DPDK usage discussions
 help / color / mirror / Atom feed
* [dpdk-users] pmdinfogen issues: cross compilation for ARM fails with older host compiler
@ 2016-11-11 10:34 Hemant Agrawal
  2016-11-11 13:48 ` Jan Viktorin
  2016-11-13 20:59 ` Jerin Jacob
  0 siblings, 2 replies; 12+ messages in thread
From: Hemant Agrawal @ 2016-11-11 10:34 UTC (permalink / raw)
  To: Neil Horman; +Cc: dev, users, Jacob,  Jerin, Jan Viktorin

Hi Neil,
               Pmdinfogen compiles with host compiler. It usages rte_byteorder.h of the target platform.
However, if the host compiler is older than 4.8, it will be an issue during cross compilation for some platforms.
e.g. if we are compiling on x86 host for ARM, x86 host compiler will not understand the arm asm instructions.

/* fix missing __builtin_bswap16 for gcc older then 4.8 */
#if !(__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8))
static inline uint16_t rte_arch_bswap16(uint16_t _x)
{
               register uint16_t x = _x;
               asm volatile ("rev16 %0,%1"
                                    : "=r" (x)
                                    : "r" (x)
                                    );
               return x;
}
#endif

One easy solution is that we add compiler platform check in this code section of rte_byteorder.h
e.g
#if !(defined __arm__ || defined __aarch64__)
static inline uint16_t rte_arch_bswap16(uint16_t _x)
{
               return (_x >> 8) | ((_x << 8) & 0xff00);
}
#else ….

Is there a better way to fix it?

Regards,
Hemant


From: Michael Wildt [mailto:michael.wildt@broadcom.com]
Sent: Wednesday, September 14, 2016 7:18 PM
To: Hemant Agrawal <hemant.agrawal@nxp.com>
Cc: Thomas Monjalon <thomas.monjalon@6wind.com>; users@dpdk.org
Subject: Re: [dpdk-users] Cross compile for ARM64 fails due to librte_vhost and pmdinfogen issues

Hi Hemant,

Thanks for the pointer to the 4.9.3 version. Haven't had issues with 4.9.2 but good to know.

I gave that one a try and that works as well but as with the 5.3 I have to be on a Ubuntu not RHEL6 to make it work.

Thanks,
Michael

On Wed, Sep 14, 2016 at 3:25 AM, Hemant Agrawal <hemant.agrawal@nxp.com<mailto:hemant.agrawal@nxp.com>> wrote:
Hi Michael,
        One of the problem, I found with Linaro gcc 4.9 toolchain for i686 (default one), that it seems to be built with older kernel headers (<3.8). This usages older linux/vhost.h file.

However, we have not observed this issue with x86_64 based toolchain on 64 bit m/c.
 https://releases.linaro.org/14.11/components/toolchain/binaries/aarch64-linux-gnu/

