From: Somnath Kotur <somnath.kotur@broadcom.com>
To: stable@dpdk.org
Cc: christian.ehrhardt@canonical.com,
Somnath Kotur <somnath.kotur@broadcom.com>,
Ajit Khaparde <ajit.khaparde@broadcom.com>
Subject: [dpdk-stable] [PATCH 19.11 1/2] net/bnxt: fix error handling in device start
Date: Fri, 19 Feb 2021 13:45:17 +0530 [thread overview]
Message-ID: <20210219081518.12097-1-somnath.kotur@broadcom.com> (raw)
[upstream commit 9d276b439aafab582c5e07e82ded75570b4dc9b4]
Call bnxt_dev_stop in error path of bnxt_dev_start_op() to keep
it simple and consistent
Fixes: c09f57b49c13 ("net/bnxt: add start/stop/link update operations")
Cc: stable@dpdk.org
Signed-off-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
---
drivers/net/bnxt/bnxt_ethdev.c | 136 ++++++++++++++++-----------------
1 file changed, 66 insertions(+), 70 deletions(-)
diff --git a/drivers/net/bnxt/bnxt_ethdev.c b/drivers/net/bnxt/bnxt_ethdev.c
index fc8532a464..e3f243cb86 100644
--- a/drivers/net/bnxt/bnxt_ethdev.c
+++ b/drivers/net/bnxt/bnxt_ethdev.c
@@ -831,76 +831,6 @@ static int bnxt_handle_if_change_status(struct bnxt *bp)
return rc;
}
-static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
-{
- struct bnxt *bp = eth_dev->data->dev_private;
- uint64_t rx_offloads = eth_dev->data->dev_conf.rxmode.offloads;
- int vlan_mask = 0;
- int rc, retry_cnt = BNXT_IF_CHANGE_RETRY_COUNT;
-
- if (!eth_dev->data->nb_tx_queues || !eth_dev->data->nb_rx_queues) {
- PMD_DRV_LOG(ERR, "Queues are not configured yet!\n");
- return -EINVAL;
- }
-
- if (bp->rx_cp_nr_rings > RTE_ETHDEV_QUEUE_STAT_CNTRS) {
- PMD_DRV_LOG(ERR,
- "RxQ cnt %d > CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS %d\n",
- bp->rx_cp_nr_rings, RTE_ETHDEV_QUEUE_STAT_CNTRS);
- }
-
- do {
- rc = bnxt_hwrm_if_change(bp, true);
- if (rc == 0 || rc != -EAGAIN)
- break;
-
- rte_delay_ms(BNXT_IF_CHANGE_RETRY_INTERVAL);
- } while (retry_cnt--);
-
- if (rc)
- return rc;
-
- if (bp->flags & BNXT_FLAG_IF_CHANGE_HOT_FW_RESET_DONE) {
- rc = bnxt_handle_if_change_status(bp);
- if (rc)
- return rc;
- }
-
- bnxt_enable_int(bp);
-
- rc = bnxt_init_chip(bp);
- if (rc)
- goto error;
-
- eth_dev->data->scattered_rx = bnxt_scattered_rx(eth_dev);
- eth_dev->data->dev_started = 1;
-
- bnxt_link_update_op(eth_dev, 1);
-
- if (rx_offloads & DEV_RX_OFFLOAD_VLAN_FILTER)
- vlan_mask |= ETH_VLAN_FILTER_MASK;
- if (rx_offloads & DEV_RX_OFFLOAD_VLAN_STRIP)
- vlan_mask |= ETH_VLAN_STRIP_MASK;
- rc = bnxt_vlan_offload_set_op(eth_dev, vlan_mask);
- if (rc)
- goto error;
-
- eth_dev->rx_pkt_burst = bnxt_receive_function(eth_dev);
- eth_dev->tx_pkt_burst = bnxt_transmit_function(eth_dev);
-
