From: sys_stv@intel.com
To: test-report@dpdk.org
Subject: [dpdk-test-report] |FAILURE| pw51670[2/3] net/mlx5: remove device register remap
Date: 25 Mar 2019 13:10:20 -0700 [thread overview]
Message-ID: <e75792$6fcba2@orsmga001.jf.intel.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 10063 bytes --]
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/51670
_apply issues_
Submitter: Yongseok Koh <yskoh@mellanox.com>
Date: 2019-03-25 19:36:26
Reply_mail: 20190325193627.19726-3-yskoh@mellanox.com
DPDK git baseline:
Repo:dpdk-master, CommitID: faf8c3095ac649f3d893ee846e2aa7cf1b4ccf4d
Repo:dpdk-next-eventdev, CommitID: 744407cf7b80f9e5c886c2304211b429febb4394
Repo:dpdk-next-net, CommitID: bc2e365a282b002c6eb0a29150252c7acd8e9f90
Repo:dpdk-next-crypto, CommitID: f36697d93cfe2a8f0707f7696e273d5e5969ffdb
Repo:dpdk-next-virtio, CommitID: 7f9cb2162e640ea87772ce0f2cbaf30a2d97d70d
*Repo: dpdk-master
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
/* Process local data for secondary processes. */
static struct mlx5_local_data mlx5_local_data;
/** Driver-specific log messages type. */
int mlx5_logtype;
error: patch failed: drivers/net/mlx5/mlx5.c:132
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
/* Global spinlock for primary and secondary processes. */
int init_done; /* Whether primary has done initialization. */
unsigned int secondary_cnt; /* Number of secondary processes init'd. */
void *uar_base;
/* Reserved UAR address space for TXQ UAR(hw doorbell) mapping. */
struct mlx5_dev_list mem_event_cb_list;
rte_rwlock_t mem_event_rwlock;
};
error: patch failed: drivers/net/mlx5/mlx5.h:97
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxtx.h...
Checking patch drivers/net/mlx5/mlx5_trigger.c...
Checking patch drivers/net/mlx5/mlx5_txq.c...
error: while searching for:
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_tx_uar_remap(struct rte_eth_dev *dev, int fd)
{
--
PROT_WRITE, MAP_FIXED | MAP_SHARED, fd,
txq_ctrl->uar_mmap_offset);
if (ret != addr) {
/* fixed mmap have to return same address */
DRV_LOG(ERR,
"port %u call to mmap failed on UAR"
" for txq %u",
dev->data->port_id, txq_ctrl->idx);
rte_errno = ENXIO;
return -rte_errno;
}
--
/* Assign a UAR lock according to UAR page number */
lock_idx = (txq_ctrl->uar_mmap_offset / page_size) &
MLX5_UAR_PAGE_NUM_MASK;
txq->uar_lock = &priv->uar_lock[lock_idx];
error: patch failed: drivers/net/mlx5/mlx5_txq.c:244
error: drivers/net/mlx5/mlx5_txq.c: patch does not apply
*Repo: dpdk-next-eventdev
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
/* Process local data for secondary processes. */
static struct mlx5_local_data mlx5_local_data;
/** Driver-specific log messages type. */
int mlx5_logtype;
error: patch failed: drivers/net/mlx5/mlx5.c:132
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
/* Global spinlock for primary and secondary processes. */
int init_done; /* Whether primary has done initialization. */
unsigned int secondary_cnt; /* Number of secondary processes init'd. */
void *uar_base;
/* Reserved UAR address space for TXQ UAR(hw doorbell) mapping. */
struct mlx5_dev_list mem_event_cb_list;
rte_rwlock_t mem_event_rwlock;
};
error: patch failed: drivers/net/mlx5/mlx5.h:97
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxtx.h...
Checking patch drivers/net/mlx5/mlx5_trigger.c...
Checking patch drivers/net/mlx5/mlx5_txq.c...
error: while searching for:
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_tx_uar_remap(struct rte_eth_dev *dev, int fd)
{
--
PROT_WRITE, MAP_FIXED | MAP_SHARED, fd,
txq_ctrl->uar_mmap_offset);
if (ret != addr) {
/* fixed mmap have to return same address */
DRV_LOG(ERR,
"port %u call to mmap failed on UAR"
" for txq %u",
dev->data->port_id, txq_ctrl->idx);
rte_errno = ENXIO;
return -rte_errno;
}
--
/* Assign a UAR lock according to UAR page number */
lock_idx = (txq_ctrl->uar_mmap_offset / page_size) &
MLX5_UAR_PAGE_NUM_MASK;
txq->uar_lock = &priv->uar_lock[lock_idx];
error: patch failed: drivers/net/mlx5/mlx5_txq.c:244
error: drivers/net/mlx5/mlx5_txq.c: patch does not apply
*Repo: dpdk-next-net
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
/* Process local data for secondary processes. */
static struct mlx5_local_data mlx5_local_data;
/** Driver-specific log messages type. */
int mlx5_logtype;
error: patch failed: drivers/net/mlx5/mlx5.c:132
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
/* Global spinlock for primary and secondary processes. */
int init_done; /* Whether primary has done initialization. */
unsigned int secondary_cnt; /* Number of secondary processes init'd. */
void *uar_base;
/* Reserved UAR address space for TXQ UAR(hw doorbell) mapping. */
struct mlx5_dev_list mem_event_cb_list;
rte_rwlock_t mem_event_rwlock;
};
error: patch failed: drivers/net/mlx5/mlx5.h:97
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxtx.h...
