Re: [dpdk-stable] [PATCH v4] net/mlx5: fix matching for UDP tunnels with verbs

[Raslan Darawsheh <rasland@mellanox.com>]

Hi,

> -----Original Message-----
> From: Raslan Darawsheh <rasland@mellanox.com>
> Sent: Wednesday, May 6, 2020 9:58 AM
> To: Slava Ovsiienko <viacheslavo@mellanox.com>; Matan Azrad
> <matan@mellanox.com>
> Cc: dev@dpdk.org; Ori Kam <orika@mellanox.com>; stable@dpdk.org
> Subject: [PATCH v4] net/mlx5: fix matching for UDP tunnels with verbs
> 
> When creating flow rule with zero specs it will cause
> matching all UDP packets like following:
>  eth / ipv4 / udp / vxlan / end
> Such rule will match all udp packets.
> 
> This change the behavior to match the dv flow engine
> which will automatically set the match on relative
> outer UDP port if the user didn't specify any.
> 
> Fixes: 84c406e74524 ("net/mlx5: add flow translate function")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Raslan Darawsheh <rasland@mellanox.com>
> Acked-by: Matan Azrad <matan@mellanox.com>
> ---
> v2: fixed checkpatch issues
> v3: handled ITEM_VOID after udp item.
> v4: removed extra unnecessary check for NULL
> ---
> 
>  drivers/net/mlx5/mlx5_flow_verbs.c | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/drivers/net/mlx5/mlx5_flow_verbs.c
> b/drivers/net/mlx5/mlx5_flow_verbs.c
> index 7efd97f54..24d4a7203 100644
> --- a/drivers/net/mlx5/mlx5_flow_verbs.c
> +++ b/drivers/net/mlx5/mlx5_flow_verbs.c
> @@ -680,6 +680,28 @@ flow_verbs_translate_item_udp(struct mlx5_flow
> *dev_flow,
>  		udp.val.src_port &= udp.mask.src_port;
>  		udp.val.dst_port &= udp.mask.dst_port;
>  	}
> +	item++;
> +	while (item->type == RTE_FLOW_ITEM_TYPE_VOID)
> +		item++;
> +	if (!(udp.val.dst_port & udp.mask.dst_port)) {
> +		switch ((item)->type) {
> +		case RTE_FLOW_ITEM_TYPE_VXLAN:
> +			udp.val.dst_port = htons(MLX5_UDP_PORT_VXLAN);
> +			udp.mask.dst_port = 0xffff;
> +			break;
> +		case RTE_FLOW_ITEM_TYPE_VXLAN_GPE:
> +			udp.val.dst_port =
> htons(MLX5_UDP_PORT_VXLAN_GPE);
> +			udp.mask.dst_port = 0xffff;
> +			break;
> +		case RTE_FLOW_ITEM_TYPE_MPLS:
> +			udp.val.dst_port = htons(MLX5_UDP_PORT_MPLS);
> +			udp.mask.dst_port = 0xffff;
> +			break;
> +		default:
> +			break;
> +		}
> +	}
> +
>  	flow_verbs_spec_add(&dev_flow->verbs, &udp, size);
>  }
> 
> --
> 2.26.0


Patch applied to next-net-mlx,

Kindest regards,
Raslan Darawsheh