queue,
@@ -1872,9 +1836,7 @@ ice_dev_supported_ptypes_get(struct rte_eth_dev *dev)
 		ptypes = ptypes_os;
 
 	if (dev->rx_pkt_burst == ice_recv_pkts ||
-#ifdef RTE_LIBRTE_ICE_RX_ALLOW_BULK_ALLOC
 	    dev->rx_pkt_burst == ice_recv_pkts_bulk_alloc ||
-#endif
 	    dev->rx_pkt_burst == ice_recv_scattered_pkts)
 		return ptypes;
 
-- 
2.13.6


             reply	other threads:[~2020-03-04 11:37 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-03-04 11:40 Qi Zhang [this message]
2020-03-06  8:46 ` Ye Xiaolong
2020-03-06 23:29   ` Zhang, Qi Z
2020-03-08  4:13   ` [dpdk-stable] [dpdk-dev] " Ye Xiaolong
  -- strict thread matches above, loose matches on Subject: below --
2020-03-04 11:39 [dpdk-stable] " Qi Zhang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200304114038.39644-1-qi.z.zhang@intel.com \
    --to=qi.z.zhang@intel.com \
    --cc=beilei.xing@intel.com \
    --cc=dev@dpdk.org \
    --cc=stable@dpdk.org \
    --cc=xiaolong.ye@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).