patches for DPDK stable branches
 help / color / mirror / Atom feed
From: Gregory Etelson <getelson@nvidia.com>
To: "Li, Xiaoyun" <xiaoyun.li@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: Ajit Khaparde <ajit.khaparde@broadcom.com>,
	Olivier Matz <olivier.matz@6wind.com>,
	Andrew Rybchenko <andrew.rybchenko@oktetlabs.ru>,
	"Yigit, Ferruh" <ferruh.yigit@intel.com>,
	NBU-Contact-Thomas Monjalon <thomas@monjalon.net>,
	"stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-stable] [PATCH v2] app/testpmd: fix TX checksum calculation for tunnel
Date: Wed, 28 Jul 2021 03:45:39 +0000	[thread overview]
Message-ID: <BY5PR12MB48349948716DFC8E4238086CA5EA9@BY5PR12MB4834.namprd12.prod.outlook.com> (raw)
In-Reply-To: <DM4PR11MB5534FB3C0F2B542925F2A47999EA9@DM4PR11MB5534.namprd11.prod.outlook.com>

Hello,

Please see below.

Regards,
Gregory

> > Subject: [PATCH v2] app/testpmd: fix TX checksum calculation for
> > tunnel
> >
> > TX checksum of a tunnelled packet can be calculated for outer headers
> > only or for both outer and inner parts. The calculation method is
> > determined by application.
> > If TX checksum calculation can be offloaded, hardware ignores existing
> > checksum value and replaces it with an updated result.
> > If TX checksum is calculated by a software, existing value must be zeroed
> first.
> > The testpmd checksum forwarding engine always zeroed inner checksums.
> > If inner checksum calculation was offloaded, that header was left with
> > 0 checksum value.
> > Following outer software checksum calculation produced wrong value.
> > The patch zeroes inner IPv4 checksum only before software calculation.
> >
> > Fixes: 51f694dd40f5 ("app/testpmd: rework checksum forward engine")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Gregory Etelson <getelson@nvidia.com>
> > ---
> > v2:
> >  remove blank line between Fixes and Cc  explicitly compare with 0
> > value in `if ()`
> > ---
> >  app/test-pmd/csumonly.c | 23 ++++++++++++-----------
> >  1 file changed, 12 insertions(+), 11 deletions(-)
> >
> > diff --git a/app/test-pmd/csumonly.c b/app/test-pmd/csumonly.c index
> > 0161f72175..bd5ad64a57 100644
> > --- a/app/test-pmd/csumonly.c
> > +++ b/app/test-pmd/csumonly.c
> > @@ -480,17 +480,18 @@ process_inner_cksums(void *l3_hdr, const struct
> > testpmd_offload_info *info,
> >
> >       if (info->ethertype == _htons(RTE_ETHER_TYPE_IPV4)) {
> >               ipv4_hdr = l3_hdr;
> > -             ipv4_hdr->hdr_checksum = 0;
> >
> >               ol_flags |= PKT_TX_IPV4;
> >               if (info->l4_proto == IPPROTO_TCP && tso_segsz) {
> >                       ol_flags |= PKT_TX_IP_CKSUM;
> >               } else {
> > -                     if (tx_offloads & DEV_TX_OFFLOAD_IPV4_CKSUM)
> > +                     if (tx_offloads & DEV_TX_OFFLOAD_IPV4_CKSUM) {
> >                               ol_flags |= PKT_TX_IP_CKSUM;
> > -                     else
> > +                     } else if (ipv4_hdr->hdr_checksum != 0) {
> > +                             ipv4_hdr->hdr_checksum = 0;
> >                               ipv4_hdr->hdr_checksum =
> >                                       rte_ipv4_cksum(ipv4_hdr);
> > +                     }
> >               }
> >       } else if (info->ethertype == _htons(RTE_ETHER_TYPE_IPV6))
> >               ol_flags |= PKT_TX_IPV6; @@ -501,10 +502,10 @@
> > process_inner_cksums(void *l3_hdr, const struct testpmd_offload_info
> > *info,
> >               udp_hdr = (struct rte_udp_hdr *)((char *)l3_hdr + info->l3_len);
> >               /* do not recalculate udp cksum if it was 0 */
> >               if (udp_hdr->dgram_cksum != 0) {
> > -                     udp_hdr->dgram_cksum = 0;
> > -                     if (tx_offloads & DEV_TX_OFFLOAD_UDP_CKSUM)
> > +                     if (tx_offloads & DEV_TX_OFFLOAD_UDP_CKSUM) {
> >                               ol_flags |= PKT_TX_UDP_CKSUM;
> > -                     else {
> > +                     } else {
> 
> else if (udp_hdr->dgram_cksum != 0) { ?
>

process_inner_cksums() function verifies udp_hdr->dgram_cksum != 0
before checking for hardware / software offload capabilities in enclosing 
if() statement. No need to repeat that verification
 
