* Re: [dpdk-users] Can not forward the message in DPDK [not found] <657316633.418770.1495792167450.ref@mail.yahoo.com> @ 2017-05-26 9:49 ` Manoj Mallawaarachchi 2017-06-07 13:34 ` LOAN TON 0 siblings, 1 reply; 6+ messages in thread From: Manoj Mallawaarachchi @ 2017-05-26 9:49 UTC (permalink / raw) To: users, LOAN TON Hi Loan, Thanks for the message to group and sharing the information. I also doing small scale project similar to this using DPDK forwarder app and as below scenario. Client PC ----> DPDK forwarder ----> Internet All connect via home router. I face same issue with client forwarding to DPDK app and to INTERNET and back. Still my objective not work, however I found below discussion will help to your scenario also. http://dpdk.org/ml/archives/dev/2013-June/000237.html May be you need to integrate user space TCP/IP stack like ANS. https://github.com/ansyun/dpdk-ans I'm also exploring possibilities to my requirement discussed below: http://www.dpdk.org/ml/archives/users/2017-May/001922.html Hope my comments useful to get some idea. Thank you, Manoj M -------------------------------------------- On Wed, 5/24/17, LOAN TON <tont@usi.ch> wrote: Subject: [dpdk-users] Can not forward the message in DPDK To: users@dpdk.org Date: Wednesday, May 24, 2017, 7:50 PM Hi all, I am a newbie with DPDK. I am doing a small project as following. I have three components such as client (one or many), one transporter and one server. The transporter and server are in DPDK. I use switch to connect three components together and add rule to forward the message between them. The message passing from client and transfer to transporter and then to server. The server receives the message , opens it and reads some information and responds to client and repeats again. One client sends a message to transporter and server. At the transporter, it only increases the id of message and then pass the message to the server. Only when receiving message from server, client just sends another one message. Besides, after one second, the client have not received the message from the server. It will send a new message to the transporter and server. The life cycle runs forever until i terminate the application. Model: Client -> Transporter (DPDK) -> Server (DPDK) My problem here is the client (for example 30 clients) sends a message to transporter. The transporter forwards message to server. But the server does not receive any message from the transporter. I checked some information in my transporter, the server and also the switch device (port 30 is belong to the transporter, port 28 is belong to the server). I discovered that when the switch showed err = 2, over =2 in the port 30 of the transporter, the server have not received any message from the transporter (just my thinking, not sure). (You can see some below photos) Or I guessed that I did something wrong in the transporter’s code. Besides, I also run some experiments with different the amount of clients in 15 seconds, sometimes the system works, sometimes not. Have anyone met such case? Please help me to figure out where the error come from. I would be grateful for any help I attach some photos of transporter, server, switch info and the transporter's code because maybe I was doing wrong about txbuffer or rte_mbuf. Best Regards, Loan Ton Here are photo links Transporter with 30 clients: http://imgur.com/a/dQ5ss <http://imgur.com/a/dQ5ss> Server with 30 clients: http://imgur.com/a/WkhBR <http://imgur.com/a/WkhBR> Switch with 30 clients: http://imgur.com/a/MEPPA <http://imgur.com/a/MEPPA> I tested the case with 15 clients, one transporter, one server. Transporter with 15 clients: http://imgur.com/a/VXHZb <http://imgur.com/a/VXHZb> Server with 15 clients: http://imgur.com/a/ed4Pj <http://imgur.com/a/ed4Pj> Transporter’s code: http://codepad.org/I4eDSll3 <http://codepad.org/I4eDSll3> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-users] Can not forward the message in DPDK 2017-05-26 9:49 ` [dpdk-users] Can not forward the message in DPDK Manoj Mallawaarachchi @ 2017-06-07 13:34 ` LOAN TON 2017-06-07 16:27 ` Manoj Mallawaarachchi 0 siblings, 1 reply; 6+ messages in thread From: LOAN TON @ 2017-06-07 13:34 UTC (permalink / raw) To: Manoj Mallawaarachchi; +Cc: users Hi Manoj M, Have you solved your problem? I still stick on my case. Loan Ton > On 26 May 2017, at 11:49 AM, Manoj Mallawaarachchi <manoj_ws@yahoo.com> wrote: > > Hi Loan, > > Thanks for the message to group and sharing the information. I also doing small scale project similar to this using DPDK forwarder app and as below scenario. > > Client PC ----> DPDK forwarder ----> Internet > > All connect via home router. I face same issue with client forwarding to DPDK app and to INTERNET and back. Still my objective not work, however I found below discussion will help to your scenario also. > > http://dpdk.org/ml/archives/dev/2013-June/000237.html > > May be you need to integrate user space TCP/IP stack like ANS. > > https://github.com/ansyun/dpdk-ans > > I'm also exploring possibilities to my requirement discussed below: > > http://www.dpdk.org/ml/archives/users/2017-May/001922.html > > Hope my comments useful to get some idea. > > Thank you, > Manoj M > -------------------------------------------- > On Wed, 5/24/17, LOAN TON <tont@usi.ch> wrote: > > Subject: [dpdk-users] Can not forward the message in DPDK > To: users@dpdk.org > Date: Wednesday, May 24, 2017, 7:50 PM > > Hi all, > > I am a newbie with DPDK. I am doing a > small project as following. > > I have three components such as client > (one or many), one transporter and one server. The > transporter and server are in DPDK. I use switch to > connect three components together and add rule to > forward the message between them. The message passing from > client and transfer to transporter and then to server. The > server receives the message , opens it and reads some > information and responds to client and repeats again. One > client sends a message to transporter and server. At the > transporter, it only increases the id of message and then > pass the message to the server. Only when receiving message > from server, client just sends another one message. Besides, > after one second, the client have not received the message > from the server. It will send a new message to the > transporter and server. The life cycle runs forever until i > terminate the application. > > Model: Client -> > Transporter (DPDK) -> Server (DPDK) > > My problem here is the client (for > example 30 clients) sends a message to transporter. The > transporter forwards message to server. But the server does > not receive any message from the transporter. > I checked some information in my > transporter, the server and also the switch device (port 30 > is belong to the transporter, port 28 is belong to the > server). I discovered that when the switch showed err = 2, > over =2 in the port 30 of the transporter, the server have > not received any message from the transporter (just my > thinking, not sure). (You can see some below photos) > Or I guessed that I did something wrong in the > transporter’s code. > Besides, I also run some experiments > with different the amount of clients in 15 seconds, > sometimes the system works, sometimes not. > > Have anyone met such case? Please help > me to figure out where the error come from. I would be > grateful for any help > > I attach some photos of transporter, > server, switch info and the transporter's code because > maybe I was doing wrong about txbuffer or rte_mbuf. > > Best Regards, > Loan Ton > > Here are photo links > Transporter with 30 clients: http://imgur.com/a/dQ5ss <http://imgur.com/a/dQ5ss> > Server with 30 clients: http://imgur.com/a/WkhBR <http://imgur.com/a/WkhBR> > Switch with 30 clients: http://imgur.com/a/MEPPA <http://imgur.com/a/MEPPA> > > I tested the case with 15 clients, one > transporter, one server. > Transporter with 15 clients: http://imgur.com/a/VXHZb <http://imgur.com/a/VXHZb> > Server with 15 clients: http://imgur.com/a/ed4Pj <http://imgur.com/a/ed4Pj> > > Transporter’s code: http://codepad.org/I4eDSll3 <http://codepad.org/I4eDSll3> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-users] Can not forward the message in DPDK 2017-06-07 13:34 ` LOAN TON @ 2017-06-07 16:27 ` Manoj Mallawaarachchi 2017-06-07 16:31 ` LOAN TON 0 siblings, 1 reply; 6+ messages in thread From: Manoj Mallawaarachchi @ 2017-06-07 16:27 UTC (permalink / raw) To: LOAN TON; +Cc: users blockquote, div.yahoo_quoted { margin-left: 0 !important; border-left:1px #715FFA solid !important; padding-left:1ex !important; background-color:white !important; } Hi Loan, Yes, I manage my work with basic forwarder setup as bump in the wire. Now my forwarding working from pc to net and back. Working on multi core support and RSS now. If it help I can discribe more detail to you. Thank you,Manoj M Sent from Yahoo Mail for iPad On Wednesday, June 7, 2017, 5:34 pm, LOAN TON <tont@usi.ch> wrote: Hi Manoj M, Have you solved your problem? I still stick on my case. Loan Ton > On 26 May 2017, at 11:49 AM, Manoj Mallawaarachchi <manoj_ws@yahoo.com> wrote: > > Hi Loan, > > Thanks for the message to group and sharing the information. I also doing small scale project similar to this using DPDK