From mboxrd@z Thu Jan 1 00:00:00 1970
Return-Path: <test-report-bounces@dpdk.org>
Received: from mails.dpdk.org (mails.dpdk.org [217.70.189.124])
by inbox.dpdk.org (Postfix) with ESMTP id 5562A42E91
for <public@inbox.dpdk.org>; Mon, 17 Jul 2023 03:56:56 +0200 (CEST)
Received: from mails.dpdk.org (localhost [127.0.0.1])
by mails.dpdk.org (Postfix) with ESMTP id 2EFCE40698;
Mon, 17 Jul 2023 03:56:56 +0200 (CEST)
Received: from mail.loongson.cn (mail.loongson.cn [114.242.206.163])
by mails.dpdk.org (Postfix) with ESMTP id 8614F40698
for <test-report@dpdk.org>; Mon, 17 Jul 2023 03:56:54 +0200 (CEST)
Received: from loongson.cn (unknown [10.40.46.153])
by gateway (Coremail) with SMTP id _____8CxNvHhn7Rk8b8FAA--.15482S3;
Mon, 17 Jul 2023 09:56:49 +0800 (CST)
Received: from localhost.localdomain (unknown [10.40.46.153])
by localhost.localdomain (Coremail) with SMTP id
AQAAf8BxniPhn7RkKwMxAA--.29676S3;
Mon, 17 Jul 2023 09:56:49 +0800 (CST)
Received: from localhost.localdomain (localhost.localdomain [127.0.0.1])
by localhost.localdomain (8.15.2/8.15.2) with ESMTPS id 36H1gdGY3579455
(version=TLSv1.3 cipher=TLS_AES_256_GCM_SHA384 bits=256 verify=NOT);
Mon, 17 Jul 2023 09:42:39 +0800
Received: (from root@localhost)
by localhost.localdomain (8.15.2/8.15.2/Submit) id 36H1gZP23579454;
Mon, 17 Jul 2023 09:42:35 +0800
Date: Mon, 17 Jul 2023 09:42:35 +0800
From: qemudev@loongson.cn
Message-Id: <202307170142.36H1gZP23579454@localhost.localdomain>
Content-Type: text/plain; charset="utf-8"
Subject: |FAILURE| pw129564 [PATCH v2] app/test:subprocess synchronization of
parameters
In-Reply-To: <20230717014713.536297-1-kaisenx.you@intel.com>
References: <20230717014713.536297-1-kaisenx.you@intel.com>
To: test-report@dpdk.org
Cc: Kaisen You <kaisenx.you@intel.com>, zhoumin@loongson.cn
X-CM-TRANSID: AQAAf8BxniPhn7RkKwMxAA--.29676S3
X-CM-SenderInfo: pthp3vthy6z05rqj20fqof0/
X-Coremail-Antispam: 1Uk129KBjDUn29KB7ZKAUJUUUUU529EdanIXcx71UUUUU7KY7
ZEXasCq-sGcSsGvfJ3UbIjqfuFe4nvWSU5nxnvy29KBjDU0xBIdaVrnUUvcSsGvfC2Kfnx
nUUI43ZEXa7xR_UUUUUUUUU==
X-BeenThere: test-report@dpdk.org
X-Mailman-Version: 2.1.29
Precedence: list
List-Id: automatic DPDK test reports <test-report.dpdk.org>
List-Unsubscribe: <https://mails.dpdk.org/options/test-report>,
<mailto:test-report-request@dpdk.org?subject=unsubscribe>
List-Archive: <http://mails.dpdk.org/archives/test-report/>
List-Post: <mailto:test-report@dpdk.org>
List-Help: <mailto:test-report-request@dpdk.org?subject=help>
List-Subscribe: <https://mails.dpdk.org/listinfo/test-report>,
<mailto:test-report-request@dpdk.org?subject=subscribe>
Errors-To: test-report-bounces@dpdk.org
Test-Label: loongarch-unit-testing
Test-Status: FAILURE
http://dpdk.org/patch/129564
_Unit Testing FAIL_
Submitter: Kaisen You <kaisenx.you@intel.com>
Date: Mon, 17 Jul 2023 09:47:13 +0800
DPDK git baseline: Repo:dpdk
Branch: main
CommitID: 655eb37b18b1b0dc4d106acdf0dfedde01cfb224