> > +                             udp_hdr->dgram_cksum = 0;
> >                               udp_hdr->dgram_cksum =
> >                                       get_udptcp_checksum(l3_hdr, udp_hdr,
> >                                               info->ethertype); @@
> > -514,12 +515,12 @@ process_inner_cksums(void *l3_hdr, const struct
> > testpmd_offload_info *info,
> >                       ol_flags |= PKT_TX_UDP_SEG;
> >       } else if (info->l4_proto == IPPROTO_TCP) {
> >               tcp_hdr = (struct rte_tcp_hdr *)((char *)l3_hdr + info->l3_len);
> > -             tcp_hdr->cksum = 0;
> >               if (tso_segsz)
> >                       ol_flags |= PKT_TX_TCP_SEG;
> > -             else if (tx_offloads & DEV_TX_OFFLOAD_TCP_CKSUM)
> > +             else if (tx_offloads & DEV_TX_OFFLOAD_TCP_CKSUM) {
> >                       ol_flags |= PKT_TX_TCP_CKSUM;
> > -             else {
> > +             } else if (tcp_hdr->cksum != 0) {
> > +                     tcp_hdr->cksum = 0;
> >                       tcp_hdr->cksum =
> >                               get_udptcp_checksum(l3_hdr, tcp_hdr,
> >                                       info->ethertype); @@ -529,13
> > +530,13 @@ process_inner_cksums(void *l3_hdr, const struct
> > testpmd_offload_info *info,
> >       } else if (info->l4_proto == IPPROTO_SCTP) {
> >               sctp_hdr = (struct rte_sctp_hdr *)
> >                       ((char *)l3_hdr + info->l3_len);
> > -             sctp_hdr->cksum = 0;
> >               /* sctp payload must be a multiple of 4 to be
> >                * offloaded */
> >               if ((tx_offloads & DEV_TX_OFFLOAD_SCTP_CKSUM) &&
> >                       ((ipv4_hdr->total_length & 0x3) == 0)) {
> >                       ol_flags |= PKT_TX_SCTP_CKSUM;
> > -             } else {
> > +             } else if (sctp_hdr->cksum != 0) {
> > +                     sctp_hdr->cksum = 0;
> >                       /* XXX implement CRC32c, example available in
> >                        * RFC3309 */
> >               }
> > --
> > 2.32.0


  reply	other threads:[~2021-07-28  3:45 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-07-19  8:33 [dpdk-stable] [PATCH] " Gregory Etelson
2021-07-21  6:42 ` [dpdk-stable] [dpdk-dev] " Ori Kam
2021-07-24 11:37 ` Thomas Monjalon
2021-07-24 12:43   ` Gregory Etelson
2021-07-27 13:07 ` [dpdk-stable] [PATCH v2] " Gregory Etelson
2021-07-28  1:31   ` Li, Xiaoyun
2021-07-28  3:45     ` Gregory Etelson [this message]
2021-07-28  4:09   ` Ajit Khaparde
2021-07-28  5:07   ` Li, Xiaoyun
2021-07-28 14:12   ` Olivier Matz
2021-07-28 16:07     ` Gregory Etelson
2021-07-29  8:25       ` Olivier Matz
2021-07-29 10:31         ` Gregory Etelson
2021-07-29 16:02           ` Olivier Matz
2021-07-29  9:39 ` [dpdk-stable] [PATCH v3] " Gregory Etelson
2021-07-29 16:05   ` Olivier Matz
2021-07-29 17:05     ` Gregory Etelson
2021-07-29 17:01 ` [dpdk-stable] [PATCH v4] " Gregory Etelson
2021-07-30  8:39   ` Olivier Matz
2021-07-30 12:04     ` [dpdk-stable] [dpdk-dev] " Thomas Monjalon
2021-08-02 11:21       ` Jiang, YuX

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=BY5PR12MB48349948716DFC8E4238086CA5EA9@BY5PR12MB4834.namprd12.prod.outlook.com \
    --to=getelson@nvidia.com \
    --cc=ajit.khaparde@broadcom.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    --cc=ferruh.yigit@intel.com \
    --cc=olivier.matz@6wind.com \
    --cc=stable@dpdk.org \
    --cc=thomas@monjalon.net \
    --cc=xiaoyun.li@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).