From: Konstantin Ananyev <konstantin.ananyev@huawei.com>
To: <dev@dpdk.org>
Cc: <songx.jiale@intel.com>, <stephen@networkplumber.org>, <stable@dpdk.org>
Subject: [PATCH v3 1/2] examples/l3fwd: fix read beyond array bondaries
Date: Thu, 7 Nov 2024 13:50:51 -0500 [thread overview]
Message-ID: <20241107185052.64374-2-konstantin.ananyev@huawei.com> (raw)
In-Reply-To: <20241107185052.64374-1-konstantin.ananyev@huawei.com>
ASAN report:
ERROR: AddressSanitizer: unknown-crash on address 0x7ffffef92e32 at pc 0x00000053d1e9 bp 0x7ffffef92c00 sp 0x7ffffef92bf8
READ of size 16 at 0x7ffffef92e32 thread T0
#0 0x53d1e8 in _mm_loadu_si128 /usr/lib64/gcc/x86_64-suse-linux/11/include/emmintrin.h:703
#1 0x53d1e8 in send_packets_multi ../examples/l3fwd/l3fwd_sse.h:125
#2 0x53d1e8 in acl_send_packets ../examples/l3fwd/l3fwd_acl.c:1048
#3 0x53ec18 in acl_main_loop ../examples/l3fwd/l3fwd_acl.c:1127
#4 0x12151eb in rte_eal_mp_remote_launch ../lib/eal/common/eal_common_launch.c:83
#5 0x5bf2df in main ../examples/l3fwd/main.c:1647
#6 0x7f6d42a0d2bc in __libc_start_main (/lib64/libc.so.6+0x352bc)
#7 0x527499 in _start (/home/kananyev/dpdk-l3fwd-acl/x86_64-native-linuxapp-gcc-dbg-b1/examples/dpdk-l3fwd+0x527499)
Reason for that is that send_packets_multi() uses 16B loads to access
input dst_port[]and might read beyond array boundaries.
Right now, it doesn't cause any real issue - junk values are ignored, also
inside l3fwd we always allocate dst_port[] array on the stack, so
memory beyond it is always available.
Anyway, it probably need to be fixed.
The patch below simply allocates extra space for dst_port[], so
send_packets_multi() will never read beyond its boundaries.
Probably a better fix would be to change send_packets_multi()
itself to avoid access beyond 'nb_rx' entries.
Bugzilla ID: 1502
Fixes: 94c54b4158d5 ("examples/l3fwd: rework exact-match")
Cc: stable@dpdk.org
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@huawei.com>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
---
examples/l3fwd/l3fwd_acl.c | 2 +-
examples/l3fwd/l3fwd_altivec.h | 6 +++++-
examples/l3fwd/l3fwd_common.h | 7 +++++++
examples/l3fwd/l3fwd_em_hlm.h | 2 +-
examples/l3fwd/l3fwd_em_sequential.h | 2 +-
examples/l3fwd/l3fwd_fib.c | 2 +-
examples/l3fwd/l3fwd_lpm_altivec.h | 2 +-
examples/l3fwd/l3fwd_lpm_neon.h | 2 +-
examples/l3fwd/l3fwd_lpm_sse.h | 2 +-
examples/l3fwd/l3fwd_neon.h | 6 +++++-
examples/l3fwd/l3fwd_sse.h | 6 +++++-
11 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/examples/l3fwd/l3fwd_acl.c b/examples/l3fwd/l3fwd_acl.c
index b635011ef7..baa01e6dde 100644
--- a/examples/l3fwd/l3fwd_acl.c
+++ b/examples/l3fwd/l3fwd_acl.c
@@ -1056,7 +1056,7 @@ int
acl_main_loop(__rte_unused void *dummy)
{
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- uint16_t hops[MAX_PKT_BURST];
+ uint16_t hops[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
unsigned int lcore_id;
uint64_t prev_tsc, diff_tsc, cur_tsc;
int i, nb_rx;
diff --git a/examples/l3fwd/l3fwd_altivec.h b/examples/l3fwd/l3fwd_altivec.h
index e45e138e59..b91a6b5587 100644
--- a/examples/l3fwd/l3fwd_altivec.h
+++ b/examples/l3fwd/l3fwd_altivec.h
@@ -11,6 +11,9 @@
#include "altivec/port_group.h"
#include "l3fwd_common.h"
+#undef SENDM_PORT_OVERHEAD
+#define SENDM_PORT_OVERHEAD(x) ((x) + 2 * FWDSTEP)
+
/*
* Update source and destination MAC addresses in the ethernet header.
