patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH v2] net/ixgbe: fix fdirctrl register setting
       [not found] <20201211013506.49885-1-dapengx.yu@intel.com>
@ 2020-12-15 10:10 ` dapengx.yu
  2020-12-22  6:51   ` [dpdk-stable] [dpdk-dev] " Zhou, JunX W
  0 siblings, 1 reply; 4+ messages in thread
From: dapengx.yu @ 2020-12-15 10:10 UTC (permalink / raw)
  To: jia.guo; +Cc: dev, YU DAPENG, stable

From: YU DAPENG <dapengx.yu@intel.com>

The function ixgbe_fdir_set_flexbytes_offset is used when create FDir
rule for flexbytes. It set a register: FDIRCTRL.FLEX_OFFSET, which
cause that even if the FDir flexbytes rule is destroyed, the rule still
direct the packet and transfer it to the wrong place. It is because
setting FDIRCTRL shall only be permitted on Flow Director
initialization flow or clearing the Flow Director table according to
intel datasheet, otherwise unexpected happens. In order to evade the
limit, add code to set FDIRCMD.CLEARHT to 1b and then clear it back to
0b to make the setting act like the Flow Director initialization flow
or clearing the Flow Director table.

Fixes: f35fec63dde1 ("net/ixgbe: enable flex bytes for generic flow API")
Cc: stable@dpdk.org

Signed-off-by: YU DAPENG <dapengx.yu@intel.com>
---
 drivers/net/ixgbe/ixgbe_fdir.c | 29 +++++++++++++++++++++++++++++
 drivers/net/ixgbe/ixgbe_flow.c | 15 ++++++++-------
 2 files changed, 37 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_fdir.c b/drivers/net/ixgbe/ixgbe_fdir.c
index a0fab5070..11b9effeb 100644
--- a/drivers/net/ixgbe/ixgbe_fdir.c
+++ b/drivers/net/ixgbe/ixgbe_fdir.c
@@ -503,9 +503,30 @@ ixgbe_fdir_set_flexbytes_offset(struct rte_eth_dev *dev,
 				uint16_t offset)
 {
 	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct ixgbe_hw_fdir_info *fdir_info =
+		IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data->dev_private);
 	uint32_t fdirctrl;
 	int i;
 
+	if (fdir_info->flex_bytes_offset == offset)
+		return 0;
+
+	/**
+	 * 82599 adapters flow director init flow cannot be restarted,
+	 * Workaround 82599 silicon errata by performing the following steps
+	 * before re-writing the FDIRCTRL control register with the same value.
+	 * - write 1 to bit 8 of FDIRCMD register &
+	 * - write 0 to bit 8 of FDIRCMD register
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+			 IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+			 ~IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+
 	fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
 
 	fdirctrl &= ~IXGBE_FDIRCTRL_FLEX_MASK;
@@ -520,6 +541,14 @@ ixgbe_fdir_set_flexbytes_offset(struct rte_eth_dev *dev,
 			break;
 		msec_delay(1);
 	}
+
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
+		PMD_DRV_LOG(ERR, "Flow Director poll time exceeded!");
+		return -ETIMEDOUT;
+	}
+
+	fdir_info->flex_bytes_offset = offset;
+
 	return 0;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c
index 39f6ed73f..9aeb2e4a4 100644
--- a/drivers/net/ixgbe/ixgbe_flow.c
+++ b/drivers/net/ixgbe/ixgbe_flow.c
@@ -3137,13 +3137,13 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
 				rte_memcpy(&fdir_info->mask,
 					&fdir_rule.mask,
 					sizeof(struct ixgbe_hw_fdir_mask));
-				fdir_info->flex_bytes_offset =
-					fdir_rule.flex_bytes_offset;
 
-				if (fdir_rule.mask.flex_bytes_mask)
-					ixgbe_fdir_set_flexbytes_offset(dev,
+				if (fdir_rule.mask.flex_bytes_mask) {
+					ret = ixgbe_fdir_set_flexbytes_offset(dev,
 						fdir_rule.flex_bytes_offset);
-
+					if (ret)
+						goto out;
+				}
 				ret = ixgbe_fdir_set_input_mask(dev);
 				if (ret)
 					goto out;
@@ -3161,8 +3161,9 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
 				if (ret)
 					goto out;
 
