From: Wenjun Wu <wenjun1.wu@intel.com>
To: dev@dpdk.org, jia.guo@intel.com
Cc: Wenjun Wu <wenjun1.wu@intel.com>, stable@dpdk.org
Subject: [dpdk-stable] [PATCH v1] net/e1000: fix the invalid flow control mode setting
Date: Wed, 20 Jan 2021 12:58:59 +0800 [thread overview]
Message-ID: <20210120045859.211284-1-wenjun1.wu@intel.com> (raw)
E1000_CTRL register should be updated according to fc_conf->mode's value.
Fixes: af75078fece3 ("first public release")
Cc: stable@dpdk.org
Signed-off-by: Wenjun Wu <wenjun1.wu@intel.com>
---
drivers/net/e1000/igb_ethdev.c | 32 ++++++++++++++++++++++++++++++++
1 file changed, 32 insertions(+)
diff --git a/drivers/net/e1000/igb_ethdev.c b/drivers/net/e1000/igb_ethdev.c
index 647aa8d99..8fecd657d 100644
--- a/drivers/net/e1000/igb_ethdev.c
+++ b/drivers/net/e1000/igb_ethdev.c
@@ -3064,6 +3064,7 @@ eth_igb_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
uint32_t rx_buf_size;
uint32_t max_high_water;
uint32_t rctl;
+ uint32_t ctrl;
hw = E1000_DEV_PRIVATE_TO_HW(dev->data->dev_private);
if (fc_conf->autoneg != hw->mac.autoneg)
@@ -3101,6 +3102,37 @@ eth_igb_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
rctl &= ~E1000_RCTL_PMCF;
E1000_WRITE_REG(hw, E1000_RCTL, rctl);
+
+ /* check if we want to change flow control mode - driver doesn't have native
+ * capability to do that, so we'll write the registers ourselves */
+
+ ctrl = E1000_READ_REG(hw, E1000_CTRL);
+
+ /* set or clear E1000_CTRL_RFCE and E1000_CTRL_TFCE bits depending
+ * on configuration */
+
+ switch (fc_conf->mode) {
+ case RTE_FC_NONE:
+ ctrl &= ~E1000_CTRL_RFCE & ~E1000_CTRL_TFCE;
+ break;
+ case RTE_FC_RX_PAUSE:
+ ctrl |= E1000_CTRL_RFCE;
+ ctrl &= ~E1000_CTRL_TFCE;
+ break;
+ case RTE_FC_TX_PAUSE:
+ ctrl |= E1000_CTRL_TFCE;
+ ctrl &= ~E1000_CTRL_RFCE;
+ break;
+ case RTE_FC_FULL:
+ ctrl |= E1000_CTRL_RFCE | E1000_CTRL_TFCE;
+ break;
+ default:
+ PMD_INIT_LOG(ERR, "invalid flow control mode");
+ return -EIO;
+ }
+
+ E1000_WRITE_REG(hw, E1000_CTRL, ctrl);
+
E1000_WRITE_FLUSH(hw);
return 0;
--
2.25.1
next reply other threads:[~2021-01-26 9:08 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-20 4:58 Wenjun Wu [this message]
2021-01-20 5:55 ` Guo, Jia
-- strict thread matches above, loose matches on Subject: below --
2021-01-20 6:53 Wenjun Wu
2021-01-20 7:18 ` Guo, Jia
2021-01-20 23:35 ` Zhang, Qi Z
2021-01-19 6:58 Wenjun Wu
2021-01-19 7:43 ` Guo, Jia
2021-01-18 7:33 Wenjun Wu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210120045859.211284-1-wenjun1.wu@intel.com \
--to=wenjun1.wu@intel.com \
--cc=dev@dpdk.org \
--cc=jia.guo@intel.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).