From: "Zhang, Xiao" <xiao.zhang@intel.com>
To: Mike DeVico <mdevico@xcom-labs.com>,
Thomas Monjalon <thomas@monjalon.net>
Cc: "users@dpdk.org" <users@dpdk.org>,
"Xing, Beilei" <beilei.xing@intel.com>,
"Zhang, Qi Z" <qi.z.zhang@intel.com>,
"Richardson, Bruce" <bruce.richardson@intel.com>,
"Ananyev, Konstantin" <konstantin.ananyev@intel.com>,
"Yigit, Ferruh" <ferruh.yigit@intel.com>,
"Christensen, ChadX M" <chadx.m.christensen@intel.com>,
Tia Cassett <tiac@xcom-labs.com>
Subject: Re: [dpdk-users] [dpdk-dev] Issue with DCB with X710 Quad 10Gb NIC
Date: Wed, 18 Sep 2019 03:32:54 +0000 [thread overview]
Message-ID: <AF0377F445CB2540BB46FF359C1C1BBE011B8960@SHSMSX105.ccr.corp.intel.com> (raw)
In-Reply-To: <E452DF6A-0953-4BDE-BA24-8821F6E19F54@xcom-tech.com>
Hi Mike,
You need add --enable-rss option when start up the process like:
sudo ./vmdq_dcb_app -l 1 -- -p3 --nb-pools 16 --nb-tcs 8 -p 3 --enable-rss
Thanks,
Xiao
> -----Original Message-----
> From: Mike DeVico [mailto:mdevico@xcom-labs.com]
> Sent: Wednesday, September 18, 2019 2:55 AM
> To: Thomas Monjalon <thomas@monjalon.net>
> Cc: users@dpdk.org; Xing, Beilei <beilei.xing@intel.com>; Zhang, Qi Z
> <qi.z.zhang@intel.com>; Richardson, Bruce <bruce.richardson@intel.com>;
> Ananyev, Konstantin <konstantin.ananyev@intel.com>; Yigit, Ferruh
> <ferruh.yigit@intel.com>; Christensen, ChadX M
> <chadx.m.christensen@intel.com>; Tia Cassett <tiac@xcom-labs.com>
> Subject: Re: [dpdk-dev] Issue with DCB with X710 Quad 10Gb NIC
>
> Hello,
>
> So far I haven't heard back from anyone regarding this issue and I would like to
> know what the status is at this point. Also, if you have any recommendations or
> require additional information from me, please let me know.
>
> Thank you in advance,
> --Mike DeVico
>
> On 9/9/19, 1:39 PM, "Thomas Monjalon" <thomas@monjalon.net> wrote:
>
> [EXTERNAL SENDER]
>
> Adding i40e maintainers and few more.
>
> 07/09/2019 01:11, Mike DeVico:
> > Hello,
> >
> > I am having an issue getting the DCB feature to work with an Intel
> > X710 Quad SFP+ NIC.
> >
> > Here’s my setup:
> >
> > 1. DPDK 18.08 built with the following I40E configs:
> >
> > CONFIG_RTE_LIBRTE_I40E_PMD=y
> > CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
> > CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
> > CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
> > CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
> > CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
> > CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
> > CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
> > CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=8
> >
> > 2. /opt/dpdk-18.08/usertools/dpdk-devbind.py --status-dev net
> >
> > Network devices using DPDK-compatible driver
> > ============================================
> > 0000:3b:00.0 'Ethernet Controller X710 for 10GbE SFP+ 1572' drv=igb_uio
> unused=i40e
> > 0000:3b:00.1 'Ethernet Controller X710 for 10GbE SFP+ 1572' drv=igb_uio
> unused=i40e
> > 0000:3b:00.2 'Ethernet Controller X710 for 10GbE SFP+ 1572' drv=igb_uio
> unused=i40e
> > 0000:3b:00.3 'Ethernet Controller X710 for 10GbE SFP+ 1572' drv=igb_uio
> unused=i40e
> >
> > Network devices using kernel driver
> > ===================================
> > 0000:02:00.0 'I350 Gigabit Network Connection 1521' if=enp2s0f0
> drv=igb unused=igb_uio *Active*
> > 0000:02:00.1 'I350 Gigabit Network Connection 1521' if=enp2s0f1
> drv=igb unused=igb_uio *Active*
> >
> > Other Network devices
> > =====================
> > <none>
> >
> > 3. We have a custom FPGA board connected to port 1 of the X710 NIC
> that’s broadcasting
> > a packet tagged with VLAN 1 and PCP 2.