129564 --> testing fail
Test environment and result as below:
+---------------------+----------------+
| Environment | dpdk_unit_test |
+---------------------+----------------+
| Loongnix-Server 8.3 | FAIL |
+---------------------+----------------+
Loongnix-Server 8.3
Kernel: 4.19.190+
Compiler: gcc 8.3
Test result details:
1/107 DPDK:fast-tests / acl_autotest OK 2.87s
2/107 DPDK:fast-tests / atomic_autotest OK 7.08s
3/107 DPDK:fast-tests / bitmap_autotest OK 0.07s
4/107 DPDK:fast-tests / bpf_autotest OK 0.07s
5/107 DPDK:fast-tests / bpf_convert_autotest OK 0.07s
6/107 DPDK:fast-tests / bitops_autotest OK 0.07s
7/107 DPDK:fast-tests / byteorder_autotest OK 0.07s
8/107 DPDK:fast-tests / cksum_autotest OK 0.07s
9/107 DPDK:fast-tests / cmdline_autotest OK 0.07s
10/107 DPDK:fast-tests / common_autotest OK 0.92s
11/107 DPDK:fast-tests / cpuflags_autotest OK 0.07s
12/107 DPDK:fast-tests / debug_autotest OK 0.97s
13/107 DPDK:fast-tests / devargs_autotest OK 0.12s
14/107 DPDK:fast-tests / eal_flags_c_opt_autotest OK 1.27s
15/107 DPDK:fast-tests / eal_flags_main_opt_autotest OK 0.32s
16/107 DPDK:fast-tests / eal_flags_n_opt_autotest OK 0.27s
17/107 DPDK:fast-tests / eal_flags_hpet_autotest OK 0.17s
18/107 DPDK:fast-tests / eal_flags_no_huge_autotest OK 0.32s
19/107 DPDK:fast-tests / eal_flags_a_opt_autotest OK 0.47s
20/107 DPDK:fast-tests / eal_flags_b_opt_autotest FAIL 0.32s exit status 255
21/107 DPDK:fast-tests / eal_flags_vdev_opt_autotest OK 0.27s
22/107 DPDK:fast-tests / eal_flags_r_opt_autotest OK 0.27s
23/107 DPDK:fast-tests / eal_flags_mem_autotest OK 0.77s
24/107 DPDK:fast-tests / eal_flags_file_prefix_autotest OK 22.57s
25/107 DPDK:fast-tests / eal_flags_misc_autotest OK 1.17s
26/107 DPDK:fast-tests / eal_fs_autotest OK 0.07s
27/107 DPDK:fast-tests / errno_autotest OK 0.07s
28/107 DPDK:fast-tests / ethdev_link_status OK 0.07s
29/107 DPDK:fast-tests / event_ring_autotest OK 0.07s
30/107 DPDK:fast-tests / fib_autotest OK 0.87s
31/107 DPDK:fast-tests / fib6_autotest OK 0.92s
32/107 DPDK:fast-tests / func_reentrancy_autotest OK 2.13s
33/107 DPDK:fast-tests / hash_autotest OK 1.02s
34/107 DPDK:fast-tests / interrupt_autotest OK 1.42s
35/107 DPDK:fast-tests / ipfrag_autotest OK 0.12s
36/107 DPDK:fast-tests / lcores_autotest OK 5.12s
37/107 DPDK:fast-tests / logs_autotest OK 0.07s
38/107 DPDK:fast-tests / lpm_autotest OK 5.95s
39/107 DPDK:fast-tests / lpm6_autotest OK 8.86s
40/107 DPDK:fast-tests / malloc_autotest OK 61.35s
41/107 DPDK:fast-tests / mbuf_autotest OK 5.33s
42/107 DPDK:fast-tests / mcslock_autotest OK 3.77s
43/107 DPDK:fast-tests / memcpy_autotest OK 6.98s
44/107 DPDK:fast-tests / memory_autotest OK 0.12s
45/107 DPDK:fast-tests / mempool_autotest OK 0.47s
46/107 DPDK:fast-tests / memzone_autotest OK 0.17s
47/107 DPDK:fast-tests / meter_autotest OK 0.07s
48/107 DPDK:fast-tests / multiprocess_autotest OK 0.27s
49/107 DPDK:fast-tests / per_lcore_autotest OK 0.17s
