Re: [dpdk-users] VIRTIO for containers

[王志克 <wangzhike@jd.com>]

Hi  Jianfeng,

It is proven that there is SW bug on DPDK17.05.2, which leads to this issue. I will submit patch later this week.

Now I can succeed to configure the container.  I did some simple test with netperf (one server and one client in different hosts), and some result comparing container with kernel OVS:
1. From netperf sender view, the tx thoughput increase about 100%. On sender, there is almost no packet loss. That means kernel vhost thread timely transfer data from kernel to userspace OVS+DPDK.
2. From netperf recvier view, the rx thoughput increase about 50%. On recviever, the packet loss happens on virtiouserx. There is no packet loss on tap port. That means kernel vhost thread is slow to transfer data from userspace OVS+DPDK to kernel.

May I ask some question? Thanks.

1) Did you have some benchmark data for performance?
2) Is there any explanation why the kernel vhost thread speed is different for two direction (from kernel to user, and vice versa)?

Welcome feedback if someone has such data.

Br,
Wang Zhike
From: 王志克
Sent: Tuesday, October 24, 2017 11:16 AM
To: 'Tan, Jianfeng'; avi.cohen@huawei.com; users@dpdk.org
Subject: RE: VIRTIO for containers

Thanks Jianfeng.

I finally realized that I used DPDK16.11 which does NOT support this function.

Then I use latest DPDK (17.05.2) and OVS (2.8.1), but still does not work.

ovs-vsctl add-port br0 virtiouser0 -- set Interface virtiouser0 type=dpdk options:dpdk-devargs=virtio_user0,path=/dev/vhost-net
ovs-vsctl: Error detected while setting up 'virtiouser0': could not add network device virtiouser0 to ofproto (No such device).  See ovs-vswitchd log for details.
ovs-vsctl: The default log directory is "/var/log/openvswitch".

lsmod |grep vhost
vhost_net              18152  0
vhost                  33338  1 vhost_net
macvtap                22363  1 vhost_net
tun                    27141  6 vhost_net

2017-10-23T19:00:42.743Z|00163|netdev_dpdk|INFO|Device 'virtio_user0,path=/dev/vhost-net' attached to DPDK
2017-10-23T19:00:42.743Z|00164|netdev_dpdk|WARN|Rx checksum offload is not supported on port 2
2017-10-23T19:00:42.743Z|00165|netdev_dpdk|ERR|Interface virtiouser0 MTU (1500) setup error: Invalid argument
2017-10-23T19:00:42.743Z|00166|netdev_dpdk|ERR|Interface virtiouser0(rxq:1 txq:1) configure error: Invalid argument
2017-10-23T19:00:42.743Z|00167|dpif_netdev|ERR|Failed to set interface virtiouser0 new configuration
2017-10-23T19:00:42.743Z|00168|bridge|WARN|could not add network device virtiouser0 to ofproto (No such device)

Which versions (dpdk and ovs) are you using? Thanks

Br,
Wang Zhike

From: Tan, Jianfeng [mailto:jianfeng.tan@intel.com]
Sent: Saturday, October 21, 2017 12:55 AM
To: 王志克; avi.cohen@huawei.com<mailto:avi.cohen@huawei.com>; dpdk-ovs@lists.01.org<mailto:dpdk-ovs@lists.01.org>; users@dpdk.org<mailto:users@dpdk.org>
Subject: Re: VIRTIO for containers


Hi Zhike,

On 10/20/2017 5:24 PM, 王志克 wrote:
I read this thread, and try to do the same way (legacy containers connect to ovs+dpdk). However, I meet following error when creating ovs port.

ovs-vsctl add-port br0 virtiouser0 -- set Interface virtiouser0 type=dpdk options:dpdk-devargs=net_virtio_user0,path=/dev/vhost-net
ovs-vsctl: Error detected while setting up 'virtiouser0': Error attaching device 'net_virtio_user0,path=/dev/vhost-net' to DPDK.  See ovs-vswitchd log for details.
ovs-vsctl: The default log directory is "/var/log/openvswitch".

It should not try to connect this file /dev/vhost-net if this file exists, instead it will use ioctls on it. So please check if you have vhost and vhost-net ko probed into kernel.

Thanks,
Jianfeng



Debug shows that it calls virtio_user_dev_init()->vhost_user_setup(), and failed in connect() with target /dev/vhost-net. The errno is ECONNREFUSED.
Below command indeed shows no one is listening.
lsof | grep vhost-net

In kernel OVS, I guess qemu-kvm would listne to /dev/vhost-net. But for ovs_dpdk and container, what extra work need be done? Appreciate any help.

Br,
Wang Zhike