forwarder app and as below scenario. > > Client PC ----> DPDK forwarder ----> Internet > > All connect via home router. I face same issue with client forwarding to DPDK app and to INTERNET and back. Still my objective not work, however I found below discussion will help to your scenario also. > > http://dpdk.org/ml/archives/dev/2013-June/000237.html > > May be you need to integrate user space TCP/IP stack like ANS. > > https://github.com/ansyun/dpdk-ans > > I'm also exploring possibilities to my requirement discussed below: > > http://www.dpdk.org/ml/archives/users/2017-May/001922.html > > Hope my comments useful to get some idea. > > Thank you, > Manoj M > -------------------------------------------- > On Wed, 5/24/17, LOAN TON <tont@usi.ch> wrote: > > Subject: [dpdk-users] Can not forward the message in DPDK > To: users@dpdk.org > Date: Wednesday, May 24, 2017, 7:50 PM > > Hi all, > > I am a newbie with DPDK. I am doing a > small project as following. > > I have three components such as client > (one or many), one transporter and one server. The > transporter and server are in DPDK. I use switch to > connect three components together and add rule to > forward the message between them. The message passing from > client and transfer to transporter and then to server. The > server receives the message , opens it and reads some > information and responds to client and repeats again. One > client sends a message to transporter and server. At the > transporter, it only increases the id of message and then > pass the message to the server. Only when receiving message > from server, client just sends another one message. Besides, > after one second, the client have not received the message > from the server. It will send a new message to the > transporter and server. The life cycle runs forever until i > terminate the application. > > Model: Client -> > Transporter (DPDK) -> Server (DPDK) > > My problem here is the client (for > example 30 clients) sends a message to transporter. The > transporter forwards message to server. But the server does > not receive any message from the transporter. > I checked some information in my > transporter, the server and also the switch device (port 30 > is belong to the transporter, port 28 is belong to the > server). I discovered that when the switch showed err = 2, > over =2 in the port 30 of the transporter, the server have > not received any message from the transporter (just my > thinking, not sure). (You can see some below photos) > Or I guessed that I did something wrong in the > transporter’s code. > Besides, I also run some experiments > with different the amount of clients in 15 seconds, > sometimes the system works, sometimes not. > > Have anyone met such case? Please help > me to figure out where the error come from. I would be > grateful for any help > > I attach some photos of transporter, > server, switch info and the transporter's code because > maybe I was doing wrong about txbuffer or rte_mbuf. > > Best Regards, > Loan Ton > > Here are photo links > Transporter with 30 clients: http://imgur.com/a/dQ5ss <http://imgur.com/a/dQ5ss> > Server with 30 clients: http://imgur.com/a/WkhBR <http://imgur.com/a/WkhBR> > Switch with 30 clients: http://imgur.com/a/MEPPA <http://imgur.com/a/MEPPA> > > I tested the case with 15 clients, one > transporter, one server. > Transporter with 15 clients: http://imgur.com/a/VXHZb <http://imgur.com/a/VXHZb> > Server with 15 clients: http://imgur.com/a/ed4Pj <http://imgur.com/a/ed4Pj> > > Transporter’s code: http://codepad.org/I4eDSll3 <http://codepad.org/I4eDSll3> ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-users] Can not forward the message in DPDK 2017-06-07 16:27 ` Manoj Mallawaarachchi @ 2017-06-07 16:31 ` LOAN TON 0 siblings, 0 replies; 6+ messages in thread From: LOAN TON @ 2017-06-07 16:31 UTC (permalink / raw) To: Manoj Mallawaarachchi; +Cc: users Hi Manoj, Yes, please describe them to me. Thank you Best Regards, Loan Ton > On 7 Jun 2017, at 6:27 PM, Manoj Mallawaarachchi <manoj_ws@yahoo.com> wrote: > > Hi Loan, > > Yes, I manage my work with basic forwarder setup as bump in the wire. Now my forwarding working from pc to net and back. Working on multi core support and RSS now. > > If it help I can describe more detail to you. > > Thank you, > Manoj M > > Sent from Yahoo Mail for iPad <https://yho.com/footer0> > > On Wednesday, June 7, 2017, 5:34 pm, LOAN TON <tont@usi.ch> wrote: > > Hi Manoj M, > > Have you solved your problem? I still stick on my case. > > Loan Ton > > > On 26 May 2017, at 11:49 AM, Manoj Mallawaarachchi <manoj_ws@yahoo.com <mailto:manoj_ws@yahoo.com>> wrote: > > > > Hi Loan, > > > > Thanks for the message to group and sharing the information. I also doing small scale project similar to this using DPDK forwarder app and as below scenario. > > > > Client PC ----> DPDK forwarder ----> Internet > > > > All connect via home router. I face same issue with client forwarding to DPDK app and to INTERNET and back. Still my objective not work, however I found below discussion will help to your scenario also. > > > > <http://dpdk.org/ml/archives/dev/2013-June/000237.html>http://dpdk.org/ml/archives/dev/2013-June/000237.html <http://dpdk.org/ml/archives/dev/2013-June/000237.html> > > > > May be you need to integrate user space TCP/IP stack like ANS. > > > > <https://github.com/ansyun/dpdk-ans>https://github.com/ansyun/dpdk-ans <https://github.com/ansyun/dpdk-ans> > > > > I'm also exploring possibilities to my requirement discussed below: > > > > <http://www.dpdk.org/ml/archives/users/2017-May/001922.html>http://www.dpdk.org/ml/archives/users/2017-May/001922.html <http://www.dpdk.org/ml/archives/users/2017-May/001922.html> > > > > Hope my comments useful to get some idea. > > > > Thank you, > > Manoj M > > -------------------------------------------- > > On Wed, 5/24/17, LOAN TON <tont@usi.ch <mailto:tont@usi.ch>> wrote: > > > > Subject: [dpdk-users] Can not forward the message in DPDK > > To: users@dpdk.org <mailto:users@dpdk.org> > > Date: Wednesday, May 24, 2017, 7:50 PM > > > > Hi all, > > > > I am a newbie with DPDK. I am doing a > > small project as following. > > > > I have three components such as client > > (one or many), one transporter and one server. The > > transporter and server are in DPDK. I use switch to > > connect three components together and add rule to > > forward the message between them. The message passing from > > client and transfer to transporter and then to server. The > > server receives the message , opens it and reads some > > information and responds to client and repeats again. One > > client sends a message to transporter and server. At the > > transporter, it only increases the id of message and then > > pass the message to the server. Only when receiving message > > from server, client just sends another one message. Besides, > > after one second, the client have not received the message > > from the server. It will send a new message to the > > transporter and server. The life cycle runs forever until i > > terminate the application. > > > > Model: Client -> > > Transporter (DPDK) -> Server (DPDK) > > > > My problem here is the client (for > > example 30 clients) sends a message to transporter. The > > transporter forwards message to server. But the server does > > not receive any message from the transporter. > > I checked some information in my > > transporter, the server and also the switch device (port 30 > > is belong to the transporter, port 28 is belong to the > > server). I discovered that when the switch showed err = 2, > > over =2 in the port 30 of the transporter, the server have > > not received any message from the transporter (just my > > thinking, not sure). (You can see some below photos) > > Or I guessed that I did something wrong in the > > transporter’s code. > > Besides, I also run some experiments > > with different the amount of clients in 15 seconds, > > sometimes the system works, sometimes not. > > > > Have anyone met such case? Please help > > me to figure out where the error come from. I would be > > grateful for any help > > > > I attach some photos of transporter, > > server, switch info and the transporter's code because > > maybe I was doing wrong about txbuffer or rte_mbuf. > > > > Best Regards, > > Loan Ton > > > > Here are photo links > > Transporter with 30 clients: <http://imgur.com/a/dQ5ss>http://imgur.com/a/dQ5ss <http://imgur.com/a/dQ5ss>< <http://imgur.com/a/dQ5ss>http://imgur.com/a/dQ5ss <http://imgur.com/a/dQ5ss>> > > Server with 30 clients: <http://imgur.com/a/WkhBR>http://imgur.com/a/WkhBR <http://imgur.com/a/WkhBR>< <http://imgur.com/a/WkhBR>http://imgur.com/a/WkhBR <http://imgur.com/a/WkhBR>> > > Switch with 30 clients: <http://imgur.com/a/MEPPA>http://imgur.com/a/MEPPA <http://imgur.com/a/MEPPA>< <http://imgur.com/a/MEPPA>http://imgur.com/a/MEPPA <http://imgur.com/a/MEPPA>> > > > > I tested the case with 15 clients, one > > transporter, one server. > > Transporter with 15 clients: <http://imgur.com/a/VXHZb>http://imgur.com/a/VXHZb <http://imgur.com/a/VXHZb>< <http://imgur.com/a/VXHZb>http://imgur.com/a/VXHZb <http://imgur.com/a/VXHZb>> > > Server with 15 clients: <http://imgur.com/a/ed4Pj>http://imgur.com/a/ed4Pj <http://imgur.com/a/ed4Pj>< <http://imgur.com/a/ed4Pj>http://imgur.com/a/ed4Pj <http://imgur.com/a/ed4Pj>> > > > > Transporter’s code: <http://codepad.org/I4eDSll3>http://codepad.org/I4eDSll3 <http://codepad.org/I4eDSll3>< <http://codepad.org/I4eDSll3>http://codepad.org/I4eDSll3 <http://codepad.org/I4eDSll3>> ^ permalink raw reply [flat|nested] 6+ messages in thread
