DPDK usage discussions
 help / color / mirror / Atom feed
* [dpdk-users] All links down with Chelsio T6 NICs
@ 2021-04-09 17:24 Danushka Menikkumbura
  2021-04-10  8:15 ` Thomas Monjalon
  0 siblings, 1 reply; 4+ messages in thread
From: Danushka Menikkumbura @ 2021-04-09 17:24 UTC (permalink / raw)
  To: users

Hello,

When I run testpmd on a system with 2 two-port Chelsio T6 NICs, the link
status is down for all four ports. I use igb_uio as the kernel driver.
Below is my testpmd commandline and the startup log.

sudo ./build/app/dpdk-testpmd -l 0,1,2,5 -b 81:00.0 -- -i

EAL: Detected 20 lcore(s)
EAL: Detected 4 NUMA nodes
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'PA'
EAL: No available 1048576 kB hugepages reported
EAL: Probing VFIO support...
EAL: VFIO support initialized
EAL: Probe PCI driver: net_cxgbe (1425:6408) device: 0000:05:00.4 (socket 0)
rte_cxgbe_pmd: Maskless filter support disabled. Continuing
EAL: Probe PCI driver: net_cxgbe (1425:6408) device: 0000:0b:00.4 (socket 0)
rte_cxgbe_pmd: Maskless filter support disabled. Continuing
Interactive-mode selected
testpmd: create a new mbuf pool <mb_pool_0>: n=171456, size=2176, socket=0
testpmd: preferred mempool ops selected: ring_mp_mc
testpmd: create a new mbuf pool <mb_pool_2>: n=171456, size=2176, socket=2
testpmd: preferred mempool ops selected: ring_mp_mc
Configuring Port 0 (socket 0)
Port 0: 00:07:43:5D:4E:60
Configuring Port 1 (socket 0)
Port 1: 00:07:43:5D:4E:68
Configuring Port 2 (socket 0)
Port 2: 00:07:43:5D:51:00
Configuring Port 3 (socket 0)
Port 3: 00:07:43:5D:51:08
Checking link statuses...
Done
testpmd>

Your help is very much appreciated.

Thanks,
Danushka

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2021-04-10 13:18 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-09 17:24 [dpdk-users] All links down with Chelsio T6 NICs Danushka Menikkumbura
2021-04-10  8:15 ` Thomas Monjalon
2021-04-10 11:47   ` Danushka Menikkumbura
2021-04-10 13:17     ` Rahul Lakkireddy

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ https://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git