ESXi 6.5

Guest OS: Ubuntu 20.04

Network Driver: VMXNET3

DPDK: 21.11.1

There are three network adapters, one for ssh, two for DPDK.

## set kernel parameters
echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages
echo 1 > /sys/module/vfio/parameters/enable_unsafe_noiommu_mode

## bind dev

root@dpdk01:~/dpdk-stable-21.11.1/usertools# ./dpdk-devbind.py --status-dev net
Network devices using DPDK-compatible driver
============================================
0000:0b:00.0 'VMXNET3 Ethernet Controller 07b0' drv=vfio-pci unused=vmxnet3
0000:13:00.0 'VMXNET3 Ethernet Controller 07b0' drv=vfio-pci unused=vmxnet3
Network devices using kernel driver
===================================
0000:03:00.0 'VMXNET3 Ethernet Controller 07b0' if=eth0 drv=vmxnet3 unused=vfio-pci *Active*

# testpmd segment fault

root@dpdk01:~/dpdk-stable-21.11.1/build/app# ./dpdk-testpmd -l 0-3 -n 4
EAL: Detected CPU lcores: 4
EAL: Detected NUMA nodes: 1
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available 1048576 kB hugepages reported
EAL: VFIO support initialized
EAL: Using IOMMU type 8 (No-IOMMU)
EAL: Ignore mapping IO port bar(3)
EAL: Probe PCI driver: net_vmxnet3 (15ad:7b0) device: 0000:0b:00.0 (socket 0)
EAL: Ignore mapping IO port bar(3)
EAL: Probe PCI driver: net_vmxnet3 (15ad:7b0) device: 0000:13:00.0 (socket 0)
testpmd: create a new mbuf pool <mb_pool_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 00:0C:29:AE:03:68
Configuring Port 1 (socket 0)
Segmentation fault (core dumped)

# gdb info

Thread 1 "dpdk-testpmd" received signal SIGSEGV, Segmentation fault.
0x0000555555930c0f in vmxnet3_write_mac.isra ()
(gdb) where
#0  0x0000555555930c0f in vmxnet3_write_mac.isra ()
#1  0x0000555555931e5c in vmxnet3_dev_start ()
#2  0x000055555624c6cc in rte_eth_dev_start ()
#3  0x00005555560e13d0 in start_port ()
#4  0x000055555597d98b in main ()