automatic DPDK test reports
 help / color / mirror / Atom feed
From: dpdklab@iol.unh.edu
To: test-report@dpdk.org
Cc: dpdk-test-reports@iol.unh.edu
Subject: |WARNING| pw125772 [PATCH] [v2] net/idpf: add VF support
Date: Tue,  4 Apr 2023 13:33:40 +0000 (UTC)	[thread overview]
Message-ID: <20230404133340.05C756012C@dpdk-ubuntu.dpdklab.iol.unh.edu> (raw)

Test-Label: iol-testing
Test-Status: WARNING
http://dpdk.org/patch/125772

_apply patch failure_

Submitter: Xing, Beilei <beilei.xing@intel.com>
Date: Tuesday, April 04 2023 12:49:37 
Applied on: CommitID:c682c8991963be243dcc3b7cdc9d6984a1961f4e
Apply patch set 125772 failed:

Checking patch drivers/net/idpf/idpf_ethdev.c...
error: while searching for:
	rte_eal_alarm_set(IDPF_ALARM_INTERVAL, idpf_dev_alarm_handler, adapter);
}

static struct idpf_ctlq_create_info idpf_ctlq_info[IDPF_CTLQ_NUM] = {
	{
		.type = IDPF_CTLQ_TYPE_MAILBOX_TX,

error: patch failed: drivers/net/idpf/idpf_ethdev.c:1128
error: while searching for:
	.other_caps = VIRTCHNL2_CAP_WB_ON_ITR
};

static int
idpf_adapter_ext_init(struct rte_pci_device *pci_dev, struct idpf_adapter_ext *adapter)
{

error: patch failed: drivers/net/idpf/idpf_ethdev.c:1201
error: while searching for:

	strncpy(adapter->name, pci_dev->device.name, PCI_PRI_STR_SIZE);

	idpf_hw_pf_reset(hw);
	ret = idpf_hw_pf_reset_check(hw);
	if (ret != 0) {
		PMD_INIT_LOG(ERR, "PF is still resetting");
		goto err_reset_check;
	}

	ret = idpf_hw_mbx_init(hw, idpf_ctlq_info);
	if (ret != 0) {
		PMD_INIT_LOG(ERR, "Failed to init mailbox");
		goto err_reset_check;
	}

	rte_memcpy(&base->caps, &req_caps, sizeof(struct virtchnl2_get_capabilities));

error: patch failed: drivers/net/idpf/idpf_ethdev.c:1217
Hunk #5 succeeded at 1280 (offset -157 lines).
Checking patch drivers/net/idpf/idpf_ethdev.h...
Applying patch drivers/net/idpf/idpf_ethdev.c with 3 rejects...
Hunk #1 applied cleanly.
Rejected hunk #2.
Rejected hunk #3.
Rejected hunk #4.
Hunk #5 applied cleanly.
Applied patch drivers/net/idpf/idpf_ethdev.h cleanly.
hint: Use 'git am --show-current-patch' to see the failed patch
diff a/drivers/net/idpf/idpf_ethdev.c b/drivers/net/idpf/idpf_ethdev.c	(rejected hunks)
@@ -1128,6 +1129,23 @@ idpf_dev_alarm_handler(void *param)
 	rte_eal_alarm_set(IDPF_ALARM_INTERVAL, idpf_dev_alarm_handler, adapter);
 }
 
+static int
+idpf_hw_vf_reset_check(struct idpf_hw *hw)
+{
+	uint32_t reg;
+	int i;
+
+	for (i = 0; i < IDPF_RESET_WAIT_CNT; i++) {
+		reg = IDPF_READ_REG(hw, VFGEN_RSTAT);
+		if (reg != 0xFFFFFFFF && (reg & VFGEN_RSTAT_VFR_STATE_M))
+			return 0;
+		rte_delay_ms(1000);
+	}
+
+	PMD_INIT_LOG(ERR, "VF reset timeout");
+	return -EBUSY;
+}
+
 static struct idpf_ctlq_create_info idpf_ctlq_info[IDPF_CTLQ_NUM] = {
 	{
 		.type = IDPF_CTLQ_TYPE_MAILBOX_TX,
@@ -1201,6 +1219,41 @@ static struct virtchnl2_get_capabilities req_caps = {
 	.other_caps = VIRTCHNL2_CAP_WB_ON_ITR
 };
 