Checking patch drivers/net/mlx5/mlx5_trigger.c...
Checking patch drivers/net/mlx5/mlx5_txq.c...
error: while searching for:
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_tx_uar_remap(struct rte_eth_dev *dev, int fd)
{
--
PROT_WRITE, MAP_FIXED | MAP_SHARED, fd,
txq_ctrl->uar_mmap_offset);
if (ret != addr) {
/* fixed mmap have to return same address */
DRV_LOG(ERR,
"port %u call to mmap failed on UAR"
" for txq %u",
dev->data->port_id, txq_ctrl->idx);
rte_errno = ENXIO;
return -rte_errno;
}
--
/* Assign a UAR lock according to UAR page number */
lock_idx = (txq_ctrl->uar_mmap_offset / page_size) &
MLX5_UAR_PAGE_NUM_MASK;
txq->uar_lock = &priv->uar_lock[lock_idx];
error: patch failed: drivers/net/mlx5/mlx5_txq.c:244
error: drivers/net/mlx5/mlx5_txq.c: patch does not apply
*Repo: dpdk-next-crypto
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
/* Process local data for secondary processes. */
static struct mlx5_local_data mlx5_local_data;
/** Driver-specific log messages type. */
int mlx5_logtype;
error: patch failed: drivers/net/mlx5/mlx5.c:132
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
/* Global spinlock for primary and secondary processes. */
int init_done; /* Whether primary has done initialization. */
unsigned int secondary_cnt; /* Number of secondary processes init'd. */
void *uar_base;
/* Reserved UAR address space for TXQ UAR(hw doorbell) mapping. */
struct mlx5_dev_list mem_event_cb_list;
rte_rwlock_t mem_event_rwlock;
};
error: patch failed: drivers/net/mlx5/mlx5.h:97
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxtx.h...
Checking patch drivers/net/mlx5/mlx5_trigger.c...
Checking patch drivers/net/mlx5/mlx5_txq.c...
error: while searching for:
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_tx_uar_remap(struct rte_eth_dev *dev, int fd)
{
--
PROT_WRITE, MAP_FIXED | MAP_SHARED, fd,
txq_ctrl->uar_mmap_offset);
if (ret != addr) {
/* fixed mmap have to return same address */
DRV_LOG(ERR,
"port %u call to mmap failed on UAR"
" for txq %u",
dev->data->port_id, txq_ctrl->idx);
rte_errno = ENXIO;
return -rte_errno;
}
--
/* Assign a UAR lock according to UAR page number */
lock_idx = (txq_ctrl->uar_mmap_offset / page_size) &
MLX5_UAR_PAGE_NUM_MASK;
txq->uar_lock = &priv->uar_lock[lock_idx];
error: patch failed: drivers/net/mlx5/mlx5_txq.c:244
error: drivers/net/mlx5/mlx5_txq.c: patch does not apply
*Repo: dpdk-next-virtio
Checking patch drivers/net/mlx5/mlx5.c...
error: while searching for:
static rte_spinlock_t mlx5_shared_data_lock = RTE_SPINLOCK_INITIALIZER;
/* Process local data for secondary processes. */
static struct mlx5_local_data mlx5_local_data;
/** Driver-specific log messages type. */
int mlx5_logtype;
error: patch failed: drivers/net/mlx5/mlx5.c:132
error: drivers/net/mlx5/mlx5.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5.h...
error: while searching for:
/* Global spinlock for primary and secondary processes. */
int init_done; /* Whether primary has done initialization. */
unsigned int secondary_cnt; /* Number of secondary processes init'd. */
void *uar_base;
/* Reserved UAR address space for TXQ UAR(hw doorbell) mapping. */
struct mlx5_dev_list mem_event_cb_list;
rte_rwlock_t mem_event_rwlock;
};
error: patch failed: drivers/net/mlx5/mlx5.h:97
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxtx.h...
Checking patch drivers/net/mlx5/mlx5_trigger.c...
Checking patch drivers/net/mlx5/mlx5_txq.c...
error: while searching for:
* 0 on success, a negative errno value otherwise and rte_errno is set.
*/
int
mlx5_tx_uar_remap(struct rte_eth_dev *dev, int fd)
{
--
PROT_WRITE, MAP_FIXED | MAP_SHARED, fd,
txq_ctrl->uar_mmap_offset);
if (ret != addr) {
/* fixed mmap have to return same address */
DRV_LOG(ERR,
"port %u call to mmap failed on UAR"
" for txq %u",
dev->data->port_id, txq_ctrl->idx);
rte_errno = ENXIO;
return -rte_errno;
}
--
/* Assign a UAR lock according to UAR page number */
lock_idx = (txq_ctrl->uar_mmap_offset / page_size) &
MLX5_UAR_PAGE_NUM_MASK;
txq->uar_lock = &priv->uar_lock[lock_idx];
error: patch failed: drivers/net/mlx5/mlx5_txq.c:244
error: drivers/net/mlx5/mlx5_txq.c: patch does not apply
DPDK STV team
reply other threads:[~2019-03-25 20:10 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='e75792$6fcba2@orsmga001.jf.intel.com' \
--to=sys_stv@intel.com \
--cc=test-report@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).