DPDK usage discussions
 help / color / mirror / Atom feed
* [dpdk-users] Can Hyper-V NetVSC PMD support IPV6?
@ 2020-09-22 19:06 Liwu Liu
  2020-09-22 20:57 ` Stephen Hemminger
  0 siblings, 1 reply; 3+ messages in thread
From: Liwu Liu @ 2020-09-22 19:06 UTC (permalink / raw)
  To: users

Hi Team,

   It seems NetVSC PMD without SR-IOV slaves cannot receive IPV6 multicast packets for neighbor resolving...evn configured mac address spoofing enabled.

   Is it this way by design?

   Thanks and best regards,


***  Please note that this message and any attachments may contain confidential and proprietary material and information and are intended only for the use of the intended recipient(s). If you are not the intended recipient, you are hereby notified that any review, use, disclosure, dissemination, distribution or copying of this message and any attachments is strictly prohibited. If you have received this email in error, please immediately notify the sender and destroy this e-mail and any attachments and all copies, whether electronic or printed. Please also note that any views, opinions, conclusions or commitments expressed in this message are those of the individual sender and do not necessarily reflect the views of Fortinet, Inc., its affiliates, and emails are not binding on Fortinet and only a writing manually signed by Fortinet's General Counsel can be a binding commitment of Fortinet to Fortinet's customers or partners. Thank you. ***

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2020-09-22 21:02 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-09-22 19:06 [dpdk-users] Can Hyper-V NetVSC PMD support IPV6? Liwu Liu
2020-09-22 20:57 ` Stephen Hemminger
2020-09-22 21:01   ` Liwu Liu

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ https://inbox.dpdk.org/users \
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git