> >
> > 4. I use the vmdq_dcb example app and configure the card with 16
> pools/8 queue each
> > as follows:
> > sudo ./vmdq_dcb_app -l 1 -- -p3 --nb-pools 16 --nb-tcs 8 -p 3
> >
> >
> > The apps starts up fine and successfully probes the card as shown below:
> >
> > sudo ./vmdq_dcb_app -l 1 -- -p3 --nb-pools 16 --nb-tcs 8 -p 3
> > EAL: Detected 80 lcore(s)
> > EAL: Detected 2 NUMA nodes
> > EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> > EAL: Probing VFIO support...
> > EAL: PCI device 0000:02:00.0 on NUMA socket 0
> > EAL: probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:02:00.1 on NUMA socket 0
> > EAL: probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:3b:00.0 on NUMA socket 0
> > EAL: probe driver: 8086:1572 net_i40e
> > EAL: PCI device 0000:3b:00.1 on NUMA socket 0
> > EAL: probe driver: 8086:1572 net_i40e
> > EAL: PCI device 0000:3b:00.2 on NUMA socket 0
> > EAL: probe driver: 8086:1572 net_i40e
> > EAL: PCI device 0000:3b:00.3 on NUMA socket 0
> > EAL: probe driver: 8086:1572 net_i40e
> > vmdq queue base: 64 pool base 1
> > Configured vmdq pool num: 16, each vmdq pool has 8 queues
> > Port 0 MAC: e8 ea 6a 27 b5 4d
> > Port 0 vmdq pool 0 set mac 52:54:00:12:00:00
> > Port 0 vmdq pool 1 set mac 52:54:00:12:00:01
> > Port 0 vmdq pool 2 set mac 52:54:00:12:00:02
> > Port 0 vmdq pool 3 set mac 52:54:00:12:00:03
> > Port 0 vmdq pool 4 set mac 52:54:00:12:00:04
> > Port 0 vmdq pool 5 set mac 52:54:00:12:00:05
> > Port 0 vmdq pool 6 set mac 52:54:00:12:00:06
> > Port 0 vmdq pool 7 set mac 52:54:00:12:00:07
> > Port 0 vmdq pool 8 set mac 52:54:00:12:00:08
> > Port 0 vmdq pool 9 set mac 52:54:00:12:00:09
> > Port 0 vmdq pool 10 set mac 52:54:00:12:00:0a
> > Port 0 vmdq pool 11 set mac 52:54:00:12:00:0b
> > Port 0 vmdq pool 12 set mac 52:54:00:12:00:0c
> > Port 0 vmdq pool 13 set mac 52:54:00:12:00:0d
> > Port 0 vmdq pool 14 set mac 52:54:00:12:00:0e
> > Port 0 vmdq pool 15 set mac 52:54:00:12:00:0f
> > vmdq queue base: 64 pool base 1
> > Configured vmdq pool num: 16, each vmdq pool has 8 queues
> > Port 1 MAC: e8 ea 6a 27 b5 4e
> > Port 1 vmdq pool 0 set mac 52:54:00:12:01:00
> > Port 1 vmdq pool 1 set mac 52:54:00:12:01:01
> > Port 1 vmdq pool 2 set mac 52:54:00:12:01:02
> > Port 1 vmdq pool 3 set mac 52:54:00:12:01:03
> > Port 1 vmdq pool 4 set mac 52:54:00:12:01:04
> > Port 1 vmdq pool 5 set mac 52:54:00:12:01:05
> > Port 1 vmdq pool 6 set mac 52:54:00:12:01:06
> > Port 1 vmdq pool 7 set mac 52:54:00:12:01:07
> > Port 1 vmdq pool 8 set mac 52:54:00:12:01:08
> > Port 1 vmdq pool 9 set mac 52:54:00:12:01:09
> > Port 1 vmdq pool 10 set mac 52:54:00:12:01:0a
> > Port 1 vmdq pool 11 set mac 52:54:00:12:01:0b
