From: luca.boccassi@gmail.com
To: Jie Hai <haijie1@huawei.com>
Cc: dpdk stable <stable@dpdk.org>
Subject: patch 'net/hns3: remove PVID info dump for VF' has been queued to stable release 22.11.8
Date: Mon, 17 Feb 2025 17:03:42 +0000 [thread overview]
Message-ID: <20250217170456.1068278-9-luca.boccassi@gmail.com> (raw)
In-Reply-To: <20250217170456.1068278-1-luca.boccassi@gmail.com>
Hi,
FYI, your patch has been queued to stable release 22.11.8
Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
It will be pushed if I get no objections before 02/19/25. So please
shout if anyone has objections.
Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.
Queued patches are on a temporary branch at:
https://github.com/bluca/dpdk-stable
This queued commit can be viewed at:
https://github.com/bluca/dpdk-stable/commit/4e3b40bb8a743cb142582d3c58ff6469c33f46d1
Thanks.
Luca Boccassi
---
From 4e3b40bb8a743cb142582d3c58ff6469c33f46d1 Mon Sep 17 00:00:00 2001
From: Jie Hai <haijie1@huawei.com>
Date: Mon, 30 Dec 2024 14:54:04 +0800
Subject: [PATCH] net/hns3: remove PVID info dump for VF
[ upstream commit 3c805c1ebe02248bb0c2ba944046c2e3354b0c11 ]
Since the PVID status obtained from kernel varies on different
platform, and the PVID of VF can be accessed by 'ip link show'
command, so remove it in case of misunderstanding.
Fixes: 871e5a4f881b ("net/hns3: dump VLAN configuration info")
Signed-off-by: Jie Hai <haijie1@huawei.com>
---
drivers/net/hns3/hns3_dump.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/hns3/hns3_dump.c b/drivers/net/hns3/hns3_dump.c
index bac4427227..22ac3de146 100644
--- a/drivers/net/hns3/hns3_dump.c
+++ b/drivers/net/hns3/hns3_dump.c
@@ -628,6 +628,10 @@ hns3_get_vlan_tx_offload_cfg(FILE *file, struct hns3_hw *hw)
static void
hns3_get_port_pvid_info(FILE *file, struct hns3_hw *hw)
{
+ struct hns3_adapter *hns = HNS3_DEV_HW_TO_ADAPTER(hw);
+ if (hns->is_vf)
+ return;
+
fprintf(file, " - pvid status: %s\n",
hw->port_base_vlan_cfg.state ? "On" : "Off");
}
--
2.47.2
---
Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- - 2025-02-17 16:13:17.217920359 +0000
+++ 0009-net-hns3-remove-PVID-info-dump-for-VF.patch 2025-02-17 16:13:16.790441593 +0000
@@ -1 +1 @@
-From 3c805c1ebe02248bb0c2ba944046c2e3354b0c11 Mon Sep 17 00:00:00 2001
+From 4e3b40bb8a743cb142582d3c58ff6469c33f46d1 Mon Sep 17 00:00:00 2001
@@ -5,0 +6,2 @@
+[ upstream commit 3c805c1ebe02248bb0c2ba944046c2e3354b0c11 ]
+
@@ -11 +12,0 @@
-Cc: stable@dpdk.org
@@ -19 +20 @@
-index 738dcb0c42..f21d32e6a2 100644
+index bac4427227..22ac3de146 100644
@@ -22 +23 @@
-@@ -693,6 +693,10 @@ hns3_get_vlan_tx_offload_cfg(FILE *file, struct hns3_hw *hw)
+@@ -628,6 +628,10 @@ hns3_get_vlan_tx_offload_cfg(FILE *file, struct hns3_hw *hw)
next prev parent reply other threads:[~2025-02-17 17:05 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-02-17 17:03 patch 'test/ring: fix init with custom number of lcores' " luca.boccassi
2025-02-17 17:03 ` patch 'vhost: clear ring addresses when getting vring base' " luca.boccassi
2025-02-17 17:03 ` patch 'vhost: check GSO size validity' " luca.boccassi
2025-02-17 17:03 ` patch 'crypto/cnxk: fix build with GCC 15' " luca.boccassi
2025-02-17 17:03 ` patch 'net/thunderx/base: " luca.boccassi
2025-02-17 17:03 ` patch 'eal/x86: fix some intrinsics header include for Windows' " luca.boccassi
2025-02-17 17:03 ` patch 'net/bonding: fix dedicated queue setup' " luca.boccassi
2025-02-17 17:03 ` patch 'net/hns3: fix mbuf freeing in simple Tx path' " luca.boccassi
2025-02-17 17:03 ` luca.boccassi [this message]
2025-02-17 17:03 ` patch 'net/hns3: rename RAS module' " luca.boccassi
2025-02-17 17:03 ` patch 'net/sfc: remove unnecessary assignment' " luca.boccassi
2025-02-17 17:03 ` patch 'net/mlx5: fix polling CQEs' " luca.boccassi
2025-02-17 17:03 ` patch 'net/iavf: remove reset of Tx prepare function pointer' " luca.boccassi
2025-02-17 17:03 ` patch 'net/ice: fix memory leak in scalar Rx' " luca.boccassi
2025-02-17 17:03 ` patch 'common/cnxk: fix atomic load in batch ops' " luca.boccassi
2025-02-17 17:03 ` patch 'common/cnxk: fix DPI mailbox structure' " luca.boccassi
2025-02-17 17:03 ` patch 'crypto/virtio: fix redundant queue free' " luca.boccassi
2025-02-17 17:03 ` patch 'crypto/openssl: fix CMAC auth context update' " luca.boccassi
2025-02-17 17:03 ` patch 'crypto/virtio: fix data queues iteration' " luca.boccassi
2025-02-17 17:03 ` patch 'net/enetfec: remove useless assignment' " luca.boccassi
2025-02-17 17:03 ` patch 'net/cnxk: fix NIX send header L3 type' " luca.boccassi
2025-02-17 17:03 ` patch 'eal/linux: fix memseg length in legacy mem init' " luca.boccassi
2025-02-17 17:03 ` patch 'use Python raw string notation' " luca.boccassi
