From: dpdklab@iol.unh.edu
To: test-report@dpdk.org
Cc: dpdk-test-reports@iol.unh.edu
Subject: |WARNING| pw122992-122994 [PATCH] [3/3] drivers: enhance the Tx queue affinity
Date: Fri, 3 Feb 2023 00:38:07 -0500 (EST) [thread overview]
Message-ID: <20230203053807.E1B70B370@noxus.dpdklab.iol.unh.edu> (raw)
[-- Attachment #1: Type: text/plain, Size: 4296 bytes --]
Test-Label: iol-testing
Test-Status: WARNING
http://dpdk.org/patch/122992
_apply patch failure_
Submitter: Jiawei Wang <jiaweiw@nvidia.com>
Date: Friday, February 03 2023 05:21:07
Applied on: CommitID:bc1db4f45af35c87e7d97db7a24d479674aa8a43
Apply patch set 122992-122994 failed:
Checking patch drivers/common/mlx5/mlx5_devx_cmds.c...
Hunk #1 succeeded at 1139 (offset -2 lines).
Checking patch drivers/common/mlx5/mlx5_devx_cmds.h...
Checking patch drivers/common/mlx5/mlx5_prm.h...
Hunk #1 succeeded at 898 (offset -7 lines).
error: while searching for:
* Table 1872 - Flow Table Fields Supported 2 Format
*/
struct mlx5_ifc_ft_fields_support_2_bits {
u8 reserved_at_0[0xd];
u8 hash_result[0x1];
u8 reserved_at_e[0x1];
u8 tunnel_header_2_3[0x1];
error: patch failed: drivers/common/mlx5/mlx5_prm.h:2044
Checking patch drivers/net/mlx5/linux/mlx5_os.c...
Checking patch drivers/net/mlx5/mlx5.h...
Applied patch drivers/common/mlx5/mlx5_devx_cmds.c cleanly.
Applied patch drivers/common/mlx5/mlx5_devx_cmds.h cleanly.
Applying patch drivers/common/mlx5/mlx5_prm.h with 1 reject...
Hunk #1 applied cleanly.
Rejected hunk #2.
Applied patch drivers/net/mlx5/linux/mlx5_os.c cleanly.
Applied patch drivers/net/mlx5/mlx5.h cleanly.
diff a/drivers/common/mlx5/mlx5_prm.h b/drivers/common/mlx5/mlx5_prm.h (rejected hunks)
@@ -2044,7 +2045,9 @@ struct mlx5_ifc_ft_fields_support_bits {
* Table 1872 - Flow Table Fields Supported 2 Format
*/
struct mlx5_ifc_ft_fields_support_2_bits {
- u8 reserved_at_0[0xd];
+ u8 reserved_at_0[0xa];
+ u8 lag_rx_port_affinity[0x1];
+ u8 reserved_at_c[0x2];
u8 hash_result[0x1];
u8 reserved_at_e[0x1];
u8 tunnel_header_2_3[0x1];
Checking patch doc/guides/nics/features/default.ini...
Checking patch doc/guides/nics/features/mlx5.ini...
Checking patch doc/guides/nics/mlx5.rst...
error: while searching for:
- key
- sequence
Matching on checksum and sequence needs MLNX_OFED 5.6+.
- The NIC egress flow rules on representor port are not supported.
- When using DV/verbs flow engine (``dv_flow_en`` = 1/0 respectively), Match on SPI field
in ESP header for group 0 needs MLNX_OFED 5.6+.
Statistics
----------
error: patch failed: doc/guides/nics/mlx5.rst:595
Checking patch drivers/net/mlx5/linux/mlx5_os.c...
error: drivers/net/mlx5/linux/mlx5_os.c: does not match index
Checking patch drivers/net/mlx5/mlx5.h...
error: drivers/net/mlx5/mlx5.h: does not match index
Checking patch drivers/net/mlx5/mlx5_flow.h...
Checking patch drivers/net/mlx5/mlx5_flow_dv.c...
Checking patch drivers/net/mlx5/mlx5_flow_hw.c...
Applied patch doc/guides/nics/features/default.ini cleanly.
Applied patch doc/guides/nics/features/mlx5.ini cleanly.
Applying patch doc/guides/nics/mlx5.rst with 1 reject...
Hunk #1 applied cleanly.
Rejected hunk #2.
Applied patch drivers/net/mlx5/mlx5_flow.h cleanly.
Applied patch drivers/net/mlx5/mlx5_flow_dv.c cleanly.
Applied patch drivers/net/mlx5/mlx5_flow_hw.c cleanly.
diff a/doc/guides/nics/mlx5.rst b/doc/guides/nics/mlx5.rst (rejected hunks)
@@ -595,13 +596,18 @@ Limitations
- key
- sequence
- Matching on checksum and sequence needs MLNX_OFED 5.6+.
+- Matching on checksum and sequence needs MLNX_OFED 5.6+.
- The NIC egress flow rules on representor port are not supported.
- When using DV/verbs flow engine (``dv_flow_en`` = 1/0 respectively), Match on SPI field
in ESP header for group 0 needs MLNX_OFED 5.6+.
+- Match on phy affinity:
+
+ - Supports NIC ingress flow in group 0.
+ - Supports E-Switch flow in group 0 and depends on
+ device-managed flow steering (DMFS) mode.
Statistics
----------
Checking patch drivers/common/mlx5/mlx5_prm.h...
error: drivers/common/mlx5/mlx5_prm.h: does not match index
Checking patch drivers/net/mlx5/mlx5.c...
Checking patch drivers/net/mlx5/mlx5_devx.c...
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
Checking patch drivers/net/mlx5/mlx5_tx.h...
Checking patch drivers/net/mlx5/mlx5_txq.c...
Applied patch drivers/net/mlx5/mlx5.c cleanly.
Applied patch drivers/net/mlx5/mlx5_devx.c cleanly.
Applied patch drivers/net/mlx5/mlx5_ethdev.c cleanly.
Applied patch drivers/net/mlx5/mlx5_tx.h cleanly.
Applied patch drivers/net/mlx5/mlx5_txq.c cleanly.
https://lab.dpdk.org/results/dashboard/patchsets/25193/
UNH-IOL DPDK Community Lab
reply other threads:[~2023-02-03 5:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20230203053807.E1B70B370@noxus.dpdklab.iol.unh.edu \
--to=dpdklab@iol.unh.edu \
--cc=dpdk-test-reports@iol.unh.edu \
--cc=test-report@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).