- bnxt_schedule_fw_health_check(bp);
-
- return 0;
-
-error:
- bnxt_shutdown_nic(bp);
- bnxt_free_tx_mbufs(bp);
- bnxt_free_rx_mbufs(bp);
- bnxt_hwrm_if_change(bp, false);
- eth_dev->data->dev_started = 0;
- return rc;
-}
-
static int bnxt_dev_set_link_up_op(struct rte_eth_dev *eth_dev)
{
struct bnxt *bp = eth_dev->data->dev_private;
@@ -974,6 +904,72 @@ static void bnxt_dev_stop_op(struct rte_eth_dev *eth_dev)
bp->rx_cosq_cnt = 0;
}
+static int bnxt_dev_start_op(struct rte_eth_dev *eth_dev)
+{
+ struct bnxt *bp = eth_dev->data->dev_private;
+ uint64_t rx_offloads = eth_dev->data->dev_conf.rxmode.offloads;
+ int vlan_mask = 0;
+ int rc, retry_cnt = BNXT_IF_CHANGE_RETRY_COUNT;
+
+ if (!eth_dev->data->nb_tx_queues || !eth_dev->data->nb_rx_queues) {
+ PMD_DRV_LOG(ERR, "Queues are not configured yet!\n");
+ return -EINVAL;
+ }
+
+ if (bp->rx_cp_nr_rings > RTE_ETHDEV_QUEUE_STAT_CNTRS) {
+ PMD_DRV_LOG(ERR,
+ "RxQ cnt %d > CONFIG_RTE_ETHDEV_QUEUE_STAT_CNTRS %d\n",
+ bp->rx_cp_nr_rings, RTE_ETHDEV_QUEUE_STAT_CNTRS);
+ }
+
+ do {
+ rc = bnxt_hwrm_if_change(bp, true);
+ if (rc == 0 || rc != -EAGAIN)
+ break;
+
+ rte_delay_ms(BNXT_IF_CHANGE_RETRY_INTERVAL);
+ } while (retry_cnt--);
+
+ if (rc)
+ return rc;
+
+ if (bp->flags & BNXT_FLAG_IF_CHANGE_HOT_FW_RESET_DONE) {
+ rc = bnxt_handle_if_change_status(bp);
+ if (rc)
+ return rc;
+ }
+
+ bnxt_enable_int(bp);
+
+ rc = bnxt_init_chip(bp);
+ if (rc)
+ goto error;
+
+ eth_dev->data->scattered_rx = bnxt_scattered_rx(eth_dev);
+ eth_dev->data->dev_started = 1;
+
+ bnxt_link_update_op(eth_dev, 1);
+
+ if (rx_offloads & DEV_RX_OFFLOAD_VLAN_FILTER)
+ vlan_mask |= ETH_VLAN_FILTER_MASK;
+ if (rx_offloads & DEV_RX_OFFLOAD_VLAN_STRIP)
+ vlan_mask |= ETH_VLAN_STRIP_MASK;
+ rc = bnxt_vlan_offload_set_op(eth_dev, vlan_mask);
+ if (rc)
+ goto error;
+
+ eth_dev->rx_pkt_burst = bnxt_receive_function(eth_dev);
+ eth_dev->tx_pkt_burst = bnxt_transmit_function(eth_dev);
+
+ bnxt_schedule_fw_health_check(bp);
+
+ return 0;
+
+error:
+ bnxt_dev_stop_op(eth_dev);
+ return rc;
+}
+
static void bnxt_dev_close_op(struct rte_eth_dev *eth_dev)
{
struct bnxt *bp = eth_dev->data->dev_private;
--
2.28.0.497.g54e85e7
next reply other threads:[~2021-02-19 8:15 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-02-19 8:15 Somnath Kotur [this message]
2021-02-19 8:15 ` [dpdk-stable] [PATCH 19.11 2/2] net/bnxt: fix lock init and destroy Somnath Kotur
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210219081518.12097-1-somnath.kotur@broadcom.com \
--to=somnath.kotur@broadcom.com \
--cc=ajit.khaparde@broadcom.com \
--cc=christian.ehrhardt@canonical.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).