[PATCH v3 11/25] net/axgbe: flow Tx Ctrl Registers are h/w version dependent

[Venkat Kumar Ande <venkatkumar.ande@amd.com>]

From: Venkat Kumar Ande <VenkatKumar.Ande@amd.com>

There is difference in the TX Flow Control registers (TFCR) between the
revisions of the hardware. The older revisions of hardware used to have
single register per queue. Whereas, the newer revision of hardware (from
ver 30H onwards) have one register per priority.

Without the fix the user will face problem in TX operation on new 30H HW

Fixes: 7c4158a5b592 ("net/axgbe: add DMA programming and start/stop")
Cc: stable@dpdk.org
Signed-off-by: Venkat Kumar Ande <VenkatKumar.Ande@amd.com>
Acked-by: Selwin Sebastian <selwin.sebastian@amd.com>
---
 drivers/net/axgbe/axgbe_dev.c | 25 +++++++++++++++----------
 1 file changed, 15 insertions(+), 10 deletions(-)

diff --git a/drivers/net/axgbe/axgbe_dev.c b/drivers/net/axgbe/axgbe_dev.c
index 9b0073eea6..5233633a53 100644
--- a/drivers/net/axgbe/axgbe_dev.c
+++ b/drivers/net/axgbe/axgbe_dev.c
@@ -269,20 +269,28 @@ static int axgbe_set_speed(struct axgbe_port *pdata, int speed)
 	return 0;
 }
 
+static unsigned int axgbe_get_fc_queue_count(struct axgbe_port *pdata)
+{
+	unsigned int max_q_count = AXGMAC_MAX_FLOW_CONTROL_QUEUES;
+
+	/* From MAC ver 30H the TFCR is per priority, instead of per queue */
+	if (AXGMAC_GET_BITS(pdata->hw_feat.version, MAC_VR, SNPSVER) >= 0x30)
+		return max_q_count;
+	else
+		return (RTE_MIN(pdata->tx_q_count, max_q_count));
+}
+
 static int axgbe_disable_tx_flow_control(struct axgbe_port *pdata)
 {
-	unsigned int max_q_count, q_count;
 	unsigned int reg, reg_val;
-	unsigned int i;
+	unsigned int i, q_count;
 
 	/* Clear MTL flow control */
 	for (i = 0; i < pdata->rx_q_count; i++)
 		AXGMAC_MTL_IOWRITE_BITS(pdata, i, MTL_Q_RQOMR, EHFC, 0);
 
 	/* Clear MAC flow control */
-	max_q_count = AXGMAC_MAX_FLOW_CONTROL_QUEUES;
-	q_count = RTE_MIN(pdata->tx_q_count,
-			max_q_count);
+	q_count = axgbe_get_fc_queue_count(pdata);
 	reg = MAC_Q0TFCR;
 	for (i = 0; i < q_count; i++) {
 		reg_val = AXGMAC_IOREAD(pdata, reg);
@@ -297,9 +305,8 @@ static int axgbe_disable_tx_flow_control(struct axgbe_port *pdata)
 
 static int axgbe_enable_tx_flow_control(struct axgbe_port *pdata)
 {
-	unsigned int max_q_count, q_count;
 	unsigned int reg, reg_val;
-	unsigned int i;
+	unsigned int i, q_count;
 
 	/* Set MTL flow control */
 	for (i = 0; i < pdata->rx_q_count; i++) {
@@ -316,9 +323,7 @@ static int axgbe_enable_tx_flow_control(struct axgbe_port *pdata)
 	}
 
 	/* Set MAC flow control */
-	max_q_count = AXGMAC_MAX_FLOW_CONTROL_QUEUES;
-	q_count = RTE_MIN(pdata->tx_q_count,
-			max_q_count);
+	q_count = axgbe_get_fc_queue_count(pdata);
 	reg = MAC_Q0TFCR;
 	for (i = 0; i < q_count; i++) {
 		reg_val = AXGMAC_IOREAD(pdata, reg);
-- 
2.34.1