50/107 DPDK:fast-tests / pflock_autotest OK 0.92s
51/107 DPDK:fast-tests / prefetch_autotest OK 0.07s
52/107 DPDK:fast-tests / rcu_qsbr_autotest OK 0.62s
53/107 DPDK:fast-tests / pie_autotest OK 0.12s
54/107 DPDK:fast-tests / rib_autotest OK 10.35s
55/107 DPDK:fast-tests / rib6_autotest OK 10.35s
56/107 DPDK:fast-tests / ring_autotest OK 0.12s
57/107 DPDK:fast-tests / rwlock_test1_autotest OK 0.87s
58/107 DPDK:fast-tests / rwlock_rda_autotest OK 5.13s
59/107 DPDK:fast-tests / rwlock_rds_wrm_autotest OK 5.13s
60/107 DPDK:fast-tests / rwlock_rde_wro_autotest OK 5.13s
61/107 DPDK:fast-tests / sched_autotest OK 0.07s
62/107 DPDK:fast-tests / security_autotest OK 0.07s
63/107 DPDK:fast-tests / seqlock_autotest OK 2.07s
64/107 DPDK:fast-tests / spinlock_autotest OK 0.17s
65/107 DPDK:fast-tests / stack_autotest OK 0.87s
66/107 DPDK:fast-tests / stack_lf_autotest SKIP 0.07s exit status 77
67/107 DPDK:fast-tests / string_autotest OK 0.07s
68/107 DPDK:fast-tests / tailq_autotest OK 0.07s
69/107 DPDK:fast-tests / ticketlock_autotest OK 0.27s
70/107 DPDK:fast-tests / timer_autotest OK 3.97s
71/107 DPDK:fast-tests / user_delay_us OK 0.07s
72/107 DPDK:fast-tests / version_autotest OK 0.07s
73/107 DPDK:fast-tests / crc_autotest OK 0.07s
74/107 DPDK:fast-tests / distributor_autotest OK 1.27s
75/107 DPDK:fast-tests / eventdev_common_autotest OK 0.07s
76/107 DPDK:fast-tests / fbarray_autotest OK 0.12s
77/107 DPDK:fast-tests / hash_readwrite_func_autotest OK 6.43s
78/107 DPDK:fast-tests / ipsec_autotest SKIP 0.12s exit status 77
79/107 DPDK:fast-tests / kni_autotest SKIP 0.07s exit status 77
80/107 DPDK:fast-tests / kvargs_autotest OK 0.12s
81/107 DPDK:fast-tests / member_autotest OK 1.22s
82/107 DPDK:fast-tests / power_cpufreq_autotest SKIP 0.07s exit status 77
83/107 DPDK:fast-tests / power_autotest OK 0.07s
84/107 DPDK:fast-tests / power_kvm_vm_autotest SKIP 0.07s exit status 77
85/107 DPDK:fast-tests / power_intel_uncore_autotest SKIP 0.07s exit status 77
86/107 DPDK:fast-tests / reorder_autotest OK 0.12s
87/107 DPDK:fast-tests / service_autotest OK 2.82s
88/107 DPDK:fast-tests / thash_autotest OK 0.07s
89/107 DPDK:fast-tests / threads_autotest OK 0.27s
90/107 DPDK:fast-tests / trace_autotest OK 0.07s
91/107 DPDK:fast-tests / trace_autotest_with_traces OK 0.12s
92/107 DPDK:fast-tests / graph_autotest OK 0.07s
93/107 DPDK:fast-tests / node_list_dump OK 0.07s
94/107 DPDK:fast-tests / metrics_autotest OK 0.07s
95/107 DPDK:fast-tests / telemetry_json_autotest OK 0.07s
96/107 DPDK:fast-tests / telemetry_data_autotest OK 0.12s
97/107 DPDK:fast-tests / table_autotest OK 10.01s
98/107 DPDK:fast-tests / ring_pmd_autotest OK 0.07s
99/107 DPDK:fast-tests / event_eth_tx_adapter_autotest OK 1.72s
100/107 DPDK:fast-tests / bitratestats_autotest OK 0.07s
101/107 DPDK:fast-tests / latencystats_autotest OK 0.07s
102/107 DPDK:fast-tests / pdump_autotest OK 5.23s
