From: Ferruh Yigit <ferruh.yigit@intel.com>
To: Wenzhuo Lu <wenzhuo.lu@intel.com>,
Xiaoyun Li <xiaoyun.li@intel.com>,
Bernard Iremonger <bernard.iremonger@intel.com>,
Steve Yang <stevex.yang@intel.com>
Cc: Ferruh Yigit <ferruh.yigit@intel.com>,
dev@dpdk.org, stable@dpdk.org,
Lance Richardson <lance.richardson@broadcom.com>,
Wisam Jaddo <wisamm@nvidia.com>, Bo Chen <box.c.chen@intel.com>,
oulijun@huawei.com, wisamm@mellanox.com, lihuisong@huawei.com
Subject: [dpdk-stable] [PATCH v6] app/testpmd: fix setting maximum packet length
Date: Thu, 28 Jan 2021 12:07:08 +0000 [thread overview]
Message-ID: <20210128120708.533872-1-ferruh.yigit@intel.com> (raw)
In-Reply-To: <20210125181548.2713326-1-ferruh.yigit@intel.com>
From: Steve Yang <stevex.yang@intel.com>
"port config all max-pkt-len" command fails because it doesn't set the
'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag properly.
Commit in the fixes line moved the 'DEV_RX_OFFLOAD_JUMBO_FRAME' offload
flag update from 'cmd_config_max_pkt_len_parsed()' to 'init_config()'.
'init_config()' function is only called during testpmd startup, but the
flag status needs to be calculated whenever 'max_rx_pkt_len' changes.
The issue can be reproduced as [1], where the 'max-pkt-len' reduced and
'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag should be cleared but it
didn't.
Adding the 'update_jumbo_frame_offload()' helper function to update
'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag and 'max_rx_pkt_len'. This
function is called both by 'init_config()' and
'cmd_config_max_pkt_len_parsed()'.
Default 'max-pkt-len' value set to zero, 'update_jumbo_frame_offload()'
updates it to "RTE_ETHER_MTU + PMD specific Ethernet overhead" when it
is zero.
If '--max-pkt-len=N' argument provided, it will be used instead.
And with each "port config all max-pkt-len" command, the
'DEV_RX_OFFLOAD_JUMBO_FRAME' offload flag, 'max-pkt-len' and MTU is
updated.
[1]
--------------------------------------------------------------------------
dpdk-testpmd -c 0xf -n 4 -- -i --max-pkt-len=9000 --tx-offloads=0x8000
--rxq=4 --txq=4 --disable-rss
testpmd> set verbose 3
testpmd> port stop all
testpmd> port config all max-pkt-len 1518
testpmd> port start all
// Got fail error info without this patch
Configuring Port 0 (socket 1)
Ethdev port_id=0 rx_queue_id=0, new added offloads 0x800 must be
within per-queue offload capabilities 0x0 in rte_eth_rx_queue_setup()
Fail to configure port 0 rx queues //<-- Fail error info;
--------------------------------------------------------------------------
Bugzilla ID: 625
Fixes: 761c4d66900f ("app/testpmd: fix max Rx packet length for VLAN packets")
Cc: stable@dpdk.org
Signed-off-by: Steve Yang <stevex.yang@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Lance Richardson <lance.richardson@broadcom.com>
Acked-by: Wisam Jaddo <wisamm@nvidia.com>
Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
Tested-by: Bo Chen <box.c.chen@intel.com>
---
v5:
* 'update_jumbo_frame_offload()' helper updated
* check zero 'max-pkt-len' value
* Update how queue offload flags updated
* Update MTU if JUMBO_FRAME flag is not set
* Default testpmd 'max-pkt-len' value set to zero
Cc: lance.richardson@broadcom.com
Cc: oulijun@huawei.com
Cc: wisamm@mellanox.com
Cc: lihuisong@huawei.com
v6:
* Comment wording updated
* Bugzilla id added to the commit log
---
app/test-pmd/cmdline.c | 13 ++++++
app/test-pmd/testpmd.c | 102 +++++++++++++++++++++++++++++++++--------
app/test-pmd/testpmd.h | 1 +
3 files changed, 97 insertions(+), 19 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index c6ace2dd2546..b338f5fe6333 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -1877,7 +1877,9 @@ cmd_config_max_pkt_len_parsed(void *parsed_result,
__rte_unused void *data)
{
struct cmd_config_max_pkt_len_result *res = parsed_result;
+ uint32_t max_rx_pkt_len_backup = 0;
portid_t pid;
+ int ret;
if (!all_ports_stopped()) {
printf("Please stop all ports first\n");
@@ -1896,7 +1898,18 @@ cmd_config_max_pkt_len_parsed(void *parsed_result,
if (res->value == port->dev_conf.rxmode.max_rx_pkt_len)
return;
+ ret = eth_dev_info_get_print_err(pid, &port->dev_info);
+ if (ret != 0) {
+ printf("rte_eth_dev_info_get() failed for port %u\n",
+ pid);
+ return;
+ }
+
+ max_rx_pkt_len_backup = port->dev_conf.rxmode.max_rx_pkt_len;
+
port->dev_conf.rxmode.max_rx_pkt_len = res->value;
+ if (update_jumbo_frame_offload(pid) != 0)
+ port->dev_conf.rxmode.max_rx_pkt_len = max_rx_pkt_len_backup;
} else {
printf("Unknown parameter\n");
return;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index c256e719aea2..555852ae5e42 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -443,8 +443,11 @@ lcoreid_t latencystats_lcore_id = -1;
* Ethernet device configuration.