Regards,
Hemant

> -----Original Message-----
> From: users [mailto:users-bounces@dpdk.org<mailto:users-bounces@dpdk.org>] On Behalf Of Michael Wildt
> Sent: Wednesday, September 14, 2016 12:05 AM
> To: Thomas Monjalon <thomas.monjalon@6wind.com<mailto:thomas.monjalon@6wind.com>>
> Cc: users@dpdk.org<mailto:users@dpdk.org>
> Subject: Re: [dpdk-users] Cross compile for ARM64 fails due to librte_vhost and
> pmdinfogen issues
>
> Hi Thomas,
>
> The Linaro gcc 4.9 is correct when it gets to __GNUC_MINOR__, used a test
> application. Its actually 4.9.2.
>
> Tried a newer Linaro tool chain, turned out to be a bit more complicated since
> that does not work on RHEL6, is however a success. With Linaro 5.3 one can
> cross compile dpdk fine with no errors, though the rte_byteorder.h file still
> points to arm's version, but pmdinfogen builds.
>
> Probably should still fix both issues just to keep the base clean.
>
> At least I have a workaround in the interim.
>
> Thanks for the help.
>
> Thanks,
> Michael
>
>
> On Tue, Sep 13, 2016 at 11:07 AM, Thomas Monjalon
> <thomas.monjalon@6wind.com<mailto:thomas.monjalon@6wind.com>
> > wrote:
>
> > 2016-09-13 07:45, Michael Wildt:
> > > Hi Thomas,
> > >
> > > Appreciate the assistance. Please see inline.
> > >
> > >
> > > On Tue, Sep 13, 2016 at 5:03 AM, Thomas Monjalon <
> > thomas.monjalon@6wind.com<mailto:thomas.monjalon@6wind.com>>
> > > wrote:
> > >
> > > > Hi,
> > > >
> > > > 2016-09-12 22:20, Michael Wildt:
> > > > > I'm attempting to cross compile DPDK on an x86 for an ARM64 target.
> > This
> > > > > fails in the following areas, using latest dpdk as of 9/12. When
> > > > compiling
> > > > > natively there are no issues.
> > > >
> > > > Your analysis below seems good.
> > > > Interestingly, I do not see such error (don't know why).
> > > > Please could you share the commands you are using?
> > > >
> > >
> > > Sure can.
> > >
> > > make config T=arm64-armv8a-linuxapp-gcc CROSS=/projects/ccxsw/
> > > toolchains/gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux/
> > bin/aarch64-linux-gnu-
> > > ARCH=arm64
> > >
> > > make T=arm64-armv8a-linuxapp-gcc CROSS=/projects/ccxsw/
> > > toolchains/gcc-linaro-aarch64-linux-gnu-4.9-2014.09_linux/
> > bin/aarch64-linux-gnu-
> > > ARCH=arm64 RTE_KERNELDIR=/projects/kernel
> > >
> > > > > - librte_vhost, fails with:
> > > > >
> > > > > /projects/dpdk_latest/lib/librte_vhost/vhost_user/virtio-
> > > > net-user.c:250:23:
> > > > > error: array subscript is above array bounds [-Werror=array-bounds]
> > > > >    rvq = dev->virtqueue[i * VIRTIO_QNUM + VIRTIO_RXQ];
> > > > [...]
> > > > > - buildtools/pmdinfogen, fails with:
> > > > >
> > > > > == Build buildtools/pmdinfogen
> > > > >   HOSTCC pmdinfogen.o
> > > > > /projects/dpdk_test_wget/dpdk-16.07/build/include/rte_byteorder.h:
> > > > > Assembler messages:
> > > > > /projects/dpdk_test_wget/dpdk-16.07/build/include/rte_
> > byteorder.h:53:
> > > > > Error: no such instruction: `rev16 %bx,%bx'
> > > > [...]
> > > > >   - The issue is due to the rte_byteorder.h file which gets
> > > > >   symlink'ed with the ARM version at the beginning of the build.
> > > > >   The pmdinfogen is always compiled for x86 thus the asm is failing.
> >
> > It is definitely something to fix.
> > In the meantime, you should be able to compile DPDK by using a more
> > recent toolchain. This error is in:
> >
> > /* fix missing __builtin_bswap16 for gcc older then 4.8 */ #if
> > !(__GNUC__ > 4 || (__GNUC__ == 4 && __GNUC_MINOR__ >= 8))
> >
> > I know you are using gcc-4.9 but maybe __GNUC_MINOR__ is wrong in yours.
> >
> >


^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2016-11-18 18:39 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2016-11-11 10:34 [dpdk-users] pmdinfogen issues: cross compilation for ARM fails with older host compiler Hemant Agrawal
2016-11-11 13:48 ` Jan Viktorin
2016-11-11 19:25   ` Neil Horman
2016-11-13 20:59 ` Jerin Jacob
2016-11-14 14:48   ` Neil Horman
2016-11-15  9:34     ` Hemant Agrawal
2016-11-15 14:27       ` Neil Horman
2016-11-15 15:08       ` Neil Horman
2016-11-18 12:03         ` Hemant Agrawal
2016-11-18 13:50           ` Neil Horman
2016-11-18 16:37             ` [dpdk-users] [dpdk-dev] " Bruce Richardson
2016-11-18 18:39               ` Neil Horman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).