* Perform RFC1812 checks and updates for IPV4 packets.
@@ -117,7 +120,8 @@ process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
*/
static __rte_always_inline void
send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
- uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)],
+ int nb_rx)
{
int32_t k;
int j = 0;
diff --git a/examples/l3fwd/l3fwd_common.h b/examples/l3fwd/l3fwd_common.h
index 224b1c08e8..d94e5f1357 100644
--- a/examples/l3fwd/l3fwd_common.h
+++ b/examples/l3fwd/l3fwd_common.h
@@ -18,6 +18,13 @@
/* Minimum value of IPV4 total length (20B) in network byte order. */
#define IPV4_MIN_LEN_BE (sizeof(struct rte_ipv4_hdr) << 8)
+/*
+ * send_packet_multi() specific number of dest ports
+ * due to implementation we need to allocate array bigger then
+ * actual max number of elements in the array.
+ */
+#define SENDM_PORT_OVERHEAD(x) (x)
+
/*
* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2:
* - The IP version number must be 4.
diff --git a/examples/l3fwd/l3fwd_em_hlm.h b/examples/l3fwd/l3fwd_em_hlm.h
index 31cda9ddc1..c1d819997a 100644
--- a/examples/l3fwd/l3fwd_em_hlm.h
+++ b/examples/l3fwd/l3fwd_em_hlm.h
@@ -249,7 +249,7 @@ static inline void
l3fwd_em_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint16_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_em_process_packets(nb_rx, pkts_burst, dst_port, portid, qconf, 0);
send_packets_multi(qconf, pkts_burst, dst_port, nb_rx);
diff --git a/examples/l3fwd/l3fwd_em_sequential.h b/examples/l3fwd/l3fwd_em_sequential.h
index 067f23889a..3a40b2e434 100644
--- a/examples/l3fwd/l3fwd_em_sequential.h
+++ b/examples/l3fwd/l3fwd_em_sequential.h
@@ -79,7 +79,7 @@ l3fwd_em_send_packets(int nb_rx, struct rte_mbuf **pkts_burst,
uint16_t portid, struct lcore_conf *qconf)
{
int32_t i, j;
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
if (nb_rx > 0) {
rte_prefetch0(rte_pktmbuf_mtod(pkts_burst[0],
diff --git a/examples/l3fwd/l3fwd_fib.c b/examples/l3fwd/l3fwd_fib.c
index a0eef05a5d..e1eb8c61c8 100644
--- a/examples/l3fwd/l3fwd_fib.c
+++ b/examples/l3fwd/l3fwd_fib.c
@@ -121,7 +121,7 @@ fib_send_packets(int nb_rx, struct rte_mbuf **pkts_burst,
{
uint32_t ipv4_arr[nb_rx];
struct rte_ipv6_addr ipv6_arr[nb_rx];
- uint16_t hops[nb_rx];
+ uint16_t hops[SENDM_PORT_OVERHEAD(nb_rx)];
uint64_t hopsv4[nb_rx], hopsv6[nb_rx];
uint8_t type_arr[nb_rx];
uint32_t ipv4_cnt = 0, ipv6_cnt = 0;
diff --git a/examples/l3fwd/l3fwd_lpm_altivec.h b/examples/l3fwd/l3fwd_lpm_altivec.h
index adb82f1478..91aad5c313 100644
--- a/examples/l3fwd/l3fwd_lpm_altivec.h
+++ b/examples/l3fwd/l3fwd_lpm_altivec.h
@@ -145,7 +145,7 @@ static inline void
l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint8_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_lpm_process_packets(nb_rx, pkts_burst, portid, dst_port, qconf,
0);
diff --git a/examples/l3fwd/l3fwd_lpm_neon.h b/examples/l3fwd/l3fwd_lpm_neon.h
index 2a68c4c15e..3c1f827424 100644
--- a/examples/l3fwd/l3fwd_lpm_neon.h
