patches for DPDK stable branches
 help / color / mirror / Atom feed
* [dpdk-stable] [PATCH v2] doc: fix testpmd sample qinq flow rules
       [not found] <1610623187-3631-1>
@ 2021-01-19 13:00 ` Bernard Iremonger
  2021-01-20  1:42   ` Li, Xiaoyun
  0 siblings, 1 reply; 3+ messages in thread
From: Bernard Iremonger @ 2021-01-19 13:00 UTC (permalink / raw)
  To: dev, xiaoyun.li; +Cc: Bernard Iremonger, stable

In the Testpmd Flow rules management section, correct
the TPID values in the Sample QinQ flow rules sub section.
Also replace the keyword qinq_strip with extend in the
vlan set command.

Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
Cc: stable@dpdk.org

Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
---
 doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index 9be4500..6a00245 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -4426,14 +4426,14 @@ Sample QinQ flow rules
 Before creating QinQ rule(s) the following commands should be issued to enable QinQ::
 
    testpmd> port stop 0
-   testpmd> vlan set qinq_strip on 0
+   testpmd> vlan set extend on 0
 
 The above command sets the inner and outer TPID's to 0x8100.
 
 To change the TPID's the following commands should be used::
 
-   testpmd> vlan set outer tpid 0xa100 0
-   testpmd> vlan set inner tpid 0x9100 0
+   testpmd> vlan set outer tpid 0x88A8 0
+   testpmd> vlan set inner tpid 0x8100 0
    testpmd> port start 0
 
 Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
-- 
2.7.4


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-stable] [PATCH v2] doc: fix testpmd sample qinq flow rules
  2021-01-19 13:00 ` [dpdk-stable] [PATCH v2] doc: fix testpmd sample qinq flow rules Bernard Iremonger
@ 2021-01-20  1:42   ` Li, Xiaoyun
  2021-02-02  9:59     ` Ferruh Yigit
  0 siblings, 1 reply; 3+ messages in thread
From: Li, Xiaoyun @ 2021-01-20  1:42 UTC (permalink / raw)
  To: Iremonger, Bernard, dev; +Cc: stable

Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>

> -----Original Message-----
> From: Iremonger, Bernard <bernard.iremonger@intel.com>
> Sent: Tuesday, January 19, 2021 21:01
> To: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>
> Cc: Iremonger, Bernard <bernard.iremonger@intel.com>; stable@dpdk.org
> Subject: [PATCH v2] doc: fix testpmd sample qinq flow rules
> 
> In the Testpmd Flow rules management section, correct the TPID values in the
> Sample QinQ flow rules sub section.
> Also replace the keyword qinq_strip with extend in the vlan set command.
> 
> Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
> ---
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index 9be4500..6a00245 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -4426,14 +4426,14 @@ Sample QinQ flow rules  Before creating QinQ
> rule(s) the following commands should be issued to enable QinQ::
> 
>     testpmd> port stop 0
> -   testpmd> vlan set qinq_strip on 0
> +   testpmd> vlan set extend on 0
> 
>  The above command sets the inner and outer TPID's to 0x8100.
> 
>  To change the TPID's the following commands should be used::
> 
> -   testpmd> vlan set outer tpid 0xa100 0
> -   testpmd> vlan set inner tpid 0x9100 0
> +   testpmd> vlan set outer tpid 0x88A8 0
> +   testpmd> vlan set inner tpid 0x8100 0
>     testpmd> port start 0
> 
>  Validate and create a QinQ rule on port 0 to steer traffic to a VF queue in a VM.
> --
> 2.7.4


^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [dpdk-stable] [PATCH v2] doc: fix testpmd sample qinq flow rules
  2021-01-20  1:42   ` Li, Xiaoyun
@ 2021-02-02  9:59     ` Ferruh Yigit
  0 siblings, 0 replies; 3+ messages in thread
From: Ferruh Yigit @ 2021-02-02  9:59 UTC (permalink / raw)
  To: Li, Xiaoyun, Iremonger, Bernard, dev; +Cc: stable

On 1/20/2021 1:42 AM, Li, Xiaoyun wrote:

>> -----Original Message-----
>> From: Iremonger, Bernard <bernard.iremonger@intel.com>
>> Sent: Tuesday, January 19, 2021 21:01
>> To: dev@dpdk.org; Li, Xiaoyun <xiaoyun.li@intel.com>
>> Cc: Iremonger, Bernard <bernard.iremonger@intel.com>; stable@dpdk.org
>> Subject: [PATCH v2] doc: fix testpmd sample qinq flow rules
>>
>> In the Testpmd Flow rules management section, correct the TPID values in the
>> Sample QinQ flow rules sub section.
>> Also replace the keyword qinq_strip with extend in the vlan set command.
>>
>> Fixes: bef3bfe7d5f4 ("doc: revise sample testpmd flow commands")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Bernard Iremonger <bernard.iremonger@intel.com>
 >
> Acked-by: Xiaoyun Li <xiaoyun.li@intel.com>
> 

Applied to dpdk-next-net/main, thanks.


^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2021-02-02 10:00 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <1610623187-3631-1>
2021-01-19 13:00 ` [dpdk-stable] [PATCH v2] doc: fix testpmd sample qinq flow rules Bernard Iremonger
2021-01-20  1:42   ` Li, Xiaoyun
2021-02-02  9:59     ` Ferruh Yigit

patches for DPDK stable branches

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/stable/0 stable/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 stable stable/ https://inbox.dpdk.org/stable \
		stable@dpdk.org
	public-inbox-index stable

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.stable


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git