patch 'net/hns3: fix copper port initialization' has been queued to stable release 23.11.4

[Xueming Li <xuemingl@nvidia.com>]

Hi,

FYI, your patch has been queued to stable release 23.11.4

Note it hasn't been pushed to http://dpdk.org/browse/dpdk-stable yet.
Please shout if anyone has objections.

Also note that after the patch there's a diff of the upstream commit vs the
patch applied to the branch. This will indicate if there was any rebasing
needed to apply to the stable branch. If there were code changes for rebasing
(ie: not only metadata diffs), please double check that the rebase was
correctly done.

Queued patches are on a temporary branch at:
https://git.dpdk.org/dpdk-stable/log/?h=23.11-staging

This queued commit can be viewed at:
https://git.dpdk.org/dpdk-stable/commit/?h=23.11-staging&id=e0999f779484a90d6622ffc2644f029329d6185a

Thanks.

Xueming Li <xuemingl@nvidia.com>

---
From e0999f779484a90d6622ffc2644f029329d6185a Mon Sep 17 00:00:00 2001
From: Dengdui Huang <huangdengdui@huawei.com>
Date: Mon, 10 Feb 2025 11:01:12 +0800
Subject: [PATCH] net/hns3: fix copper port initialization
Cc: Xueming Li <xuemingl@nvidia.com>

[ upstream commit 763546c33ea9600e76790c470d2921808068eb3d ]

The initialization of copper port contains the following two steps.
1. Configure firmware takeover the PHY. The firmware will start an
   asynchronous task to initialize the PHY chip.
2. Configure work speed and duplex.
In earlier versions of the firmware, when the asynchronous task is not
finished, the firmware will return -ENOTBLK in the second step. And this
will lead to driver failed to initialize. Here add retry for this case.

Fixes: 2e4859f3b362 ("net/hns3: support PF device with copper PHYs")

Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
---
 drivers/net/hns3/hns3_ethdev.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/net/hns3/hns3_ethdev.c b/drivers/net/hns3/hns3_ethdev.c
index dde27715c0..dd450cddaa 100644
--- a/drivers/net/hns3/hns3_ethdev.c
+++ b/drivers/net/hns3/hns3_ethdev.c
@@ -4852,7 +4852,7 @@ hns3_get_link_duplex(uint32_t link_speeds)
 }

 static int
-hns3_set_copper_port_link_speed(struct hns3_hw *hw,
+hns3_copper_port_link_speed_cfg(struct hns3_hw *hw,
 				struct hns3_set_link_speed_cfg *cfg)
 {
 	struct hns3_cmd_desc desc[HNS3_PHY_PARAM_CFG_BD_NUM];
@@ -4886,6 +4886,33 @@ hns3_set_copper_port_link_speed(struct hns3_hw *hw,
 	return hns3_cmd_send(hw, desc, HNS3_PHY_PARAM_CFG_BD_NUM);
 }

+static int
+hns3_set_copper_port_link_speed(struct hns3_hw *hw,
+				struct hns3_set_link_speed_cfg *cfg)
+{
+#define HNS3_PHY_PARAM_CFG_RETRY_TIMES		10
+#define HNS3_PHY_PARAM_CFG_RETRY_DELAY_MS	100
+	uint32_t retry_cnt = 0;
+	int ret;
+
+	/*
+	 * The initialization of copper port contains the following two steps.
+	 * 1. Configure firmware takeover the PHY. The firmware will start an
+	 *    asynchronous task to initialize the PHY chip.
+	 * 2. Configure work speed and duplex.
+	 * In earlier versions of the firmware, when the asynchronous task is not
+	 * finished, the firmware will return -ENOTBLK in the second step. And this
+	 * will lead to driver failed to initialize. Here add retry for this case.
+	 */
+	ret = hns3_copper_port_link_speed_cfg(hw, cfg);
+	while (ret == -ENOTBLK && retry_cnt++ < HNS3_PHY_PARAM_CFG_RETRY_TIMES) {
+		rte_delay_ms(HNS3_PHY_PARAM_CFG_RETRY_DELAY_MS);
+		ret = hns3_copper_port_link_speed_cfg(hw, cfg);
+	}
+
+	return ret;
+}
+
 static int
 hns3_set_autoneg(struct hns3_hw *hw, bool enable)
 {
--
2.34.1

---
  Diff of the applied patch vs upstream commit (please double-check if non-empty:
---
--- -	2025-02-18 19:39:03.217410402 +0800
+++ 0072-net-hns3-fix-copper-port-initialization.patch	2025-02-18 19:39:00.698244036 +0800
@@ -1 +1 @@
-From 763546c33ea9600e76790c470d2921808068eb3d Mon Sep 17 00:00:00 2001
+From e0999f779484a90d6622ffc2644f029329d6185a Mon Sep 17 00:00:00 2001
@@ -4,0 +5,3 @@
+Cc: Xueming Li <xuemingl@nvidia.com>
+
+[ upstream commit 763546c33ea9600e76790c470d2921808068eb3d ]
@@ -15 +17,0 @@
-Cc: stable@dpdk.org
@@ -23 +25 @@
-index 72d1c30a7b..9f7119b734 100644
+index dde27715c0..dd450cddaa 100644