[parent not found: <938161962.5244930.1496853960239.ref@mail.yahoo.com>]
* Re: [dpdk-users] Can not forward the message in DPDK [not found] <938161962.5244930.1496853960239.ref@mail.yahoo.com> @ 2017-06-07 16:46 ` Manoj Mallawaarachchi 0 siblings, 0 replies; 6+ messages in thread From: Manoj Mallawaarachchi @ 2017-06-07 16:46 UTC (permalink / raw) To: Manoj Mallawaarachchi, LOAN TON; +Cc: users Hi Loan, Please find the attached diagram, It's explain the physical connectivity. Hope this help. DPDK box run the basic forwarder app with physical NIC having 1 Gbps x2 slots. So connectivity between INTERNET and Pc's transparent to PC & INTERNET. Thank you, Manoj M -------------------------------------------- On Wed, 6/7/17, LOAN TON <tont@usi.ch> wrote: Subject: Re: [dpdk-users] Can not forward the message in DPDK To: "Manoj Mallawaarachchi" <manoj_ws@yahoo.com> Cc: users@dpdk.org Date: Wednesday, June 7, 2017, 8:31 PM Hi Manoj, Yes, please describe them to me.Thank you Best Regards,Loan Ton On 7 Jun 2017, at 6:27 PM, Manoj Mallawaarachchi <manoj_ws@yahoo.com> wrote: Hi Loan, Yes, I manage my work with basic forwarder setup as bump in the wire. Now my forwarding working from pc to net and back. Working on multi core support and RSS now. If it help I can describe more detail to you. Thank you,Manoj M Sent from Yahoo Mail for iPad On Wednesday, June 7, 2017, 5:34 pm, LOAN TON <tont@usi.ch> wrote:Hi Manoj M, Have you solved your problem? I still stick on my case. Loan Ton > On 26 May 2017, at 11:49 AM, Manoj Mallawaarachchi <manoj_ws@yahoo.com> wrote: > > Hi Loan, > > Thanks for the message to group and sharing the information. I also doing small scale project similar to this using DPDK forwarder app and as below scenario. > > Client PC ----> DPDK forwarder ----> Internet > > All connect via home router. I face same issue with client forwarding to DPDK app and to INTERNET and back. Still my objective not work, however I found below discussion will help to your scenario also. > > http://dpdk.org/ml/archives/dev/2013-June/000237.html > > May be you need to integrate user space TCP/IP stack like ANS. > > https://github.com/ansyun/dpdk-ans > > I'm also exploring possibilities to my requirement discussed below: > > http://www.dpdk.org/ml/archives/users/2017-May/001922.html > > Hope my comments useful to get some idea. > > Thank you, > Manoj M > -------------------------------------------- > On Wed, 5/24/17, LOAN TON <tont@usi.ch> wrote: > > Subject: [dpdk-users] Can not forward the message in DPDK > To: users@dpdk.org > Date: Wednesday, May 24, 2017, 7:50 PM > > Hi all, > > I am a newbie with DPDK. I am doing a > small project as following. > > I have three components such as client > (one or many), one transporter and one server. The > transporter and server are in DPDK. I use switch to > connect three components together and add rule to > forward the message between them. The message passing from > client and transfer to transporter and then to server. The > server receives the message , opens it and reads some > information and responds to client and repeats again. One > client sends a message to transporter and server. At the > transporter, it only increases the id of message and then > pass the message to the server. Only when receiving message > from server, client just sends another one message. Besides, > after one second, the client have not received the message > from the server. It will send a new message to the > transporter and server. The life cycle runs forever until i > terminate the application. > > Model: Client -> > Transporter (DPDK) -> Server (DPDK) > > My problem here is the client (for > example 30 clients) sends a message to transporter. The > transporter forwards message to server. But the server does > not receive any message from the transporter. > I checked some information in my > transporter, the server and also the switch device (port 30 > is belong to the transporter, port 28 is belong to the > server). I discovered that when the switch showed err = 2, > over =2 in the port 30 of the transporter, the server have > not received any message from the transporter (just my > thinking, not sure). (You can see some below photos) > Or I guessed that I did something wrong in the > transporter’s code. > Besides, I also