*/
struct rte_eth_rxmode rx_mode = {
- .max_rx_pkt_len = RTE_ETHER_MAX_LEN,
- /**< Default maximum frame length. */
+ /* Default maximum frame length.
+ * Zero is converted to "RTE_ETHER_MTU + PMD Ethernet overhead"
+ * in init_config().
+ */
+ .max_rx_pkt_len = 0,
};
struct rte_eth_txmode tx_mode = {
@@ -1410,7 +1413,6 @@ init_config(void)
struct rte_gro_param gro_param;
uint32_t gso_types;
uint16_t data_size;
- uint16_t eth_overhead;
bool warning = 0;
int k;
int ret;
@@ -1447,22 +1449,10 @@ init_config(void)
rte_exit(EXIT_FAILURE,
"rte_eth_dev_info_get() failed\n");
- /* Update the max_rx_pkt_len to have MTU as RTE_ETHER_MTU */
- if (port->dev_info.max_mtu != UINT16_MAX &&
- port->dev_info.max_rx_pktlen > port->dev_info.max_mtu)
- eth_overhead = port->dev_info.max_rx_pktlen -
- port->dev_info.max_mtu;
- else
- eth_overhead =
- RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
-
- if (port->dev_conf.rxmode.max_rx_pkt_len <=
- (uint32_t)(RTE_ETHER_MTU + eth_overhead))
- port->dev_conf.rxmode.max_rx_pkt_len =
- RTE_ETHER_MTU + eth_overhead;
- else
- port->dev_conf.rxmode.offloads |=
- DEV_RX_OFFLOAD_JUMBO_FRAME;
+ ret = update_jumbo_frame_offload(pid);
+ if (ret != 0)
+ printf("Updating jumbo frame offload failed for port %u\n",
+ pid);
if (!(port->dev_info.tx_offload_capa &
DEV_TX_OFFLOAD_MBUF_FAST_FREE))
@@ -3358,6 +3348,80 @@ rxtx_port_config(struct rte_port *port)
}
}
+/*
+ * Helper function to arrange max_rx_pktlen value and JUMBO_FRAME offload,
+ * MTU is also aligned if JUMBO_FRAME offload is not set.
+ *
+ * port->dev_info should be set before calling this function.
