patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Dekel Peled <dekelp@mellanox.com>
To: matan@mellanox.com, viacheslavo@mellanox.com
Cc: rasland@mellanox.com, orika@mellanox.com, dev@dpdk.org, stable@dpdk.org
Subject: [dpdk-stable] [PATCH] net/mlx5: fix set Rx hash fields only if needed
Date: Wed,  8 Jan 2020 17:44:23 +0200
Message-ID: <57bc3225d6cc2dfa0423a86d8ca99aab4ab39e55.1578497959.git.dekelp@mellanox.com> (raw)

Previous fix added translation of Rx hash fields to PRM format.

This patch optimizes the fix, to perform value translation only
if value is not zero.
In case value is zero, there is no need to translate it.

Fixes: 24753f9da454 ("net/mlx5: fix setting of Rx hash fields")
Cc: stable@dpdk.org

Signed-off-by: Dekel Peled <dekelp@mellanox.com>
Acked-by: Viacheslav Ovsiienko <viacheslavo@mellanox.com>
---
 drivers/net/mlx5/mlx5_rxq.c | 34 +++++++++++++++++++---------------
 1 file changed, 19 insertions(+), 15 deletions(-)

diff --git a/drivers/net/mlx5/mlx5_rxq.c b/drivers/net/mlx5/mlx5_rxq.c
index ca25e32..c936a7f 100644
--- a/drivers/net/mlx5/mlx5_rxq.c
+++ b/drivers/net/mlx5/mlx5_rxq.c
@@ -2460,7 +2460,6 @@ struct mlx5_hrxq *
 		}
 	} else { /* ind_tbl->type == MLX5_IND_TBL_TYPE_DEVX */
 		struct mlx5_devx_tir_attr tir_attr;
-		struct mlx5_rx_hash_field_select *rx_hash_field_select;
 		uint32_t i;
 		uint32_t lro = 1;
 
@@ -2474,23 +2473,27 @@ struct mlx5_hrxq *
 		memset(&tir_attr, 0, sizeof(tir_attr));
 		tir_attr.disp_type = MLX5_TIRC_DISP_TYPE_INDIRECT;
 		tir_attr.rx_hash_fn = MLX5_RX_HASH_FN_TOEPLITZ;
-#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
 		tir_attr.tunneled_offload_en = !!tunnel;
-		/* Translate hash_fields bitmap to PRM format. */
-		rx_hash_field_select = hash_fields & IBV_RX_HASH_INNER ?
-				       &tir_attr.rx_hash_field_selector_inner :
-				       &tir_attr.rx_hash_field_selector_outer;
+		/* If needed, translate hash_fields bitmap to PRM format. */
+		if (hash_fields) {
+#ifdef HAVE_IBV_DEVICE_TUNNEL_SUPPORT
+			struct mlx5_rx_hash_field_select *rx_hash_field_select =
+					hash_fields & IBV_RX_HASH_INNER ?
+					&tir_attr.rx_hash_field_selector_inner :
+					&tir_attr.rx_hash_field_selector_outer;
 #else
-		rx_hash_field_select = &tir_attr.rx_hash_field_selector_outer;
+			struct mlx5_rx_hash_field_select *rx_hash_field_select =
+					&tir_attr.rx_hash_field_selector_outer;
 #endif
-		/* 1 bit: 0: IPv4, 1: IPv6. */
-		rx_hash_field_select->l3_prot_type =
-			!!(hash_fields & MLX5_IPV6_IBV_RX_HASH);
-		/* 1 bit: 0: TCP, 1: UDP. */
-		rx_hash_field_select->l4_prot_type =
-			!!(hash_fields & MLX5_UDP_IBV_RX_HASH);
-		/* Bitmask which sets which fields to use in RX Hash. */
-		rx_hash_field_select->selected_fields =
+
+			/* 1 bit: 0: IPv4, 1: IPv6. */
+			rx_hash_field_select->l3_prot_type =
+				!!(hash_fields & MLX5_IPV6_IBV_RX_HASH);
+			/* 1 bit: 0: TCP, 1: UDP. */
+			rx_hash_field_select->l4_prot_type =
+				!!(hash_fields & MLX5_UDP_IBV_RX_HASH);
+			/* Bitmask which sets which fields to use in RX Hash. */
+			rx_hash_field_select->selected_fields =
 			((!!(hash_fields & MLX5_L3_SRC_IBV_RX_HASH)) <<
 			 MLX5_RX_HASH_FIELD_SELECT_SELECTED_FIELDS_SRC_IP) |
 			(!!(hash_fields & MLX5_L3_DST_IBV_RX_HASH)) <<
@@ -2499,6 +2502,7 @@ struct mlx5_hrxq *
 			 MLX5_RX_HASH_FIELD_SELECT_SELECTED_FIELDS_L4_SPORT |
 			(!!(hash_fields & MLX5_L4_DST_IBV_RX_HASH)) <<
 			 MLX5_RX_HASH_FIELD_SELECT_SELECTED_FIELDS_L4_DPORT;
+		}
 		if (rxq_ctrl->obj->type == MLX5_RXQ_OBJ_TYPE_DEVX_HAIRPIN)
 			tir_attr.transport_domain = priv->sh->td->id;
 		else
-- 
1.8.3.1


             reply	other threads:[~2020-01-08 15:45 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-08 15:44 Dekel Peled [this message]
2020-01-14  9:18 ` [dpdk-stable] [PATCH v2] net/mlx5: optimize Rx hash fields conversion Dekel Peled
2020-01-14 18:10   ` [dpdk-stable] [dpdk-dev] " Kevin Traynor
2020-01-15 21:19   ` [dpdk-stable] [PATCH v3] " Dekel Peled
2020-01-19 16:41     ` Raslan Darawsheh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=57bc3225d6cc2dfa0423a86d8ca99aab4ab39e55.1578497959.git.dekelp@mellanox.com \
    --to=dekelp@mellanox.com \
    --cc=dev@dpdk.org \
    --cc=matan@mellanox.com \
    --cc=orika@mellanox.com \
    --cc=rasland@mellanox.com \
    --cc=stable@dpdk.org \
    --cc=viacheslavo@mellanox.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

patches for DPDK stable branches

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git