[dpdk-stable] [PATCH] crypto/dpaa2_sec: fix the close and unint functions

[dpdk-stable] [PATCH] crypto/dpaa2_sec: fix the close and unint functions

[Hemant Agrawal]

The init function was calling the dpseci_open
while dpseci_close was called by the open function.
This is a mismatch un-init shall clean the init configurations and
close shall clear the configure function settings.

This was causing issue with recent changes in test framework, where
the close was being called and causing DPAA2 SEC to fail in configure

Fixes: e5cbdfc53765 ("crypto/dpaa2_sec: add basic operations")
Cc: stable@dpdk.org

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
---
 drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c | 50 ++++++++++-----------
 1 file changed, 24 insertions(+), 26 deletions(-)

diff --git a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
index 05b194ccf..1ccead364 100644
--- a/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
+++ b/drivers/crypto/dpaa2_sec/dpaa2_sec_dpseci.c
@@ -3564,32 +3564,10 @@ dpaa2_sec_dev_stop(struct rte_cryptodev *dev)
 }
 
 static int
-dpaa2_sec_dev_close(struct rte_cryptodev *dev)
+dpaa2_sec_dev_close(struct rte_cryptodev *dev __rte_unused)
 {
-	struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
-	struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
-	int ret;
-
 	PMD_INIT_FUNC_TRACE();
 
-	/* Function is reverse of dpaa2_sec_dev_init.
-	 * It does the following:
-	 * 1. Detach a DPSECI from attached resources i.e. buffer pools, dpbp_id
-	 * 2. Close the DPSECI device
-	 * 3. Free the allocated resources.
-	 */
-
-	/*Close the device at underlying layer*/
-	ret = dpseci_close(dpseci, CMD_PRI_LOW, priv->token);
-	if (ret) {
-		DPAA2_SEC_ERR("Failure closing dpseci device: err(%d)", ret);
-		return -1;
-	}
-
-	/*Free the allocated memory for ethernet private data and dpseci*/
-	priv->hw = NULL;
-	rte_free(dpseci);
-
 	return 0;
 }
 
@@ -3849,11 +3827,31 @@ static const struct rte_security_ops dpaa2_sec_security_ops = {
 static int
 dpaa2_sec_uninit(const struct rte_cryptodev *dev)
 {
-	struct dpaa2_sec_dev_private *internals = dev->data->dev_private;
+	struct dpaa2_sec_dev_private *priv = dev->data->dev_private;
+	struct fsl_mc_io *dpseci = (struct fsl_mc_io *)priv->hw;
+	int ret;
 
-	rte_free(dev->security_ctx);
+	PMD_INIT_FUNC_TRACE();
+
+	/* Function is reverse of dpaa2_sec_dev_init.
+	 * It does the following:
+	 * 1. Detach a DPSECI from attached resources i.e. buffer pools, dpbp_id
+	 * 2. Close the DPSECI device
+	 * 3. Free the allocated resources.
+	 */
 
-	rte_mempool_free(internals->fle_pool);
+	/*Close the device at underlying layer*/
+	ret = dpseci_close(dpseci, CMD_PRI_LOW, priv->token);
+	if (ret) {
+		DPAA2_SEC_ERR("Failure closing dpseci device: err(%d)", ret);
+		return -1;
+	}
+
+	/*Free the allocated memory for ethernet private data and dpseci*/
+	priv->hw = NULL;
+	rte_free(dpseci);
+	rte_free(dev->security_ctx);
+	rte_mempool_free(priv->fle_pool);
 
 	DPAA2_SEC_INFO("Closing DPAA2_SEC device %s on numa socket %u",
 		       dev->data->name, rte_socket_id());
-- 
2.17.1

Re: [dpdk-stable] [EXT] [PATCH] crypto/dpaa2_sec: fix the close and unint functions

[Akhil Goyal]

> The init function was calling the dpseci_open
> while dpseci_close was called by the open function.
> This is a mismatch un-init shall clean the init configurations and
> close shall clear the configure function settings.
> 
> This was causing issue with recent changes in test framework, where
> the close was being called and causing DPAA2 SEC to fail in configure
> 
> Fixes: e5cbdfc53765 ("crypto/dpaa2_sec: add basic operations")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
> ---
Applied to dpdk-next-crypto

Thanks.