-				if (fdir_info->flex_bytes_offset !=
-						fdir_rule.flex_bytes_offset)
+				if (fdir_rule.mask.flex_bytes_mask &&
+				    fdir_info->flex_bytes_offset !=
+				    fdir_rule.flex_bytes_offset)
 					goto out;
 			}
 		}
-- 
2.26.2.windows.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/ixgbe: fix fdirctrl register setting
  2020-12-15 10:10 ` [dpdk-stable] [PATCH v2] net/ixgbe: fix fdirctrl register setting dapengx.yu
@ 2020-12-22  6:51   ` Zhou, JunX W
  2020-12-22  7:23     ` Guo, Jia
  0 siblings, 1 reply; 4+ messages in thread
From: Zhou, JunX W @ 2020-12-22  6:51 UTC (permalink / raw)
  To: Yu, DapengX, Guo, Jia; +Cc: dev, Yu, DapengX, stable

Tested-by: Zhou, Jun <junx.w.zhou@intel.com> 

-----Original Message-----
From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of dapengx.yu@intel.com
Sent: Tuesday, December 15, 2020 6:11 PM
To: Guo, Jia <jia.guo@intel.com>
Cc: dev@dpdk.org; Yu, DapengX <dapengx.yu@intel.com>; stable@dpdk.org
Subject: [dpdk-dev] [PATCH v2] net/ixgbe: fix fdirctrl register setting

From: YU DAPENG <dapengx.yu@intel.com>

The function ixgbe_fdir_set_flexbytes_offset is used when create FDir rule for flexbytes. It set a register: FDIRCTRL.FLEX_OFFSET, which cause that even if the FDir flexbytes rule is destroyed, the rule still direct the packet and transfer it to the wrong place. It is because setting FDIRCTRL shall only be permitted on Flow Director initialization flow or clearing the Flow Director table according to intel datasheet, otherwise unexpected happens. In order to evade the limit, add code to set FDIRCMD.CLEARHT to 1b and then clear it back to 0b to make the setting act like the Flow Director initialization flow or clearing the Flow Director table.

Fixes: f35fec63dde1 ("net/ixgbe: enable flex bytes for generic flow API")
Cc: stable@dpdk.org

Signed-off-by: YU DAPENG <dapengx.yu@intel.com>
---
 drivers/net/ixgbe/ixgbe_fdir.c | 29 +++++++++++++++++++++++++++++  drivers/net/ixgbe/ixgbe_flow.c | 15 ++++++++-------
 2 files changed, 37 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ixgbe/ixgbe_fdir.c b/drivers/net/ixgbe/ixgbe_fdir.c index a0fab5070..11b9effeb 100644
--- a/drivers/net/ixgbe/ixgbe_fdir.c
+++ b/drivers/net/ixgbe/ixgbe_fdir.c
@@ -503,9 +503,30 @@ ixgbe_fdir_set_flexbytes_offset(struct rte_eth_dev *dev,
 				uint16_t offset)
 {
 	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct ixgbe_hw_fdir_info *fdir_info =
+		IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data->dev_private);
 	uint32_t fdirctrl;
 	int i;
 
+	if (fdir_info->flex_bytes_offset == offset)
+		return 0;
+
+	/**
+	 * 82599 adapters flow director init flow cannot be restarted,
+	 * Workaround 82599 silicon errata by performing the following steps
+	 * before re-writing the FDIRCTRL control register with the same value.
+	 * - write 1 to bit 8 of FDIRCMD register &
+	 * - write 0 to bit 8 of FDIRCMD register
+	 */
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
+			 IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
+			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
+			 ~IXGBE_FDIRCMD_CLEARHT));
+	IXGBE_WRITE_FLUSH(hw);
+
 	fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
 
 	fdirctrl &= ~IXGBE_FDIRCTRL_FLEX_MASK; @@ -520,6 +541,14 @@ ixgbe_fdir_set_flexbytes_offset(struct rte_eth_dev *dev,
 			break;
 		msec_delay(1);
 	}
+
+	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
+		PMD_DRV_LOG(ERR, "Flow Director poll time exceeded!");
+		return -ETIMEDOUT;
+	}
+
+	fdir_info->flex_bytes_offset = offset;
+
 	return 0;
 }
 
diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c index 39f6ed73f..9aeb2e4a4 100644
--- a/drivers/net/ixgbe/ixgbe_flow.c
+++ b/drivers/net/ixgbe/ixgbe_flow.c
@@ -3137,13 +3137,13 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
 				rte_memcpy(&fdir_info->mask,
 					&fdir_rule.mask,
 					sizeof(struct ixgbe_hw_fdir_mask));
-				fdir_info->flex_bytes_offset =
-					fdir_rule.flex_bytes_offset;
 
-				if (fdir_rule.mask.flex_bytes_mask)
-					ixgbe_fdir_set_flexbytes_offset(dev,
+				if (fdir_rule.mask.flex_bytes_mask) {
+					ret = ixgbe_fdir_set_flexbytes_offset(dev,
 						fdir_rule.flex_bytes_offset);
-
+					if (ret)
+						goto out;
+				}
 				ret = ixgbe_fdir_set_input_mask(dev);
 				if (ret)
 					goto out;
@@ -3161,8 +3161,9 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
 				if (ret)
 					goto out;
 
-				if (fdir_info->flex_bytes_offset !=
-						fdir_rule.flex_bytes_offset)
+				if (fdir_rule.mask.flex_bytes_mask &&
+				    fdir_info->flex_bytes_offset !=
+				    fdir_rule.flex_bytes_offset)
 					goto out;
 			}
 		}
--
2.26.2.windows.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/ixgbe: fix fdirctrl register setting
  2020-12-22  6:51   ` [dpdk-stable] [dpdk-dev] " Zhou, JunX W
@ 2020-12-22  7:23     ` Guo, Jia
  2021-01-05 12:09       ` Ferruh Yigit
  0 siblings, 1 reply; 4+ messages in thread
From: Guo, Jia @ 2020-12-22  7:23 UTC (permalink / raw)
  To: Zhou, JunX W, Yu, DapengX; +Cc: dev, Yu, DapengX, stable

