* [dpdk-users] l3fwd rte_eth_dev_configure: err=-17
@ 2017-07-30 7:42 czy12345
2017-07-31 5:47 ` Pavel Shirshov
0 siblings, 1 reply; 3+ messages in thread
From: czy12345 @ 2017-07-30 7:42 UTC (permalink / raw)
To: users
Hello experts,
I have successfully ran l2fwd example. But I'm having troubles running the l3fwd example. I find that in l2fwd the nb_tx_queue parameter of function rte_eth_dev_configure is equal to 1, but in l3fwd the parameter is set to the number of lcores. And then when I use more than one lcores, the function fails. Wondering what is related with the problem?
Thanks in advance.
#./l3fwd -l 1 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,1)" --parse-ptype
success
#./l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --parse-ptype
EAL: Detected 8 lcore(s)
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: PCI device 0000:01:00.0 on NUMA socket -1
EAL: probe driver: 8086:10e6 net_e1000_igb
EAL: PCI device 0000:01:00.1 on NUMA socket -1
EAL: probe driver: 8086:10e6 net_e1000_igb
EAL: PCI device 0000:02:00.0 on NUMA socket -1
EAL: probe driver: 8086:10d3 net_e1000_em
EAL: PCI device 0000:03:00.0 on NUMA socket -1
EAL: probe driver: 8086:10d3 net_e1000_em
EAL: PCI device 0000:04:00.0 on NUMA socket -1
EAL: probe driver: 8086:10d3 net_e1000_em
EAL: PCI device 0000:05:00.0 on NUMA socket -1
EAL: probe driver: 8086:10d3 net_e1000_em
EAL: PCI device 0000:06:00.0 on NUMA socket -1
EAL: probe driver: 8086:10d3 net_e1000_em
EAL: PCI device 0000:07:00.0 on NUMA socket -1
EAL: probe driver: 8086:10d3 net_e1000_em
soft parse-ptype is enabled
L3FWD: LPM or EM none selected, default LPM on
Initializing port 0 ... Creating queues: nb_rxq=1 nb_txq=2... EAL: Error - exiting with code: 1
Cause: Cannot configure device: err=-17, port=0
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-users] l3fwd rte_eth_dev_configure: err=-17
2017-07-30 7:42 [dpdk-users] l3fwd rte_eth_dev_configure: err=-17 czy12345
@ 2017-07-31 5:47 ` Pavel Shirshov
2017-07-31 12:55 ` czy12345
0 siblings, 1 reply; 3+ messages in thread
From: Pavel Shirshov @ 2017-07-31 5:47 UTC (permalink / raw)
To: czy12345; +Cc: users
Hello,
What version of DPDK?
What NIC on port 0?
Thanks
On Sun, Jul 30, 2017 at 12:42 AM, <czy12345@mail.ustc.edu.cn> wrote:
> Hello experts,
>
> I have successfully ran l2fwd example. But I'm having troubles running the l3fwd example. I find that in l2fwd the nb_tx_queue parameter of function rte_eth_dev_configure is equal to 1, but in l3fwd the parameter is set to the number of lcores. And then when I use more than one lcores, the function fails. Wondering what is related with the problem?
>
> Thanks in advance.