> > Port 1 vmdq pool 12 set mac 52:54:00:12:01:0c
> > Port 1 vmdq pool 13 set mac 52:54:00:12:01:0d
> > Port 1 vmdq pool 14 set mac 52:54:00:12:01:0e
> > Port 1 vmdq pool 15 set mac 52:54:00:12:01:0f
> >
> > Skipping disabled port 2
> >
> > Skipping disabled port 3
> > Core 0(lcore 1) reading queues 64-191
> >
> > However, when I issue the SIGHUP I see that the packets
> > are being put into the first queue of Pool 1 as follows:
> >
> > Pool 0: 0 0 0 0 0 0 0 0
> > Pool 1: 10 0 0 0 0 0 0 0
> > Pool 2: 0 0 0 0 0 0 0 0
> > Pool 3: 0 0 0 0 0 0 0 0
> > Pool 4: 0 0 0 0 0 0 0 0
> > Pool 5: 0 0 0 0 0 0 0 0
> > Pool 6: 0 0 0 0 0 0 0 0
> > Pool 7: 0 0 0 0 0 0 0 0
> > Pool 8: 0 0 0 0 0 0 0 0
> > Pool 9: 0 0 0 0 0 0 0 0
> > Pool 10: 0 0 0 0 0 0 0 0
> > Pool 11: 0 0 0 0 0 0 0 0
> > Pool 12: 0 0 0 0 0 0 0 0
> > Pool 13: 0 0 0 0 0 0 0 0
> > Pool 14: 0 0 0 0 0 0 0 0
> > Pool 15: 0 0 0 0 0 0 0 0
> > Finished handling signal 1
> >
> > Since the packets are being tagged with PCP 2 they should be getting
> > mapped to 3rd queue of Pool 1, right?
> >
> > As a sanity check, I tried the same test using an 82599ES 2 port 10GB NIC
> and
> > the packets show up in the expected queue. (Note, to get it to work I had
> > to modify the vmdq_dcb app to set the vmdq pool MACs to all FF’s)
> >
> > Here’s that setup:
> >
> > /opt/dpdk-18.08/usertools/dpdk-devbind.py --status-dev net
> >
> > Network devices using DPDK-compatible driver
> > ============================================
> > 0000:af:00.0 '82599ES 10-Gigabit SFI/SFP+ Network Connection 10fb'
> drv=igb_uio unused=ixgbe
> > 0000:af:00.1 '82599ES 10-Gigabit SFI/SFP+ Network Connection 10fb'
> drv=igb_uio unused=ixgbe
> >
> > Network devices using kernel driver
> > ===================================
> > 0000:02:00.0 'I350 Gigabit Network Connection 1521' if=enp2s0f0 drv=igb
> unused=igb_uio *Active*
> > 0000:02:00.1 'I350 Gigabit Network Connection 1521' if=enp2s0f1 drv=igb
> unused=igb_uio *Active*
> > 0000:3b:00.0 'Ethernet Controller X710 for 10GbE SFP+ 1572' if=enp59s0f0
> drv=i40e unused=igb_uio
> > 0000:3b:00.1 'Ethernet Controller X710 for 10GbE SFP+ 1572' if=enp59s0f1
> drv=i40e unused=igb_uio
> > 0000:3b:00.2 'Ethernet Controller X710 for 10GbE SFP+ 1572' if=enp59s0f2
> drv=i40e unused=igb_uio
> > 0000:3b:00.3 'Ethernet Controller X710 for 10GbE SFP+ 1572' if=enp59s0f3
> drv=i40e unused=igb_uio
> >
> > Other Network devices
> > =====================
> > <none>
> >
> > sudo ./vmdq_dcb_app -l 1 -- -p3 --nb-pools 16 --nb-tcs 8 -p 3
> > EAL: Detected 80 lcore(s)
> > EAL: Detected 2 NUMA nodes
> > EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> > EAL: Probing VFIO support...