Acked-by: Jeff Guo <jia.guo@intel.com>

> -----Original Message-----
> From: Zhou, JunX W <junx.w.zhou@intel.com>
> Sent: Tuesday, December 22, 2020 2:51 PM
> To: Yu, DapengX <dapengx.yu@intel.com>; Guo, Jia <jia.guo@intel.com>
> Cc: dev@dpdk.org; Yu, DapengX <dapengx.yu@intel.com>; stable@dpdk.org
> Subject: RE: [dpdk-dev] [PATCH v2] net/ixgbe: fix fdirctrl register setting
> 
> Tested-by: Zhou, Jun <junx.w.zhou@intel.com>
> 
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of
> dapengx.yu@intel.com
> Sent: Tuesday, December 15, 2020 6:11 PM
> To: Guo, Jia <jia.guo@intel.com>
> Cc: dev@dpdk.org; Yu, DapengX <dapengx.yu@intel.com>; stable@dpdk.org
> Subject: [dpdk-dev] [PATCH v2] net/ixgbe: fix fdirctrl register setting
> 
> From: YU DAPENG <dapengx.yu@intel.com>
> 
> The function ixgbe_fdir_set_flexbytes_offset is used when create FDir rule
> for flexbytes. It set a register: FDIRCTRL.FLEX_OFFSET, which cause that even
> if the FDir flexbytes rule is destroyed, the rule still direct the packet and
> transfer it to the wrong place. It is because setting FDIRCTRL shall only be
> permitted on Flow Director initialization flow or clearing the Flow Director
> table according to intel datasheet, otherwise unexpected happens. In order
> to evade the limit, add code to set FDIRCMD.CLEARHT to 1b and then clear it
> back to 0b to make the setting act like the Flow Director initialization flow or
> clearing the Flow Director table.
> 
> Fixes: f35fec63dde1 ("net/ixgbe: enable flex bytes for generic flow API")
> Cc: stable@dpdk.org
> 
> Signed-off-by: YU DAPENG <dapengx.yu@intel.com>
> ---
>  drivers/net/ixgbe/ixgbe_fdir.c | 29 +++++++++++++++++++++++++++++
> drivers/net/ixgbe/ixgbe_flow.c | 15 ++++++++-------
>  2 files changed, 37 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/net/ixgbe/ixgbe_fdir.c b/drivers/net/ixgbe/ixgbe_fdir.c
> index a0fab5070..11b9effeb 100644
> --- a/drivers/net/ixgbe/ixgbe_fdir.c
> +++ b/drivers/net/ixgbe/ixgbe_fdir.c
> @@ -503,9 +503,30 @@ ixgbe_fdir_set_flexbytes_offset(struct rte_eth_dev
> *dev,
>  				uint16_t offset)
>  {
>  	struct ixgbe_hw *hw = IXGBE_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> +	struct ixgbe_hw_fdir_info *fdir_info =
> +		IXGBE_DEV_PRIVATE_TO_FDIR_INFO(dev->data-
> >dev_private);
>  	uint32_t fdirctrl;
>  	int i;
> 
> +	if (fdir_info->flex_bytes_offset == offset)
> +		return 0;
> +
> +	/**
> +	 * 82599 adapters flow director init flow cannot be restarted,
> +	 * Workaround 82599 silicon errata by performing the following steps
> +	 * before re-writing the FDIRCTRL control register with the same
> value.
> +	 * - write 1 to bit 8 of FDIRCMD register &
> +	 * - write 0 to bit 8 of FDIRCMD register
> +	 */
> +	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
> +			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
> +			 IXGBE_FDIRCMD_CLEARHT));
> +	IXGBE_WRITE_FLUSH(hw);
> +	IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
> +			(IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
> +			 ~IXGBE_FDIRCMD_CLEARHT));
> +	IXGBE_WRITE_FLUSH(hw);
> +
>  	fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
> 
>  	fdirctrl &= ~IXGBE_FDIRCTRL_FLEX_MASK; @@ -520,6 +541,14 @@
> ixgbe_fdir_set_flexbytes_offset(struct rte_eth_dev *dev,
>  			break;
>  		msec_delay(1);
>  	}
> +
> +	if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
> +		PMD_DRV_LOG(ERR, "Flow Director poll time exceeded!");
> +		return -ETIMEDOUT;
> +	}
> +
> +	fdir_info->flex_bytes_offset = offset;
> +
>  	return 0;
>  }
> 
> diff --git a/drivers/net/ixgbe/ixgbe_flow.c b/drivers/net/ixgbe/ixgbe_flow.c
> index 39f6ed73f..9aeb2e4a4 100644
> --- a/drivers/net/ixgbe/ixgbe_flow.c
> +++ b/drivers/net/ixgbe/ixgbe_flow.c
> @@ -3137,13 +3137,13 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
>  				rte_memcpy(&fdir_info->mask,
>  					&fdir_rule.mask,
>  					sizeof(struct ixgbe_hw_fdir_mask));
> -				fdir_info->flex_bytes_offset =
> -					fdir_rule.flex_bytes_offset;
> 
> -				if (fdir_rule.mask.flex_bytes_mask)
> -					ixgbe_fdir_set_flexbytes_offset(dev,
> +				if (fdir_rule.mask.flex_bytes_mask) {
> +					ret =
> ixgbe_fdir_set_flexbytes_offset(dev,
>  						fdir_rule.flex_bytes_offset);
> -
> +					if (ret)
> +						goto out;
> +				}
>  				ret = ixgbe_fdir_set_input_mask(dev);
>  				if (ret)
>  					goto out;
> @@ -3161,8 +3161,9 @@ ixgbe_flow_create(struct rte_eth_dev *dev,
>  				if (ret)
>  					goto out;
> 
> -				if (fdir_info->flex_bytes_offset !=
> -						fdir_rule.flex_bytes_offset)
> +				if (fdir_rule.mask.flex_bytes_mask &&
> +				    fdir_info->flex_bytes_offset !=
> +				    fdir_rule.flex_bytes_offset)
>  					goto out;
>  			}
>  		}
> --
> 2.26.2.windows.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [dpdk-stable] [dpdk-dev] [PATCH v2] net/ixgbe: fix fdirctrl register setting
  2020-12-22  7:23     ` Guo, Jia
@ 2021-01-05 12:09       ` Ferruh Yigit
  0 siblings, 0 replies; 4+ messages in thread
From: Ferruh Yigit @ 2021-01-05 12:09 UTC (permalink / raw)
  To: Guo, Jia, Zhou, JunX W, Yu, DapengX; +Cc: dev, stable, Zhang, Qi Z