+++ b/examples/l3fwd/l3fwd_lpm_neon.h
@@ -171,7 +171,7 @@ static inline void
l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint16_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_lpm_process_packets(nb_rx, pkts_burst, portid, dst_port, qconf,
0);
diff --git a/examples/l3fwd/l3fwd_lpm_sse.h b/examples/l3fwd/l3fwd_lpm_sse.h
index db15030320..50f1abbd8a 100644
--- a/examples/l3fwd/l3fwd_lpm_sse.h
+++ b/examples/l3fwd/l3fwd_lpm_sse.h
@@ -129,7 +129,7 @@ static inline void
l3fwd_lpm_send_packets(int nb_rx, struct rte_mbuf **pkts_burst, uint16_t portid,
struct lcore_conf *qconf)
{
- uint16_t dst_port[MAX_PKT_BURST];
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)];
l3fwd_lpm_process_packets(nb_rx, pkts_burst, portid, dst_port, qconf,
0);
diff --git a/examples/l3fwd/l3fwd_neon.h b/examples/l3fwd/l3fwd_neon.h
index 40807d5965..bc2bab8265 100644
--- a/examples/l3fwd/l3fwd_neon.h
+++ b/examples/l3fwd/l3fwd_neon.h
@@ -10,6 +10,9 @@
#include "neon/port_group.h"
#include "l3fwd_common.h"
+#undef SENDM_PORT_OVERHEAD
+#define SENDM_PORT_OVERHEAD(x) ((x) + 2 * FWDSTEP)
+
/*
* Update source and destination MAC addresses in the ethernet header.
* Perform RFC1812 checks and updates for IPV4 packets.
@@ -92,7 +95,8 @@ process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
*/
static __rte_always_inline void
send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
- uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)],
+ int nb_rx)
{
int32_t k;
int j = 0;
diff --git a/examples/l3fwd/l3fwd_sse.h b/examples/l3fwd/l3fwd_sse.h
index 083729cdef..6236b7873c 100644
--- a/examples/l3fwd/l3fwd_sse.h
+++ b/examples/l3fwd/l3fwd_sse.h
@@ -10,6 +10,9 @@
#include "sse/port_group.h"
#include "l3fwd_common.h"
+#undef SENDM_PORT_OVERHEAD
+#define SENDM_PORT_OVERHEAD(x) ((x) + 2 * FWDSTEP)
+
/*
* Update source and destination MAC addresses in the ethernet header.
* Perform RFC1812 checks and updates for IPV4 packets.
@@ -91,7 +94,8 @@ process_packet(struct rte_mbuf *pkt, uint16_t *dst_port)
*/
static __rte_always_inline void
send_packets_multi(struct lcore_conf *qconf, struct rte_mbuf **pkts_burst,
- uint16_t dst_port[MAX_PKT_BURST], int nb_rx)
+ uint16_t dst_port[SENDM_PORT_OVERHEAD(MAX_PKT_BURST)],
+ int nb_rx)
{
int32_t k;
int j = 0;
--
2.35.3
prev parent reply other threads:[~2024-11-07 18:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-26 19:43 [PATCH] " Konstantin Ananyev
[not found] ` <20240730122235.1084-1-konstantin.v.ananyev@yandex.ru>
2024-07-30 12:22 ` [PATCH v2 1/2] " Konstantin Ananyev
2024-10-10 0:30 ` Stephen Hemminger
[not found] ` <20241107185052.64374-1-konstantin.ananyev@huawei.com>
2024-11-07 18:50 ` Konstantin Ananyev [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241107185052.64374-2-konstantin.ananyev@huawei.com \
--to=konstantin.ananyev@huawei.com \
--cc=dev@dpdk.org \
--cc=songx.jiale@intel.com \
--cc=stable@dpdk.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).