2025-02-17 17:03 ` patch 'net/af_packet: fix socket close on device stop' " luca.boccassi
2025-02-17 17:03 ` patch 'ethdev: fix functions available in new device event' " luca.boccassi
2025-02-17 17:03 ` patch 'vhost: add null callback checks' " luca.boccassi
2025-02-17 17:04 ` patch 'build: force GCC 15 to initialize padding bits' " luca.boccassi
2025-02-17 17:04 ` patch 'net/bnxt: fix indication of allocation' " luca.boccassi
2025-02-17 17:04 ` patch 'net/bnxt: fix crash when representor is re-attached' " luca.boccassi
2025-02-17 17:04 ` patch 'net/mlx5: fix Netlink socket leak' " luca.boccassi
2025-02-17 17:04 ` patch 'net/mlx5: adjust actions per rule limitation' " luca.boccassi
2025-02-17 17:04 ` patch 'net/mlx5: fix flush of non-template flow rules' " luca.boccassi
2025-02-17 17:04 ` patch 'net/mlx5: fix GRE flow match with SWS' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix deadlock when writing i225 register' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix infinite loop' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix bitwise operation type' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: increase PHY power up delay' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: reset loop variable' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix LTR for i225' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix typo in LTR calculation' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix unused value' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix semaphore timeout " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix iterator type' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix MAC address hash bit shift' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix data type in MAC hash' " luca.boccassi
2025-02-17 17:04 ` patch 'net/igc/base: fix NVM data type in bit shift' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: fix semaphore timeout value' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: correct mPHY access logic' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: fix iterator type' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: fix MAC address hash bit shift' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: fix data type in MAC hash' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: fix uninitialized variable' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: fix bitwise operation type' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: fix NVM data type in bit shift' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: fix reset for 82580' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: fix unchecked return' " luca.boccassi
2025-02-17 17:04 ` patch 'net/e1000/base: skip management check for 82575' " luca.boccassi
2025-02-17 17:04 ` patch 'common/idpf: fix void function returning a value' " luca.boccassi
2025-02-17 17:04 ` patch 'net/intel: fix void functions " luca.boccassi
2025-02-17 17:04 ` patch 'net/intel: fix build with icx' " luca.boccassi
2025-02-17 17:04 ` patch 'net/hns3: fix copper port initialization' " luca.boccassi
2025-02-17 17:04 ` patch 'net/hns3: fix reset timeout' " luca.boccassi
2025-02-17 17:04 ` patch 'raw/cnxk_gpio: fix file descriptor leak' " luca.boccassi
2025-02-17 17:04 ` patch 'net/i40e: remove duplicate code' " luca.boccassi
2025-02-17 17:04 ` patch 'eal: fix devargs layers parsing out of bounds' " luca.boccassi
2025-02-17 17:04 ` patch 'net/qede: fix debug messages array' " luca.boccassi
2025-02-17 17:04 ` patch 'examples/ptpclient: fix message parsing' " luca.boccassi
2025-02-17 17:04 ` patch 'net/hinic: fix flow type bitmask overflow' " luca.boccassi
2025-02-17 17:04 ` patch 'crypto/dpaa2_sec: fix bitmask truncation' " luca.boccassi
2025-02-17 17:04 ` patch 'crypto/dpaa_sec: " luca.boccassi
2025-02-17 17:04 ` patch 'event/dpaa: " luca.boccassi
2025-02-17 17:04 ` patch 'net/dpaa: " luca.boccassi
2025-02-17 17:04 ` patch 'net/dpaa2: " luca.boccassi
2025-02-17 17:04 ` patch 'net/qede: fix nested loops' " luca.boccassi
2025-02-17 17:04 ` patch 'examples/l3fwd: fix socket ID check' " luca.boccassi
2025-02-17 17:04 ` patch 'common/cnxk: fix null " luca.boccassi
2025-02-17 17:04 ` patch 'eal/linux: remove useless assignments' " luca.boccassi
2025-02-17 17:04 ` patch 'mempool: fix errno in empty create' " luca.boccassi
2025-02-17 17:04 ` patch 'ethdev: convert string initialization' " luca.boccassi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250217170456.1068278-9-luca.boccassi@gmail.com \
--to=luca.boccassi@gmail.com \
--cc=haijie1@huawei.com \
--cc=stable@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).