* [dpdk-test-report] |FAILURE| pw62832 [PATCH] [v5, 1/1] net/octeontx2: add Rx/Tx burst mode get callbacks
@ 2019-11-11 12:44 dpdklab
0 siblings, 0 replies; only message in thread
From: dpdklab @ 2019-11-11 12:44 UTC (permalink / raw)
To: test-report; +Cc: dpdk-test-reports
[-- Attachment #1: Type: text/plain, Size: 8161 bytes --]
Test-Label: Performance-Testing
Test-Status: FAILURE
http://dpdk.org/patch/62832
_build patch failure_
Submitter: Sunil Kumar Kori <skori@marvell.com>
Date: Monday, November 11 2019 12:16:48
Applied on: CommitID:feba77e2fb797b4ddbe898b031aaf8d305f71c16
Apply patch set 62832 failed:
Configuration done using x86_64-native-linuxapp-gcc
== Build lib
== Build lib/librte_kvargs
== Build lib/librte_eal
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/mk/toolchain/gcc/rte.toolchain-compat.mk:30: AVX512 support disabled because of binutils 2.30. See Bug 97
== Build lib/librte_eal/common
== Build lib/librte_eal/linux
== Build lib/librte_eal/linux/eal
== Build lib/librte_pci
== Build lib/librte_ring
== Build lib/librte_stack
== Build lib/librte_mempool
== Build lib/librte_mbuf
== Build lib/librte_timer
== Build lib/librte_cfgfile
== Build lib/librte_net
== Build lib/librte_cmdline
== Build lib/librte_meter
== Build lib/librte_ethdev
== Build lib/librte_bbdev
== Build lib/librte_cryptodev
== Build lib/librte_security
== Build lib/librte_compressdev
== Build lib/librte_hash
== Build lib/librte_eventdev
== Build lib/librte_rawdev
== Build lib/librte_vhost
== Build lib/librte_efd
== Build lib/librte_lpm
== Build lib/librte_acl
== Build lib/librte_member
== Build lib/librte_ip_frag
== Build lib/librte_gro
== Build lib/librte_jobstats
== Build lib/librte_metrics
== Build lib/librte_bitratestats
== Build lib/librte_latencystats
== Build lib/librte_power
== Build lib/librte_sched
== Build lib/librte_kni
== Build lib/librte_port
== Build lib/librte_table
== Build lib/librte_flow_classify
== Build lib/librte_distributor
== Build lib/librte_pipeline
== Build lib/librte_reorder
== Build lib/librte_pdump
== Build lib/librte_gso
== Build lib/librte_bpf
== Build lib/librte_ipsec
== Build lib/librte_rcu
== Build buildtools
== Build buildtools/pmdinfogen
== Build kernel
== Build kernel/linux
== Build kernel/linux/igb_uio
Building modules, stage 2.
MODPOST 1 modules
== Build kernel/linux/kni
Building modules, stage 2.
MODPOST 1 modules
== Build drivers
== Build drivers/common
== Build drivers/common/cpt
== Build drivers/common/octeontx
== Build drivers/common/octeontx2
== Build drivers/common/dpaax
== Build drivers/bus
== Build drivers/bus/dpaa
== Build drivers/bus/fslmc
== Build drivers/bus/ifpga
== Build drivers/bus/pci
== Build drivers/bus/vdev
== Build drivers/bus/vmbus
== Build drivers/mempool
== Build drivers/mempool/bucket
== Build drivers/mempool/dpaa
== Build drivers/mempool/dpaa2
== Build drivers/mempool/ring
== Build drivers/mempool/stack
== Build drivers/mempool/octeontx
== Build drivers/mempool/octeontx2
== Build drivers/net
== Build drivers/net/af_packet
== Build drivers/net/ark
== Build drivers/net/atlantic
== Build drivers/net/avp
== Build drivers/net/axgbe
== Build drivers/net/bonding
== Build drivers/net/cxgbe
== Build drivers/net/dpaa
== Build drivers/net/dpaa2
== Build drivers/net/e1000
== Build drivers/net/ena
== Build drivers/net/enetc
== Build drivers/net/enic
== Build drivers/net/failsafe
== Build drivers/net/fm10k
== Build drivers/net/hinic
== Build drivers/net/hns3
== Build drivers/net/i40e
== Build drivers/net/iavf
== Build drivers/net/ice
== Build drivers/net/ipn3ke
== Build drivers/net/ixgbe
== Build drivers/net/liquidio
== Build drivers/net/memif
== Build drivers/net/netvsc
== Build drivers/net/nfp
== Build drivers/net/bnxt
== Build drivers/net/null
== Build drivers/net/octeontx
== Build drivers/net/octeontx2
CC otx2_ethdev_ops.o
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c: In function ‘otx2_rx_burst_mode_get’:
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c:235:32: error: ‘RTE_ETH_BURST_MODE_INFO_SIZE’ undeclared (first use in this function); did you mean ‘RTE_ETH_BURST_PER_QUEUE’?