+struct idpf_ctlq_create_info vf_ctlq_info[IDPF_CTLQ_NUM] = {
+	{
+		.type = IDPF_CTLQ_TYPE_MAILBOX_TX,
+		.id = IDPF_CTLQ_ID,
+		.len = IDPF_CTLQ_LEN,
+		.buf_size = IDPF_DFLT_MBX_BUF_SIZE,
+		.reg = {
+			.head = VF_ATQH,
+			.tail = VF_ATQT,
+			.len = VF_ATQLEN,
+			.bah = VF_ATQBAH,
+			.bal = VF_ATQBAL,
+			.len_mask = VF_ATQLEN_ATQLEN_M,
+			.len_ena_mask = VF_ATQLEN_ATQENABLE_M,
+			.head_mask = VF_ATQH_ATQH_M,
+		}
+	},
+	{
+		.type = IDPF_CTLQ_TYPE_MAILBOX_RX,
+		.id = IDPF_CTLQ_ID,
+		.len = IDPF_CTLQ_LEN,
+		.buf_size = IDPF_DFLT_MBX_BUF_SIZE,
+		.reg = {
+			.head = VF_ARQH,
+			.tail = VF_ARQT,
+			.len = VF_ARQLEN,
+			.bah = VF_ARQBAH,
+			.bal = VF_ARQBAL,
+			.len_mask = VF_ARQLEN_ARQLEN_M,
+			.len_ena_mask = VF_ARQLEN_ARQENABLE_M,
+			.head_mask = VF_ARQH_ARQH_M,
+		}
+	}
+};
+
 static int
 idpf_adapter_ext_init(struct rte_pci_device *pci_dev, struct idpf_adapter_ext *adapter)
 {
@@ -1217,17 +1270,32 @@ idpf_adapter_ext_init(struct rte_pci_device *pci_dev, struct idpf_adapter_ext *a
 
 	strncpy(adapter->name, pci_dev->device.name, PCI_PRI_STR_SIZE);
 
-	idpf_hw_pf_reset(hw);
-	ret = idpf_hw_pf_reset_check(hw);
-	if (ret != 0) {
-		PMD_INIT_LOG(ERR, "PF is still resetting");
-		goto err_reset_check;
-	}
+	if (hw->device_id == IDPF_DEV_ID_PF) {
+		idpf_hw_pf_reset(hw);
+		ret = idpf_hw_pf_reset_check(hw);
+		if (ret != 0) {
+			PMD_INIT_LOG(ERR, "PF is still resetting");
+			goto err_reset_check;
+		}
+
+		ret = idpf_hw_mbx_init(hw, idpf_ctlq_info);
+		if (ret != 0) {
+			PMD_INIT_LOG(ERR, "Failed to init mailbox");
+			goto err_reset_check;
+		}
+	} else if (hw->device_id == IDPF_DEV_ID_VF) {
+		ret = idpf_hw_vf_reset_check(hw);
+		if (ret != 0) {
+			PMD_INIT_LOG(ERR, "VF is still resetting");
+			goto err_reset_check;
+		}
+
+		ret = idpf_hw_mbx_init(hw, vf_ctlq_info);
+		if (ret != 0) {
+			PMD_INIT_LOG(ERR, "Failed to init mailbox");
+			goto err_reset_check;
+		}
 
-	ret = idpf_hw_mbx_init(hw, idpf_ctlq_info);
-	if (ret != 0) {
-		PMD_INIT_LOG(ERR, "Failed to init mailbox");
-		goto err_reset_check;
 	}
 
 	rte_memcpy(&base->caps, &req_caps, sizeof(struct virtchnl2_get_capabilities));

https://lab.dpdk.org/results/dashboard/patchsets/25918/

UNH-IOL DPDK Community Lab

             reply	other threads:[~2023-04-04 13:33 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-04-04 13:33 dpdklab [this message]
     [not found] <20230404124937.72970-1-beilei.xing@intel.com>
2023-04-04 13:00 ` |WARNING| pw125772 [PATCH v2] " qemudev

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230404133340.05C756012C@dpdk-ubuntu.dpdklab.iol.unh.edu \
    --to=dpdklab@iol.unh.edu \
    --cc=dpdk-test-reports@iol.unh.edu \
    --cc=test-report@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).