[dpdk-stable] patch 'doc: fix rule file parameters in l3fwd-acl guide' has been queued to LTS release 18.11.11

[Kevin Traynor <ktraynor@redhat.com>]

Hi,

FYI, your patch has been queued to LTS release 18.11.11

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 11/27/20. So please
shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://github.com/kevintraynor/dpdk-stable-queue

This queued commit can be viewed at:
https://github.com/kevintraynor/dpdk-stable-queue/commit/591190e371b85365968da3d0e2d991a8babf1a86

Thanks.

Kevin.

---
From 591190e371b85365968da3d0e2d991a8babf1a86 Mon Sep 17 00:00:00 2001
From: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Date: Mon, 2 Nov 2020 11:19:15 +0000
Subject: [PATCH] doc: fix rule file parameters in l3fwd-acl guide

[ upstream commit 1995c2c1b99afe89be8b532d2fde0d3619446f3c ]

Add "--" and remove extra spaces in l3fwd-acl commands.

Fixes: d0dff9ba445e ("doc: sample application user guide")

Signed-off-by: Ibtisam Tariq <ibtisam.tariq@emumba.com>
Reviewed-by: David Marchand <david.marchand@redhat.com>
---
 doc/guides/sample_app_ug/l3_forward_access_ctrl.rst | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
index a44fbcd52c..32adf2d3aa 100644
--- a/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
+++ b/doc/guides/sample_app_ug/l3_forward_access_ctrl.rst
@@ -237,5 +237,5 @@ The application has a number of command line options:
 ..  code-block:: console
 
-    ./build/l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa]
+    ./build/l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME --rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa]
 
 
@@ -269,5 +269,5 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s
 ..  code-block:: console
 
-    ./build/l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --scalar
+    ./build/l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="rule_ipv4.db" -- rule_ipv6="rule_ipv6.db" --scalar
 
 In this command:
@@ -291,7 +291,7 @@ In this command:
     +----------+------------+-----------+-------------------------------------+
 
-*   The --rule_ipv4 option specifies the reading of IPv4 rules sets from the ./ rule_ipv4.db file.
+*   The --rule_ipv4 option specifies the reading of IPv4 rules sets from the rule_ipv4.db file.
 
-*   The --rule_ipv6 option specifies the reading of IPv6 rules sets from the ./ rule_ipv6.db file.
+*   The --rule_ipv6 option specifies the reading of IPv6 rules sets from the rule_ipv6.db file.
 
 *   The --scalar option specifies the performing of rule lookup with a scalar function.
-- 
2.26.2

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2020-11-23 17:10:14.510812766 +0000
+++ 0022-doc-fix-rule-file-parameters-in-l3fwd-acl-guide.patch	2020-11-23 17:10:14.005061599 +0000
@@ -1 +1 @@
-From 1995c2c1b99afe89be8b532d2fde0d3619446f3c Mon Sep 17 00:00:00 2001
+From 591190e371b85365968da3d0e2d991a8babf1a86 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 1995c2c1b99afe89be8b532d2fde0d3619446f3c ]
+
@@ -9 +10,0 @@
-Cc: stable@dpdk.org
@@ -18 +19 @@
-index eee5d81850..2cf6e4556f 100644
+index a44fbcd52c..32adf2d3aa 100644
@@ -24,2 +25,2 @@
--    ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--alg=<val>] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
-+    ./<build_dir>/examples/dpdk-l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME --rule_ipv6 FILENAME [--alg=<val>] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa] [--eth-dest=X,MM:MM:MM:MM:MM:MM]
+-    ./build/l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa]
++    ./build/l3fwd-acl [EAL options] -- -p PORTMASK [-P] --config(port,queue,lcore)[,(port,queue,lcore)] --rule_ipv4 FILENAME --rule_ipv6 FILENAME [--scalar] [--enable-jumbo [--max-pkt-len PKTLEN]] [--no-numa]
@@ -28 +29 @@
-@@ -272,5 +272,5 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s
+@@ -269,5 +269,5 @@ To enable L3 forwarding between two ports, assuming that both ports are in the s
@@ -31,2 +32,2 @@
--    ./<build_dir>/examples/dpdk-l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --alg=scalar
-+    ./<build_dir>/examples/dpdk-l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="rule_ipv4.db" --rule_ipv6="rule_ipv6.db" --alg=scalar
+-    ./build/l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="./rule_ipv4.db" -- rule_ipv6="./rule_ipv6.db" --scalar
++    ./build/l3fwd-acl -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --rule_ipv4="rule_ipv4.db" -- rule_ipv6="rule_ipv6.db" --scalar
@@ -35 +36 @@
-@@ -294,7 +294,7 @@ In this command:
+@@ -291,7 +291,7 @@ In this command:
@@ -44 +45 @@
- *   The --alg=scalar option specifies the performing of rule lookup with a scalar function.
+ *   The --scalar option specifies the performing of rule lookup with a scalar function.