ssize_t bytes = 0, str_size = RTE_ETH_BURST_MODE_INFO_SIZE, rc;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
RTE_ETH_BURST_PER_QUEUE
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c:235:32: note: each undeclared identifier is reported only once for each function it appears in
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c:253:23: error: ‘struct rte_eth_burst_mode’ has no member named ‘info’
rc = rte_strscpy(mode->info + bytes, burst_mode[dev->scalar_ena],
^~
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c:260:23: error: ‘struct rte_eth_burst_mode’ has no member named ‘info’
rc = rte_strscpy(mode->info + bytes, ", Rx Offloads:",
^~
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c:270:25: error: ‘struct rte_eth_burst_mode’ has no member named ‘info’
rc = rte_strscpy(mode->info + bytes,
^~
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c: In function ‘otx2_tx_burst_mode_get’:
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c:290:32: error: ‘RTE_ETH_BURST_MODE_INFO_SIZE’ undeclared (first use in this function); did you mean ‘RTE_ETH_BURST_PER_QUEUE’?
ssize_t bytes = 0, str_size = RTE_ETH_BURST_MODE_INFO_SIZE, rc;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~
RTE_ETH_BURST_PER_QUEUE
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c:308:23: error: ‘struct rte_eth_burst_mode’ has no member named ‘info’
rc = rte_strscpy(mode->info + bytes, burst_mode[dev->scalar_ena],
^~
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c:315:23: error: ‘struct rte_eth_burst_mode’ has no member named ‘info’
rc = rte_strscpy(mode->info + bytes, ", Tx Offloads:",
^~
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c:325:25: error: ‘struct rte_eth_burst_mode’ has no member named ‘info’
rc = rte_strscpy(mode->info + bytes,
^~
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/drivers/net/octeontx2/otx2_ethdev_ops.c: At top level:
cc1: error: unrecognized command line option ‘-Wno-address-of-packed-member’ [-Werror]
cc1: all warnings being treated as errors
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/mk/internal/rte.compile-pre.mk:114: recipe for target 'otx2_ethdev_ops.o' failed
make[6]: *** [otx2_ethdev_ops.o] Error 1
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/mk/rte.subdir.mk:35: recipe for target 'octeontx2' failed
make[5]: *** [octeontx2] Error 2
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/mk/rte.subdir.mk:35: recipe for target 'net' failed
make[4]: *** [net] Error 2
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/mk/rte.sdkbuild.mk:46: recipe for target 'drivers' failed
make[3]: *** [drivers] Error 2
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/mk/rte.sdkroot.mk:98: recipe for target 'all' failed
make[2]: *** [all] Error 2
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/mk/rte.sdkinstall.mk:60: recipe for target 'pre_install' failed
make[1]: *** [pre_install] Error 2
/home-local/jenkins-local/jenkins-agent/workspace/Apply-Custom-Patch-Set/dpdk/mk/rte.sdkroot.mk:77: recipe for target 'install' failed
make: *** [install] Error 2
https://lab.dpdk.org/results/dashboard/patchsets/8471/
UNH-IOL DPDK Performance Test Lab
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2019-11-11 12:44 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-11 12:44 [dpdk-test-report] |FAILURE| pw62832 [PATCH] [v5, 1/1] net/octeontx2: add Rx/Tx burst mode get callbacks dpdklab
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).