103/107 DPDK:fast-tests / vdev_autotest OK 0.07s
104/107 DPDK:fast-tests / rawdev_autotest OK 0.07s
105/107 DPDK:fast-tests / pdcp_autotest SKIP 0.07s exit status 77
106/107 DPDK:fast-tests / compressdev_autotest SKIP 0.07s exit status 77
107/107 DPDK:fast-tests / telemetry_all OK 17.30s
Ok: 98
Expected Fail: 0
Fail: 1
Unexpected Pass: 0
Skipped: 8
Timeout: 0
Test logs for failed test cases:
================================================================================
DPDK:fast-tests / eal_flags_b_opt_autotest: FAIL
================================================================================
-------------------------------------stdout-------------------------------------
RTE>>eal_flags_b_opt_autotest
Running binary with argv[]:'/home/zhoumin/dpdk/build/app/test/dpdk-test' '--file-prefix=eal_flags_b_opt_autotest' '--proc-type=secondary' '-b' 'error' '-a' '0000:00:03.0' '-a' '0000:00:03.1' '-a' '0000:00:04.0' '-a' '0000:00:04.1' '-a' '0000:00:05.0' '-a' '0000:00:05.1' '-a' '0000:00:06.0' '-a' '0000:00:07.0' '-a' '0000:00:08.0' '-a' '0000:00:08.1' '-a' '0000:00:08.2' '-a' '0000:00:0b.0' '-a' '0000:00:0d.0' '-a' '0000:00:0f.0' '-a' '0000:00:16.0' '-a' '0000:02:00.0' '-a' '0000:03:00.0' '-a' '0000:04:00.0' '-a' '0000:04:00.1'
Usage: /home/zhoumin/dpdk/build/app/test/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/dpdk/build/app/test/dpdk-test' '--file-prefix=eal_flags_b_opt_autotest' '--proc-type=secondary' '-b' '0:0:0' '-a' '0000:00:03.0' '-a' '0000:00:03.1' '-a' '0000:00:04.0' '-a' '0000:00:04.1' '-a' '0000:00:05.0' '-a' '0000:00:05.1' '-a' '0000:00:06.0' '-a' '0000:00:07.0' '-a' '0000:00:08.0' '-a' '0000:00:08.1' '-a' '0000:00:08.2' '-a' '0000:00:0b.0' '-a' '0000:00:0d.0' '-a' '0000:00:0f.0' '-a' '0000:00:16.0' '-a' '0000:02:00.0' '-a' '0000:03:00.0' '-a' '0000:04:00.0' '-a' '0000:04:00.1'
Usage: /home/zhoumin/dpdk/build/app/test/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/dpdk/build/app/test/dpdk-test' '--file-prefix=eal_flags_b_opt_autotest' '--proc-type=secondary' '-b' '0:error:0.1' '-a' '0000:00:03.0' '-a' '0000:00:03.1' '-a' '0000:00:04.0' '-a' '0000:00:04.1' '-a' '0000:00:05.0' '-a' '0000:00:05.1' '-a' '0000:00:06.0' '-a' '0000:00:07.0' '-a' '0000:00:08.0' '-a' '0000:00:08.1' '-a' '0000:00:08.2' '-a' '0000:00:0b.0' '-a' '0000:00:0d.0' '-a' '0000:00:0f.0' '-a' '0000:00:16.0' '-a' '0000:02:00.0' '-a' '0000:03:00.0' '-a' '0000:04:00.0' '-a' '0000:04:00.1'
Usage: /home/zhoumin/dpdk/build/app/test/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/dpdk/build/app/test/dpdk-test' '--file-prefix=eal_flags_b_opt_autotest' '--proc-type=secondary' '-b' '0:0:0.1error' '-a' '0000:00:03.0' '-a' '0000:00:03.1' '-a' '0000:00:04.0' '-a' '0000:00:04.1' '-a' '0000:00:05.0' '-a' '0000:00:05.1' '-a' '0000:00:06.0' '-a' '0000:00:07.0' '-a' '0000:00:08.0' '-a' '0000:00:08.1' '-a' '0000:00:08.2' '-a' '0000:00:0b.0' '-a' '0000:00:0d.0' '-a' '0000:00:0f.0' '-a' '0000:00:16.0' '-a' '0000:02:00.0' '-a' '0000:03:00.0' '-a' '0000:04:00.0' '-a' '0000:04:00.1'