>
> #./l3fwd -l 1 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,1)" --parse-ptype
> success
>
> #./l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --parse-ptype
> EAL: Detected 8 lcore(s)
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: PCI device 0000:01:00.0 on NUMA socket -1
> EAL: probe driver: 8086:10e6 net_e1000_igb
> EAL: PCI device 0000:01:00.1 on NUMA socket -1
> EAL: probe driver: 8086:10e6 net_e1000_igb
> EAL: PCI device 0000:02:00.0 on NUMA socket -1
> EAL: probe driver: 8086:10d3 net_e1000_em
> EAL: PCI device 0000:03:00.0 on NUMA socket -1
> EAL: probe driver: 8086:10d3 net_e1000_em
> EAL: PCI device 0000:04:00.0 on NUMA socket -1
> EAL: probe driver: 8086:10d3 net_e1000_em
> EAL: PCI device 0000:05:00.0 on NUMA socket -1
> EAL: probe driver: 8086:10d3 net_e1000_em
> EAL: PCI device 0000:06:00.0 on NUMA socket -1
> EAL: probe driver: 8086:10d3 net_e1000_em
> EAL: PCI device 0000:07:00.0 on NUMA socket -1
> EAL: probe driver: 8086:10d3 net_e1000_em
> soft parse-ptype is enabled
> L3FWD: LPM or EM none selected, default LPM on
> Initializing port 0 ... Creating queues: nb_rxq=1 nb_txq=2... EAL: Error - exiting with code: 1
> Cause: Cannot configure device: err=-17, port=0
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-users] l3fwd rte_eth_dev_configure: err=-17
2017-07-31 5:47 ` Pavel Shirshov
@ 2017-07-31 12:55 ` czy12345
0 siblings, 0 replies; 3+ messages in thread
From: czy12345 @ 2017-07-31 12:55 UTC (permalink / raw)
To: Pavel Shirshov; +Cc: users
The DPDK version I used is 17.02.1 . Today I also tried 17.05 and 17.05.1, the result were the same except the return err which was -22.
Network devices using DPDK-compatible driver
============================================
0000:02:00.0 '82574L Gigabit Network Connection 10d3' drv=igb_uio unused=vfio-pci
0000:03:00.0 '82574L Gigabit Network Connection 10d3' drv=igb_uio unused=vfio-pci
Thanks.
At2017-07-31 13:47:41,Pavel Shirshov<pavel.shirshov@gmail.com>wrote:
> Hello,
>
> What version of DPDK?
> What NIC on port 0?
>
> Thanks
>
> On Sun, Jul 30, 2017 at 12:42 AM, <czy12345@mail.ustc.edu.cn> wrote:
> > Hello experts,
> >
> > I have successfully ran l2fwd example. But I'm having troubles running the l3fwd example. I find that in l2fwd the nb_tx_queue parameter of function rte_eth_dev_configure is equal to 1, but in l3fwd the parameter is set to the number of lcores. And then when I use more than one lcores, the function fails. Wondering what is related with the problem?
> >
> > Thanks in advance.
> >
> > #./l3fwd -l 1 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,1)" --parse-ptype
> > success
> >
> > #./l3fwd -l 1,2 -n 4 -- -p 0x3 --config="(0,0,1),(1,0,2)" --parse-ptype
> > EAL: Detected 8 lcore(s)
> > EAL: Probing VFIO support...
> > EAL: VFIO support initialized
> > EAL: PCI device 0000:01:00.0 on NUMA socket -1
> > EAL: probe driver: 8086:10e6 net_e1000_igb
> > EAL: PCI device 0000:01:00.1 on NUMA socket -1
> > EAL: probe driver: 8086:10e6 net_e1000_igb
> > EAL: PCI device 0000:02:00.0 on NUMA socket -1
> > EAL: probe driver: 8086:10d3 net_e1000_em
> > EAL: PCI device 0000:03:00.0 on NUMA socket -1
> > EAL: probe driver: 8086:10d3 net_e1000_em
> > EAL: PCI device 0000:04:00.0 on NUMA socket -1
> > EAL: probe driver: 8086:10d3 net_e1000_em
> > EAL: PCI device 0000:05:00.0 on NUMA socket -1
> > EAL: probe driver: 8086:10d3 net_e1000_em
> > EAL: PCI device 0000:06:00.0 on NUMA socket -1
> > EAL: probe driver: 8086:10d3 net_e1000_em
> > EAL: PCI device 0000:07:00.0 on NUMA socket -1
> > EAL: probe driver: 8086:10d3 net_e1000_em
> > soft parse-ptype is enabled
> > L3FWD: LPM or EM none selected, default LPM on
> > Initializing port 0 ... Creating queues: nb_rxq=1 nb_txq=2... EAL: Error - exiting with code: 1
> > Cause: Cannot configure device: err=-17, port=0
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-07-31 12:55 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-07-30 7:42 [dpdk-users] l3fwd rte_eth_dev_configure: err=-17 czy12345
2017-07-31 5:47 ` Pavel Shirshov
2017-07-31 12:55 ` czy12345
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).