From: checkpatch@dpdk.org
To: test-report@dpdk.org
Cc: Lance Richardson <lance.richardson@broadcom.com>
Subject: [dpdk-test-report] |WARNING| pw53688 [PATCH v2 08/10] net/bnxt: update HWRM version
Date: Fri, 24 May 2019 16:52:22 +0200 (CEST) [thread overview]
Message-ID: <20190524145222.287311B946@dpdk.org> (raw)
In-Reply-To: <20190524144935.18765-9-lance.richardson@broadcom.com>
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 4460 bytes --]
Test-Label: checkpatch
Test-Status: WARNING
http://dpdk.org/patch/53688
_coding style issues_
WARNING:LONG_LINE_COMMENT: line over 90 characters
#176: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:1059:
+ * If set to 0, then the firmware doesn’t support the advance CFA flow management
WARNING:TYPO_SPELLING: 'occured' may be misspelled - perhaps 'occurred'?
#466: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:5457:
+ /* Indicates function ID that this event occured on. */
WARNING:LONG_LINE: line over 90 characters
#501: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:5486:
+ #define HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE \
WARNING:LONG_LINE: line over 90 characters
#504: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:5489:
+ HWRM_ASYNC_EVENT_CMPL_TCP_FLAG_ACTION_CHANGE_EVENT_ID_TCP_FLAG_ACTION_CHANGE
WARNING:TYPO_SPELLING: 'occured' may be misspelled - perhaps 'occurred'?
#565: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:5539:
+ /* Indicates the 2nd global id this event occured on. */
WARNING:TYPO_SPELLING: 'occured' may be misspelled - perhaps 'occurred'?
#622: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:5575:
+ /* Indicates the 1st global id this event occured on. */
WARNING:TYPO_SPELLING: 'occured' may be misspelled - perhaps 'occurred'?
#642: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:5595:
+ * Indicates EEM flow aging mode this event occured on. If
WARNING:LONG_LINE_COMMENT: line over 90 characters
#1757: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:24194:
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#2326: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:27135:
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#2330: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:27139:
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#2373: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:27182:
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#2379: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:27188:
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#2539: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:27439:
+ * flow table specified. This flag is set to 0 by older driver. For older firmware,
WARNING:LONG_LINE_COMMENT: line over 90 characters
#2546: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:27446:
+ * context memory tables..etc. This flag is set to 0 by older driver. For older firmware,
WARNING:LONG_LINE_COMMENT: line over 90 characters
#2868: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:28232:
+ /* Enhance Generic Routing Encapsulation (GRE version 1) inside IP datagram payload */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#2877: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:28241:
+ /* IPV6 over virtual eXtensible Local Area Network with GPE header (IPV6oVXLANGPE) */
WARNING:LONG_LINE_COMMENT: line over 90 characters
#3304: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:28668:
+ * The maximum number of entries supported by EEM. When configuring the host memory
WARNING:LONG_LINE_COMMENT: line over 90 characters
#3307: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:28671:
+ * Any value that are not these values, the FW will round down to the closest support
WARNING:LONG_LINE_COMMENT: line over 90 characters
#3382: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:28746:
+ * Configured EEM with the given number of entries. All the EEM tables KEY0, KEY1,
WARNING:LONG_LINE_COMMENT: line over 90 characters
#3383: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:28747:
+ * RECORD, EFC all have the same number of entries and all tables will be configured
WARNING:LONG_LINE_COMMENT: line over 90 characters
#3655: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:29023:
+ * Value of 1 to indicate that the firmware support flow reset all operation through
WARNING:LONG_LINE: line over 90 characters
#3668: FILE: drivers/net/bnxt/hsi_struct_def_dpdk.h:29034:
+ #define HWRM_CFA_ADV_FLOW_MGNT_QCAPS_OUTPUT_FLAGS_NTUPLE_FLOW_DEST_FUNC_SUPPORTED \
total: 0 errors, 22 warnings, 0 checks, 3630 lines checked
parent reply other threads:[~2019-05-24 14:52 UTC|newest]
Thread overview: expand[flat|nested] mbox.gz Atom feed
[parent not found: <20190524144935.18765-9-lance.richardson@broadcom.com>]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20190524145222.287311B946@dpdk.org \
--to=checkpatch@dpdk.org \
--cc=lance.richardson@broadcom.com \
--cc=test-report@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).