patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Stephen Hemminger <stephen@networkplumber.org>
To: stable@dpdk.org
Cc: Stephen Hemminger <stephen@networkplumber.org>,
	Huisong Li <lihuisong@huawei.com>
Subject: [PATCH 22.11] test/bonding: fix active backup receive test
Date: Wed, 19 Feb 2025 09:34:10 -0800	[thread overview]
Message-ID: <20250219173423.596916-1-stephen@networkplumber.org> (raw)

[ upstream commit eb29e625ce41b50898efc8e2618b7eeb128460ed ]

The test had incorrect assumptions about how active backup
should work. When in active backup mode, the secondary (not primary)
ports should be ignored. The test was always broken since initially
written but earlier bug was masking the part of the test which
tested non-primary ports.

Bugzilla ID: 1589
Fixes: 112ce3917674 ("test/bonding: fix loop on members")

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Huisong Li <lihuisong@huawei.com>
Tested-by: Huisong Li <lihuisong@huawei.com>
---
 app/test/test_link_bonding.c | 77 +++++++++++++++++-------------------
 1 file changed, 37 insertions(+), 40 deletions(-)

diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
index 53f5c13a24..2ea4393476 100644
--- a/app/test/test_link_bonding.c
+++ b/app/test/test_link_bonding.c
@@ -2226,51 +2226,48 @@ test_activebackup_rx_burst(void)
 		virtual_ethdev_add_mbufs_to_rx_queue(test_params->slave_port_ids[i],
 				&gen_pkt_burst[0], burst_size);
 
-		/* Call rx burst on bonded device */
-		TEST_ASSERT_EQUAL(rte_eth_rx_burst(test_params->bonded_port_id, 0,
-				&rx_pkt_burst[0], MAX_PKT_BURST), burst_size,
-				"rte_eth_rx_burst failed");
-
-		if (test_params->slave_port_ids[i] == primary_port) {
-			/* Verify bonded device rx count */
-			rte_eth_stats_get(test_params->bonded_port_id, &port_stats);
-			TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
-					"Bonded Port (%d) ipackets value (%u) not as expected (%d)",
-					test_params->bonded_port_id,
-					(unsigned int)port_stats.ipackets, burst_size);
+		/* Expect burst if this was the active port, zero otherwise */
+		unsigned int rx_expect
+			= (test_params->member_port_ids[i] == primary_port) ? burst_size : 0;
+
+		/* Call rx burst on bonding device */
+		unsigned int rx_count = rte_eth_rx_burst(test_params->bonding_port_id, 0,
+							 &rx_pkt_burst[0], MAX_PKT_BURST);
+		TEST_ASSERT_EQUAL(rx_count, rx_expect,
+				  "rte_eth_rx_burst (%u) not as expected (%u)",
+				  rx_count, rx_expect);
+
+		/* Verify bonding device rx count */
+		rte_eth_stats_get(test_params->bonding_port_id, &port_stats);
+		TEST_ASSERT_EQUAL(port_stats.ipackets, rx_expect,
+				  "Bonding Port (%d) ipackets value (%u) not as expected (%u)",
+					test_params->bonding_port_id,
+				  (unsigned int)port_stats.ipackets, rx_expect);
+
+		for (j = 0; j < test_params->bonding_member_count; j++) {
+			rte_eth_stats_get(test_params->member_port_ids[j], &port_stats);
+			if (i == j) {
+				TEST_ASSERT_EQUAL(port_stats.ipackets, rx_expect,
+					  "Member Port (%d) ipackets (%u) not as expected (%d)",
+					  test_params->member_port_ids[i],
+					  (unsigned int)port_stats.ipackets, rx_expect);
 
-			/* Verify bonded slave devices rx count */
-			for (j = 0; j < test_params->bonded_slave_count; j++) {
-				rte_eth_stats_get(test_params->slave_port_ids[j], &port_stats);
-				if (i == j) {
-					TEST_ASSERT_EQUAL(port_stats.ipackets, (uint64_t)burst_size,
-							"Slave Port (%d) ipackets value (%u) not as "
-							"expected (%d)", test_params->slave_port_ids[i],
-							(unsigned int)port_stats.ipackets, burst_size);
-				} else {
-					TEST_ASSERT_EQUAL(port_stats.ipackets, 0,
-							"Slave Port (%d) ipackets value (%u) not as "
-							"expected (%d)\n", test_params->slave_port_ids[i],
-							(unsigned int)port_stats.ipackets, 0);
-				}
-			}
-		} else {
-			for (j = 0; j < test_params->bonded_slave_count; j++) {
-				rte_eth_stats_get(test_params->slave_port_ids[j], &port_stats);
+				/* reset member device stats */
+				rte_eth_stats_reset(test_params->member_port_ids[j]);
+			} else {
 				TEST_ASSERT_EQUAL(port_stats.ipackets, 0,
-						"Slave Port (%d) ipackets value (%u) not as expected "
-						"(%d)", test_params->slave_port_ids[i],
-						(unsigned int)port_stats.ipackets, 0);
+					  "Member Port (%d) ipackets (%u) not as expected (%d)",
+					  test_params->member_port_ids[i],
+					  (unsigned int)port_stats.ipackets, 0);
 			}
 		}
 
-		/* free mbufs */
-		for (i = 0; i < MAX_PKT_BURST; i++) {
-			if (rx_pkt_burst[i] != NULL) {
-				rte_pktmbuf_free(rx_pkt_burst[i]);
-				rx_pkt_burst[i] = NULL;
-			}
-		}
+		/* extract packets queued to inactive member */
+		if (rx_count == 0)
+			rx_count = rte_eth_rx_burst(test_params->member_port_ids[i], 0,
+						    rx_pkt_burst, MAX_PKT_BURST);
+		if (rx_count > 0)
+			rte_pktmbuf_free_bulk(rx_pkt_burst, rx_count);
 
 		/* reset bonded device stats */
 		rte_eth_stats_reset(test_params->bonded_port_id);
-- 
2.47.2


             reply	other threads:[~2025-02-19 17:34 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-02-19 17:34 Stephen Hemminger [this message]
2025-02-20 13:29 ` Luca Boccassi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250219173423.596916-1-stephen@networkplumber.org \
    --to=stephen@networkplumber.org \
    --cc=lihuisong@huawei.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).