patches for DPDK stable branches
 help / color / mirror / Atom feed
From: "Zhao1, Wei" <wei.zhao1@intel.com>
To: "Zhang, Qi Z" <qi.z.zhang@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "stable@dpdk.org" <stable@dpdk.org>
Subject: Re: [dpdk-stable] [PATCH v2 3/4] net/ice: add check for NVGRE protocol
Date: Tue, 23 Jun 2020 01:11:52 +0000	[thread overview]
Message-ID: <MWHPR11MB1391A856A48D405FD8165518B7940@MWHPR11MB1391.namprd11.prod.outlook.com> (raw)
In-Reply-To: <039ED4275CED7440929022BC67E7061154843048@SHSMSX103.ccr.corp.intel.com>



> -----Original Message-----
> From: Zhang, Qi Z <qi.z.zhang@intel.com>
> Sent: Monday, June 22, 2020 11:50 PM
> To: Zhao1, Wei <wei.zhao1@intel.com>; dev@dpdk.org
> Cc: stable@dpdk.org
> Subject: RE: [PATCH v2 3/4] net/ice: add check for NVGRE protocol
> 
> 
> 
> > -----Original Message-----
> > From: Zhao1, Wei <wei.zhao1@intel.com>
> > Sent: Wednesday, June 17, 2020 2:14 PM
> > To: dev@dpdk.org
> > Cc: stable@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>; Zhao1, Wei
> > <wei.zhao1@intel.com>
> > Subject: [PATCH v2 3/4] net/ice: add check for NVGRE protocol
> 
> fix tunnel type for switch rule
> 
> >
> > This patch add check for protocol type of IPv4 packet, it need to
> > update tunnel type when NVGRE is in payload.
> 
> The patch change default tunnel type to ICE_NON_TUN and only change to
> ICE_SW_TUN_AND_NON_TUN to hint switch engine if GRE proto is matched in
> a IPv4 header.
> 

Ok, Update in v3 
> >
> > Fixes: 6bc7628c5e0b ("net/ice: change default tunnel type")
> > Cc: stable@dpdk.org
> >
> > Signed-off-by: Wei Zhao <wei.zhao1@intel.com>
> > ---
> >  drivers/net/ice/ice_switch_filter.c | 7 ++++++-
> >  1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/net/ice/ice_switch_filter.c
> > b/drivers/net/ice/ice_switch_filter.c
> > index 3c0c36bce..3b38195d6 100644
> > --- a/drivers/net/ice/ice_switch_filter.c
> > +++ b/drivers/net/ice/ice_switch_filter.c
> > @@ -28,6 +28,7 @@
> >  #define MAX_QGRP_NUM_TYPE 7
> >  #define ICE_PPP_IPV4_PROTO	0x0021
> >  #define ICE_PPP_IPV6_PROTO	0x0057
> > +#define ICE_IPV4_PROTO_NVGRE	0x2F
> To keep consistent
> #define ICE_IPV4_NVGRE_PROTO 0x002F
> 

Ok, Update in v3

> >
> >  #define ICE_SW_INSET_ETHER ( \
> >  	ICE_INSET_DMAC | ICE_INSET_SMAC | ICE_INSET_ETHERTYPE) @@
> -632,6
> > +633,10 @@ ice_switch_inset_get(const struct rte_flow_item pattern[],
> >  					list[t].m_u.ipv4_hdr.protocol =
> >  						ipv4_mask->hdr.next_proto_id;
> >  				}
> > +				if ((ipv4_spec->hdr.next_proto_id &
> > +					ipv4_mask->hdr.next_proto_id) ==
> > +					ICE_IPV4_PROTO_NVGRE)
> > +					*tun_type = ICE_SW_TUN_AND_NON_TUN;
> >  				if (ipv4_mask->hdr.type_of_service) {
> >  					list[t].h_u.ipv4_hdr.tos =
> >  						ipv4_spec->hdr.type_of_service; @@ -1526,7
> +1531,7 @@
> > ice_switch_parse_pattern_action(struct ice_adapter *ad,
> >  	const struct rte_flow_item *item = pattern;
> >  	uint16_t item_num = 0;
> >  	enum ice_sw_tunnel_type tun_type =
> > -		ICE_SW_TUN_AND_NON_TUN;
> > +			ICE_NON_TUN;
> >  	struct ice_pattern_match_item *pattern_match_item = NULL;
> >
> >  	for (; item->type != RTE_FLOW_ITEM_TYPE_END; item++) {
> > --
> > 2.19.1
> 


  reply	other threads:[~2020-06-23  1:12 UTC|newest]