On 12/22/2020 7:23 AM, Guo, Jia wrote:
> Acked-by: Jeff Guo <jia.guo@intel.com>
> 
>> -----Original Message-----
>> From: Zhou, JunX W <junx.w.zhou@intel.com>
>> Sent: Tuesday, December 22, 2020 2:51 PM
>> To: Yu, DapengX <dapengx.yu@intel.com>; Guo, Jia <jia.guo@intel.com>
>> Cc: dev@dpdk.org; Yu, DapengX <dapengx.yu@intel.com>; stable@dpdk.org
>> Subject: RE: [dpdk-dev] [PATCH v2] net/ixgbe: fix fdirctrl register setting
>>
>> Tested-by: Zhou, Jun <junx.w.zhou@intel.com>
>>
>> -----Original Message-----
>> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of
>> dapengx.yu@intel.com
>> Sent: Tuesday, December 15, 2020 6:11 PM
>> To: Guo, Jia <jia.guo@intel.com>
>> Cc: dev@dpdk.org; Yu, DapengX <dapengx.yu@intel.com>; stable@dpdk.org
>> Subject: [dpdk-dev] [PATCH v2] net/ixgbe: fix fdirctrl register setting
>>
>> From: YU DAPENG <dapengx.yu@intel.com>
>>
>> The function ixgbe_fdir_set_flexbytes_offset is used when create FDir rule
>> for flexbytes. It set a register: FDIRCTRL.FLEX_OFFSET, which cause that even
>> if the FDir flexbytes rule is destroyed, the rule still direct the packet and
>> transfer it to the wrong place. It is because setting FDIRCTRL shall only be
>> permitted on Flow Director initialization flow or clearing the Flow Director
>> table according to intel datasheet, otherwise unexpected happens. In order
>> to evade the limit, add code to set FDIRCMD.CLEARHT to 1b and then clear it
>> back to 0b to make the setting act like the Flow Director initialization flow or
>> clearing the Flow Director table.
>>
>> Fixes: f35fec63dde1 ("net/ixgbe: enable flex bytes for generic flow API")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: YU DAPENG <dapengx.yu@intel.com>

Updating the commit log as following:

     net/ixgbe: fix flexbytes flow director rule

     When a flexbytes flow director rule is created, the FDIRCTRL.FLEX_OFFSET
     register is set, and it keeps its affect even after the flow director
     flexbytes rule is destroyed, causing packets to be transferred to the
     wrong place.

     It is because setting FDIRCTRL shall only be permitted on Flow Director
     initialization flow or clearing the Flow Director table according to the
     datasheet, otherwise device may behave unexpectedly.

     In order to evade this limitation, simulate the Flow Director
     initialization flow or clearing the Flow Director table by setting
     FDIRCMD.CLEARHT to 0x1B and then clear it back to 0x0B.

     Fixes: f35fec63dde1 ("net/ixgbe: enable flex bytes for generic flow API")
     Cc: stable@dpdk.org

     Signed-off-by: Dapeng Yu <dapengx.yu@intel.com>
     Tested-by: Jun Zhou <junx.w.zhou@intel.com>
     Acked-by: Jeff Guo <jia.guo@intel.com>

Please prefer the "Dapeng Yu <dapengx.yu@intel.com>" signature to be consistent.

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2021-01-05 12:10 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <20201211013506.49885-1-dapengx.yu@intel.com>
2020-12-15 10:10 ` [dpdk-stable] [PATCH v2] net/ixgbe: fix fdirctrl register setting dapengx.yu
2020-12-22  6:51   ` [dpdk-stable] [dpdk-dev] " Zhou, JunX W
2020-12-22  7:23     ` Guo, Jia
2021-01-05 12:09       ` Ferruh Yigit

patches for DPDK stable branches

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git