+ *
+ * return 0 on success, negative on error
+ */
+int
+update_jumbo_frame_offload(portid_t portid)
+{
+ struct rte_port *port = &ports[portid];
+ uint32_t eth_overhead;
+ uint64_t rx_offloads;
+ int ret;
+ bool on;
+
+ /* Update the max_rx_pkt_len to have MTU as RTE_ETHER_MTU */
+ if (port->dev_info.max_mtu != UINT16_MAX &&
+ port->dev_info.max_rx_pktlen > port->dev_info.max_mtu)
+ eth_overhead = port->dev_info.max_rx_pktlen -
+ port->dev_info.max_mtu;
+ else
+ eth_overhead = RTE_ETHER_HDR_LEN + RTE_ETHER_CRC_LEN;
+
+ rx_offloads = port->dev_conf.rxmode.offloads;
+
+ /* Default config value is 0 to use PMD specific overhead */
+ if (port->dev_conf.rxmode.max_rx_pkt_len == 0)
+ port->dev_conf.rxmode.max_rx_pkt_len = RTE_ETHER_MTU + eth_overhead;
+
+ if (port->dev_conf.rxmode.max_rx_pkt_len <= RTE_ETHER_MTU + eth_overhead) {
+ rx_offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
+ on = false;
+ } else {
+ if ((port->dev_info.rx_offload_capa & DEV_RX_OFFLOAD_JUMBO_FRAME) == 0) {
+ printf("Frame size (%u) is not supported by port %u\n",
+ port->dev_conf.rxmode.max_rx_pkt_len,
+ portid);
+ return -1;
+ }
+ rx_offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ on = true;
+ }
+
+ if (rx_offloads != port->dev_conf.rxmode.offloads) {
+ uint16_t qid;
+
+ port->dev_conf.rxmode.offloads = rx_offloads;
+
+ /* Apply JUMBO_FRAME offload configuration to Rx queue(s) */
+ for (qid = 0; qid < port->dev_info.nb_rx_queues; qid++) {
+ if (on)
+ port->rx_conf[qid].offloads |= DEV_RX_OFFLOAD_JUMBO_FRAME;
+ else
+ port->rx_conf[qid].offloads &= ~DEV_RX_OFFLOAD_JUMBO_FRAME;
+ }
+ }
+
+ /* If JUMBO_FRAME is set MTU conversion done by ethdev layer,
+ * if unset do it here
+ */
+ if ((rx_offloads & DEV_RX_OFFLOAD_JUMBO_FRAME) == 0) {
+ ret = rte_eth_dev_set_mtu(portid,
+ port->dev_conf.rxmode.max_rx_pkt_len - eth_overhead);
+ if (ret)
+ printf("Failed to set MTU to %u for port %u\n",
+ port->dev_conf.rxmode.max_rx_pkt_len - eth_overhead,
+ portid);
+ }
+
+ return 0;
+}
+
void
init_port_config(void)
{
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 5f2316210726..2f8f5a92e46a 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -1005,6 +1005,7 @@ uint16_t tx_pkt_set_dynf(uint16_t port_id, __rte_unused uint16_t queue,
__rte_unused void *user_param);
void add_tx_dynf_callback(portid_t portid);
void remove_tx_dynf_callback(portid_t portid);
+int update_jumbo_frame_offload(portid_t portid);
/*
* Work-around of a compilation error with ICC on invocations of the
--
2.29.2
next prev parent reply other threads:[~2021-01-28 12:07 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20210125083202.38267-1-stevex.yang@intel.com>
2021-01-25 18:15 ` [dpdk-stable] [PATCH v5] " Ferruh Yigit
2021-01-25 19:41 ` Lance Richardson
2021-01-26 0:44 ` Ferruh Yigit
2021-01-26 3:22 ` Lance Richardson
2021-01-26 3:45 ` Lance Richardson
2021-01-26 7:54 ` Li, Xiaoyun
2021-01-26 11:01 ` Ferruh Yigit
2021-01-28 21:36 ` Lance Richardson
2021-01-28 22:12 ` Ferruh Yigit
2021-01-26 9:02 ` Wisam Monther
2021-01-27 3:04 ` Li, Xiaoyun
2021-01-28 1:57 ` Chen, BoX C
2021-01-28 9:18 ` Wisam Monther
2021-01-28 9:26 ` Ferruh Yigit
2021-01-28 11:08 ` Wisam Monther
2021-01-28 12:07 ` Ferruh Yigit [this message]
2021-01-29 9:34 ` [dpdk-stable] [PATCH v6] " Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210128120708.533872-1-ferruh.yigit@intel.com \
--to=ferruh.yigit@intel.com \
--cc=bernard.iremonger@intel.com \
--cc=box.c.chen@intel.com \
--cc=dev@dpdk.org \
--cc=lance.richardson@broadcom.com \
--cc=lihuisong@huawei.com \
--cc=oulijun@huawei.com \
--cc=stable@dpdk.org \
--cc=stevex.yang@intel.com \
--cc=wenzhuo.lu@intel.com \
--cc=wisamm@mellanox.com \
--cc=wisamm@nvidia.com \
--cc=xiaoyun.li@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).