run some experiments > with different the amount of clients in 15 seconds, > sometimes the system works, sometimes not. > > Have anyone met such case? Please help > me to figure out where the error come from. I would be > grateful for any help > > I attach some photos of transporter, > server, switch info and the transporter's code because > maybe I was doing wrong about txbuffer or rte_mbuf. > > Best Regards, > Loan Ton > > Here are photo links > Transporter with 30 clients: http://imgur.com/a/dQ5ss <http://imgur.com/a/dQ5ss> > Server with 30 clients: http://imgur.com/a/WkhBR <http://imgur.com/a/WkhBR> > Switch with 30 clients: http://imgur.com/a/MEPPA <http://imgur.com/a/MEPPA> > > I tested the case with 15 clients, one > transporter, one server. > Transporter with 15 clients: http://imgur.com/a/VXHZb <http://imgur.com/a/VXHZb> > Server with 15 clients: http://imgur.com/a/ed4Pj <http://imgur.com/a/ed4Pj> > > Transporter’s code: http://codepad.org/I4eDSll3 <http://codepad.org/I4eDSll3> -------------- next part -------------- A non-text attachment was scrubbed... Name: dpdk_internet.pdf Type: application/pdf Size: 82585 bytes Desc: not available URL: <http://dpdk.org/ml/archives/users/attachments/20170607/7e49a853/attachment.pdf> ^ permalink raw reply [flat|nested] 6+ messages in thread
* [dpdk-users] Can not forward the message in DPDK @ 2017-05-24 15:50 LOAN TON 0 siblings, 0 replies; 6+ messages in thread From: LOAN TON @ 2017-05-24 15:50 UTC (permalink / raw) To: users Hi all, I am a newbie with DPDK. I am doing a small project as following. I have three components such as client (one or many), one transporter and one server. The transporter and server are in DPDK. I use switch to connect three components together and add rule to forward the message between them. The message passing from client and transfer to transporter and then to server. The server receives the message , opens it and reads some information and responds to client and repeats again. One client sends a message to transporter and server. At the transporter, it only increases the id of message and then pass the message to the server. Only when receiving message from server, client just sends another one message. Besides, after one second, the client have not received the message from the server. It will send a new message to the transporter and server. The life cycle runs forever until i terminate the application. Model: Client -> Transporter (DPDK) -> Server (DPDK) My problem here is the client (for example 30 clients) sends a message to transporter. The transporter forwards message to server. But the server does not receive any message from the transporter. I checked some information in my transporter, the server and also the switch device (port 30 is belong to the transporter, port 28 is belong to the server). I discovered that when the switch showed err = 2, over =2 in the port 30 of the transporter, the server have not received any message from the transporter (just my thinking, not sure). (You can see some below photos) Or I guessed that I did something wrong in the transporter’s code. Besides, I also run some experiments with different the amount of clients in 15 seconds, sometimes the system works, sometimes not. Have anyone met such case? Please help me to figure out where the error come from. I would be grateful for any help I attach some photos of transporter, server, switch info and the transporter's code because maybe I was doing wrong about txbuffer or rte_mbuf. Best Regards, Loan Ton Here are photo links Transporter with 30 clients: http://imgur.com/a/dQ5ss <http://imgur.com/a/dQ5ss> Server with 30 clients: http://imgur.com/a/WkhBR <http://imgur.com/a/WkhBR> Switch with 30 clients: http://imgur.com/a/MEPPA <http://imgur.com/a/MEPPA> I tested the case with 15 clients, one transporter, one server. Transporter with 15 clients: http://imgur.com/a/VXHZb <http://imgur.com/a/VXHZb> Server with 15 clients: http://imgur.com/a/ed4Pj <http://imgur.com/a/ed4Pj> Transporter’s code: http://codepad.org/I4eDSll3 <http://codepad.org/I4eDSll3> ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2017-06-07 16:46 UTC | newest] Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <657316633.418770.1495792167450.ref@mail.yahoo.com> 2017-05-26 9:49 ` [dpdk-users] Can not forward the message in DPDK Manoj Mallawaarachchi 2017-06-07 13:34 ` LOAN TON 2017-06-07 16:27 ` Manoj Mallawaarachchi 2017-06-07 16:31 ` LOAN TON [not found] <938161962.5244930.1496853960239.ref@mail.yahoo.com> 2017-06-07 16:46 ` Manoj Mallawaarachchi 2017-05-24 15:50 LOAN TON
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).