Usage: /home/zhoumin/dpdk/build/app/test/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/dpdk/build/app/test/dpdk-test' '--file-prefix=eal_flags_b_opt_autotest' '--proc-type=secondary' '-b' 'error0:0:0.1' '-a' '0000:00:03.0' '-a' '0000:00:03.1' '-a' '0000:00:04.0' '-a' '0000:00:04.1' '-a' '0000:00:05.0' '-a' '0000:00:05.1' '-a' '0000:00:06.0' '-a' '0000:00:07.0' '-a' '0000:00:08.0' '-a' '0000:00:08.1' '-a' '0000:00:08.2' '-a' '0000:00:0b.0' '-a' '0000:00:0d.0' '-a' '0000:00:0f.0' '-a' '0000:00:16.0' '-a' '0000:02:00.0' '-a' '0000:03:00.0' '-a' '0000:04:00.0' '-a' '0000:04:00.1'
Usage: /home/zhoumin/dpdk/build/app/test/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/dpdk/build/app/test/dpdk-test' '--file-prefix=eal_flags_b_opt_autotest' '--proc-type=secondary' '-b' '0:0:0.1.2' '-a' '0000:00:03.0' '-a' '0000:00:03.1' '-a' '0000:00:04.0' '-a' '0000:00:04.1' '-a' '0000:00:05.0' '-a' '0000:00:05.1' '-a' '0000:00:06.0' '-a' '0000:00:07.0' '-a' '0000:00:08.0' '-a' '0000:00:08.1' '-a' '0000:00:08.2' '-a' '0000:00:0b.0' '-a' '0000:00:0d.0' '-a' '0000:00:0f.0' '-a' '0000:00:16.0' '-a' '0000:02:00.0' '-a' '0000:03:00.0' '-a' '0000:04:00.0' '-a' '0000:04:00.1'
Usage: /home/zhoumin/dpdk/build/app/test/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Running binary with argv[]:'/home/zhoumin/dpdk/build/app/test/dpdk-test' '--file-prefix=eal_flags_b_opt_autotest' '--proc-type=secondary' '-b' 'FF:09:0B.3' '-a' '0000:00:03.0' '-a' '0000:00:03.1' '-a' '0000:00:04.0' '-a' '0000:00:04.1' '-a' '0000:00:05.0' '-a' '0000:00:05.1' '-a' '0000:00:06.0' '-a' '0000:00:07.0' '-a' '0000:00:08.0' '-a' '0000:00:08.1' '-a' '0000:00:08.2' '-a' '0000:00:0b.0' '-a' '0000:00:0d.0' '-a' '0000:00:0f.0' '-a' '0000:00:16.0' '-a' '0000:02:00.0' '-a' '0000:03:00.0' '-a' '0000:04:00.0' '-a' '0000:04:00.1'
Usage: /home/zhoumin/dpdk/build/app/test/dpdk-test [options]
EAL common options:
-c COREMASK Hexadecimal bitmask of cores to run on
-l CORELIST List of cores to run on
The argument format is <c1>[-c2][,c3[-c4],...]
where c1, c2, etc are core indexes between 0 and 64
--lcores COREMAP Map lcore set to physical cpu set
The argument format is
'<lcores[@cpus]>[<,lcores[@cpus]>...]'
lcores and cpus list are grouped by '(' and ')'
Within the group, '-' is used for range separator,
',' is used for single number separator.
'( )' can be omitted for single element group,
'@' can be omitted if cpus and lcores have the same value
-s SERVICE COREMASK Hexadecimal bitmask of cores to be used as service cores
--main-lcore ID Core ID that is used as main
--mbuf-pool-ops-name Pool ops name for mbuf to use
-n CHANNELS Number of memory channels
-m MB Memory to allocate (see also --socket-mem)
-r RANKS Force number of memory ranks (don't detect)
-b, --block Add a device to the blocked list.
