DPDK usage discussions
 help / color / mirror / Atom feed
From: vdf  <thomas200813@163.com>
To: users@dpdk.org
Subject: [dpdk-users] ixgbevf_dev_rx_init(): Set max packet length to 9600 failed.
Date: Thu, 8 Apr 2021 00:06:06 +0800 (CST)
Message-ID: <20d6d0ae.748c.178ad15718a.Coremail.thomas200813@163.com> (raw)

Hi all,

I have already set up 2 VFs on enslf1 NIC. The DPDK version is dpdk-stable-19.11.7. There is one issue related to max packet length to 9600.
I tried both igb_uio and VFIO_PCI as driver. Could you kindly guide me how to fix this issue? 

#ens1f1 setting
5: ens1f1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
    link/ether f8:f2:1e:13:e0:9d brd ff:ff:ff:ff:ff:ff
    vf 0 MAC 00:11:22:33:44:55, vlan 2, spoof checking on, link-state auto, trust off, query_rss off
    vf 1 MAC 00:11:22:33:44:55, vlan 1, spoof checking on, link-state auto, trust off, query_rss off
#ens1f1 profile
 ethtool -i ens1f1
driver: ixgbe
version: 5.1.0-k
firmware-version: 0x00015e0b
bus-info: 0000:03:00.1
supports-statistics: yes
supports-test: yes
supports-eeprom-access: yes
supports-register-dump: yes
supports-priv-flags: yes

#issue I met
EAL: Selected IOVA mode 'PA'

EAL: Probing VFIO support...

EAL: VFIO support initialized

EAL: PCI device 0000:03:10.1 on NUMA socket 0

EAL:   probe driver: 8086:10ed net_ixgbe_vf

EAL:   using IOMMU type 1 (Type 1)

initializing port 0 for TX, drv=net_ixgbe_vf

Port 0 MAC: 00 11 22 33 44 55

Port 0: nb_rxd 4096 nb_txd 4096

ixgbevf_dev_rx_init(): Set max packet length to 9600 failed.

ixgbevf_dev_start(): Unable to initialize RX hardware (-22)



             reply	other threads:[~2021-04-07 16:06 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-04-07 16:06 vdf [this message]
2021-04-08 14:46 ` vdf
2021-04-09 15:09   ` vdf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20d6d0ae.748c.178ad15718a.Coremail.thomas200813@163.com \
    --to=thomas200813@163.com \
    --cc=users@dpdk.org \


* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ https://inbox.dpdk.org/users \
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:

AGPL code for this site: git clone https://public-inbox.org/public-inbox.git