Thread overview: 44+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <20200605074031.16231-1-wei.zhao1@intel.com>
2020-06-05  7:40 ` [dpdk-stable] [PATCH 2/4] net/ice: add redirect support for VSI list rule Wei Zhao
2020-06-05  7:40 ` [dpdk-stable] [PATCH 3/4] net/ice: add check for NVGRE protocol Wei Zhao
2020-06-05  7:40 ` [dpdk-stable] [PATCH 4/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-17  6:14 ` [dpdk-stable] [PATCH v2 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-17  6:14   ` [dpdk-stable] [PATCH v2 1/4] net/ice: add support " Wei Zhao
2020-06-17  6:14   ` [dpdk-stable] [PATCH v2 2/4] net/ice: add redirect support for VSI list rule Wei Zhao
2020-06-22 15:25     ` Zhang, Qi Z
2020-06-17  6:14   ` [dpdk-stable] [PATCH v2 3/4] net/ice: add check for NVGRE protocol Wei Zhao
2020-06-22 15:49     ` Zhang, Qi Z
2020-06-23  1:11       ` Zhao1, Wei [this message]
2020-06-17  6:14   ` [dpdk-stable] [PATCH v2 4/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-22 15:36     ` Zhang, Qi Z
2020-06-23  1:12       ` Zhao1, Wei
2020-06-28  3:21   ` [dpdk-stable] [PATCH v3 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-28  3:21     ` [dpdk-stable] [PATCH v3 1/4] net/ice: add support " Wei Zhao
2020-06-28  3:21     ` [dpdk-stable] [PATCH v3 2/4] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-28  3:21     ` [dpdk-stable] [PATCH v3 3/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-28  3:21     ` [dpdk-stable] [PATCH v3 4/4] net/ice: add input set byte number check Wei Zhao
2020-06-28  5:01   ` [dpdk-stable] [PATCH v3 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-28  5:01     ` [dpdk-stable] [PATCH v3 1/4] net/ice: add support " Wei Zhao
2020-06-28  5:01     ` [dpdk-stable] [PATCH v3 2/4] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-28  5:01     ` [dpdk-stable] [PATCH v3 3/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-29  1:55       ` Zhang, Qi Z
2020-06-29  2:01         ` Zhao1, Wei
2020-06-28  5:01     ` [dpdk-stable] [PATCH v3 4/4] net/ice: add input set byte number check Wei Zhao
2020-06-28  5:28     ` [dpdk-stable] [PATCH v4 0/4] enable more PPPoE packet type for switch Wei Zhao
2020-06-28  5:28       ` [dpdk-stable] [PATCH v4 1/4] net/ice: add support " Wei Zhao
2020-06-28  5:28       ` [dpdk-stable] [PATCH v4 2/4] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-28  5:28       ` [dpdk-stable] [PATCH v4 3/4] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-28  5:28       ` [dpdk-stable] [PATCH v4 4/4] net/ice: add input set byte number check Wei Zhao
2020-06-29  5:10       ` [dpdk-stable] [PATCH v5 0/5] enable more PPPoE packet type for switch Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 1/5] net/ice: add support " Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 2/5] net/ice: fix tunnel type for switch rule Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 3/5] net/ice: support switch flow for specific L4 type Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 4/5] net/ice: add input set byte number check Wei Zhao
2020-06-29  5:10         ` [dpdk-stable] [PATCH v5 5/5] net/ice: fix typo Wei Zhao
2020-07-03  2:47         ` [dpdk-stable] [PATCH v5 0/5] enable more PPPoE packet type for switch Lu, Nannan
2020-07-03  6:19         ` [dpdk-stable] [PATCH v6 " Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 1/5] net/ice: add support more PPPoE packeat " Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 2/5] net/ice: fix tunnel type for switch rule Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 3/5] net/ice: support switch flow for specific L4 type Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 4/5] net/ice: add input set byte number check Wei Zhao
2020-07-03  6:19           ` [dpdk-stable] [PATCH v6 5/5] net/ice: fix typo Wei Zhao
2020-07-03 13:46           ` [dpdk-stable] [PATCH v6 0/5] enable more PPPoE packet type for switch Zhang, Qi Z

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=MWHPR11MB1391A856A48D405FD8165518B7940@MWHPR11MB1391.namprd11.prod.outlook.com \
    --to=wei.zhao1@intel.com \
    --cc=dev@dpdk.org \
    --cc=qi.z.zhang@intel.com \
    --cc=stable@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).