From: sys_stv@intel.com
To: test-report@dpdk.org
Subject: [dpdk-test-report] |FAILURE| pw62793[v5, 1/3] ethdev: support API to set max LRO packet size
Date: 12 Nov 2019 02:42:36 -0800 [thread overview]
Message-ID: <ee68f5$8i5uob@orsmga001.jf.intel.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 4429 bytes --]
Test-Label: Intel-compilation
Test-Status: FAILURE
http://dpdk.org/patch/62793
_apply issues_
Submitter: Dekel Peled <dekelp@mellanox.com>
Date: 2019-11-08 16:42:27
Reply_mail: f1184cc375193d244855ec25c2dc057f1ab3d9e0.1573231011.git.dekelp@mellanox.com
DPDK git baseline:
Repo:dpdk-next-net, CommitID: 31aa07759ecd151967b568b1f1aa12b7794217c8
Repo:dpdk, CommitID: 31aa07759ecd151967b568b1f1aa12b7794217c8
*Repo: dpdk-next-net
/* LRO configurations structure. */
struct mlx5_lro_config {
uint32_t supported:1; /* Whether LRO is supported. */
error: patch failed: drivers/net/mlx5/mlx5.h:206
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
error: while searching for:
/* FIXME: we should ask the device for these values. */
info->min_rx_bufsize = 32;
info->max_rx_pktlen = 65536;
/*
* Since we need one CQ per QP, the limit is the minimum number
* between the two values.
error: patch failed: drivers/net/mlx5/mlx5_ethdev.c:606
error: drivers/net/mlx5/mlx5_ethdev.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxq.c...
error: while searching for:
return 0;
}
--
#define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
#define MLX5_MAX_TCP_HDR_OFFSET ((unsigned int)(sizeof(struct rte_ether_hdr) + \
sizeof(struct rte_vlan_hdr) * 2 + \
sizeof(struct rte_ipv6_hdr)))
error: patch failed: drivers/net/mlx5/mlx5_rxq.c:1701
error: drivers/net/mlx5/mlx5_rxq.c: patch does not apply
Checking patch drivers/net/qede/qede_ethdev.c...
Hunk #1 succeeded at 1279 (offset 2 lines).
Checking patch drivers/net/virtio/virtio_ethdev.c...
Checking patch drivers/net/vmxnet3/vmxnet3_ethdev.c...
--
int
rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
const struct rte_eth_conf *dev_conf)
error: patch failed: lib/librte_ethdev/rte_ethdev.c:1136
error: lib/librte_ethdev/rte_ethdev.c: patch does not apply
Checking patch lib/librte_ethdev/rte_ethdev.h...
error: while searching for:
/** The multi-queue packet distribution mode to be used, e.g. RSS. */
enum rte_eth_rx_mq_mode mq_mode;
uint32_t max_rx_pkt_len; /**< Only used if JUMBO_FRAME enabled. */
uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/
/**
* Per-port Rx offloads to be set using DEV_RX_OFFLOAD_* flags.
error: patch failed: lib/librte_ethdev/rte_ethdev.h:395
error: lib/librte_ethdev/rte_ethdev.h: patch does not apply
*Repo: dpdk
/* LRO configurations structure. */
struct mlx5_lro_config {
uint32_t supported:1; /* Whether LRO is supported. */
error: patch failed: drivers/net/mlx5/mlx5.h:206
error: drivers/net/mlx5/mlx5.h: patch does not apply
Checking patch drivers/net/mlx5/mlx5_ethdev.c...
error: while searching for:
/* FIXME: we should ask the device for these values. */
info->min_rx_bufsize = 32;
info->max_rx_pktlen = 65536;
/*
* Since we need one CQ per QP, the limit is the minimum number
* between the two values.
error: patch failed: drivers/net/mlx5/mlx5_ethdev.c:606
error: drivers/net/mlx5/mlx5_ethdev.c: patch does not apply
Checking patch drivers/net/mlx5/mlx5_rxq.c...
error: while searching for:
return 0;
}
--
#define MLX5_MAX_LRO_SIZE (UINT8_MAX * 256u)
#define MLX5_MAX_TCP_HDR_OFFSET ((unsigned int)(sizeof(struct rte_ether_hdr) + \
sizeof(struct rte_vlan_hdr) * 2 + \
sizeof(struct rte_ipv6_hdr)))
error: patch failed: drivers/net/mlx5/mlx5_rxq.c:1701
error: drivers/net/mlx5/mlx5_rxq.c: patch does not apply
Checking patch drivers/net/qede/qede_ethdev.c...
Hunk #1 succeeded at 1279 (offset 2 lines).
Checking patch drivers/net/virtio/virtio_ethdev.c...
Checking patch drivers/net/vmxnet3/vmxnet3_ethdev.c...
--
int
rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_q, uint16_t nb_tx_q,
const struct rte_eth_conf *dev_conf)
error: patch failed: lib/librte_ethdev/rte_ethdev.c:1136
error: lib/librte_ethdev/rte_ethdev.c: patch does not apply
Checking patch lib/librte_ethdev/rte_ethdev.h...
error: while searching for:
/** The multi-queue packet distribution mode to be used, e.g. RSS. */
enum rte_eth_rx_mq_mode mq_mode;
uint32_t max_rx_pkt_len; /**< Only used if JUMBO_FRAME enabled. */
uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/
/**
* Per-port Rx offloads to be set using DEV_RX_OFFLOAD_* flags.
error: patch failed: lib/librte_ethdev/rte_ethdev.h:395
error: lib/librte_ethdev/rte_ethdev.h: patch does not apply
DPDK STV team
reply other threads:[~2019-11-12 10:42 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='ee68f5$8i5uob@orsmga001.jf.intel.com' \
--to=sys_stv@intel.com \
--cc=test-report@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).