Prevent EAL from using this device. The argument
format for PCI devices is <domain:bus:devid.func>.
-a, --allow Add a device to the allow list.
Only use the specified devices. The argument format
for PCI devices is <[domain:]bus:devid.func>.
This option can be present several times.
[NOTE: allow cannot be used with block option]
--vdev Add a virtual device.
The argument format is <driver><id>[,key=val,...]
(ex: --vdev=net_pcap0,iface=eth2).
--iova-mode Set IOVA mode. 'pa' for IOVA_PA
'va' for IOVA_VA
-d LIB.so|DIR Add a driver or driver directory
(can be used multiple times)
--vmware-tsc-map Use VMware TSC map instead of native RDTSC
--proc-type Type of this process (primary|secondary|auto)
--syslog Set syslog facility
--log-level=<level> Set global log level
--log-level=<type-match>:<level>
Set specific log level
--log-level=help Show log types and levels
--trace=<regex-match>
Enable trace based on regular expression trace name.
By default, the trace is disabled.
User must specify this option to enable trace.
--trace-dir=<directory path>
Specify trace directory for trace output.
By default, trace output will created at
$HOME directory and parameter must be
specified once only.
--trace-bufsz=<int>
Specify maximum size of allocated memory
for trace output for each thread. Valid
unit can be either 'B|K|M' for 'Bytes',
'KBytes' and 'MBytes' respectively.
Default is 1MB and parameter must be
specified once only.
--trace-mode=<o[verwrite] | d[iscard]>
Specify the mode of update of trace
output file. Either update on a file can
be wrapped or discarded when file size
reaches its maximum limit.
Default mode is 'overwrite' and parameter
must be specified once only.
-v Display version information on startup
-h, --help This help
--in-memory Operate entirely in memory. This will
disable secondary process support
--base-virtaddr Base virtual address
--telemetry Enable telemetry support (on by default)
--no-telemetry Disable telemetry support
--force-max-simd-bitwidth Force the max SIMD bitwidth
EAL options for DEBUG use only:
--huge-unlink[=existing|always|never]
When to unlink files in hugetlbfs
('existing' by default, no value means 'always')
--no-huge Use malloc instead of hugetlbfs
--no-pci Disable PCI
--no-hpet Disable HPET
--no-shconf No shared config (mmap'd files)
EAL Linux options:
--socket-mem Memory to allocate on sockets (comma separated values)
--socket-limit Limit memory allocation on sockets (comma separated values)
--huge-dir Directory where hugetlbfs is mounted
--file-prefix Prefix for hugepage filenames
--create-uio-dev Create /dev/uioX (usually done by hotplug)
--vfio-intr Interrupt mode for VFIO (legacy|msi|msix)
--vfio-vf-token VF token (UUID) shared between SR-IOV PF and VFs
--legacy-mem Legacy memory mode (no dynamic allocation, contiguous segments)
--single-file-segments Put all hugepage memory in single files
--match-allocations Free hugepages exactly as allocated
--huge-worker-stack[=size]
Allocate worker thread stacks from hugepage memory.
Size is in units of kbytes and defaults to system
thread stack size if not specified.
Error - process did not run ok with valid blocklist value
Test Failed
RTE>>
-------------------------------------stderr-------------------------------------
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/eal_flags_b_opt_autotest/mp_socket
EAL: Selected IOVA mode 'PA'
TELEMETRY: No legacy callbacks, legacy socket not created
APP: HPET is not enabled, using TSC as default timer
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Options allow (-a) and block (-b) can't be used at the same time
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Options allow (-a) and block (-b) can't be used at the same time
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Options allow (-a) and block (-b) can't be used at the same time
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Options allow (-a) and block (-b) can't be used at the same time
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Options allow (-a) and block (-b) can't be used at the same time
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Options allow (-a) and block (-b) can't be used at the same time
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.
EAL: Detected CPU lcores: 32
EAL: Detected NUMA nodes: 8
EAL: Options allow (-a) and block (-b) can't be used at the same time
EAL: FATAL: Invalid 'command line' arguments.
EAL: Invalid 'command line' arguments.