> > EAL: PCI device 0000:02:00.0 on NUMA socket 0
> > EAL: probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:02:00.1 on NUMA socket 0
> > EAL: probe driver: 8086:1521 net_e1000_igb
> > EAL: PCI device 0000:3b:00.0 on NUMA socket 0
> > EAL: probe driver: 8086:1572 net_i40e
> > EAL: PCI device 0000:3b:00.1 on NUMA socket 0
> > EAL: probe driver: 8086:1572 net_i40e
> > EAL: PCI device 0000:3b:00.2 on NUMA socket 0
> > EAL: probe driver: 8086:1572 net_i40e
> > EAL: PCI device 0000:3b:00.3 on NUMA socket 0
> > EAL: probe driver: 8086:1572 net_i40e
> > EAL: PCI device 0000:af:00.0 on NUMA socket 1
> > EAL: probe driver: 8086:10fb net_ixgbe
> > EAL: PCI device 0000:af:00.1 on NUMA socket 1
> > EAL: probe driver: 8086:10fb net_ixgbe
> > vmdq queue base: 0 pool base 0
> > Port 0 MAC: 00 1b 21 bf 71 24
> > Port 0 vmdq pool 0 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 1 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 2 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 3 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 4 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 5 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 6 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 7 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 8 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 9 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 10 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 11 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 12 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 13 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 14 set mac ff:ff:ff:ff:ff:ff
> > Port 0 vmdq pool 15 set mac ff:ff:ff:ff:ff:ff
> > vmdq queue base: 0 pool base 0
> > Port 1 MAC: 00 1b 21 bf 71 26
> > Port 1 vmdq pool 0 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 1 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 2 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 3 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 4 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 5 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 6 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 7 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 8 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 9 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 10 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 11 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 12 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 13 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 14 set mac ff:ff:ff:ff:ff:ff
> > Port 1 vmdq pool 15 set mac ff:ff:ff:ff:ff:ff
> >
> > Now when I send the SIGHUP, I see the packets being routed to
> > the expected queue:
> >
> > Pool 0: 0 0 0 0 0 0 0 0
> > Pool 1: 0 0 58 0 0 0 0 0
> > Pool 2: 0 0 0 0 0 0 0 0
> > Pool 3: 0 0 0 0 0 0 0 0
> > Pool 4: 0 0 0 0 0 0 0 0
> > Pool 5: 0 0 0 0 0 0 0 0
> > Pool 6: 0 0 0 0 0 0 0 0
> > Pool 7: 0 0 0 0 0 0 0 0
> > Pool 8: 0 0 0 0 0 0 0 0
> > Pool 9: 0 0 0 0 0 0 0 0
> > Pool 10: 0 0 0 0 0 0 0 0
> > Pool 11: 0 0 0 0 0 0 0 0
> > Pool 12: 0 0 0 0 0 0 0 0
> > Pool 13: 0 0 0 0 0 0 0 0
> > Pool 14: 0 0 0 0 0 0 0 0
> > Pool 15: 0 0 0 0 0 0 0 0
> > Finished handling signal 1
> >
> > What am I missing?
> >
> > Thankyou in advance,
> > --Mike
> >
> >
>
>
>
>
>
>
next prev parent reply other threads:[~2019-09-18 7:05 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <834B2FF6-9FC7-43E4-8CA7-67D861FEE70E@xcom-tech.com>
[not found] ` <2953945.eKoDkclGR7@xps>
2019-09-17 18:54 ` Mike DeVico
2019-09-18 3:32 ` Zhang, Xiao [this message]
2019-09-18 4:20 ` Mike DeVico
2019-09-18 7:02 ` Zhang, Xiao
2019-09-18 7:03 ` Thomas Monjalon
2019-09-18 7:10 ` Zhang, Xiao
2019-09-18 14:17 ` Mike DeVico
2019-09-18 14:53 ` Christensen, ChadX M
2019-09-18 20:22 ` Mike DeVico
2019-09-19 1:23 ` Mike DeVico
2019-09-19 2:52 ` Zhang, Xiao
2019-09-19 13:34 ` Mike DeVico
2019-09-19 14:34 ` Johnson, Brian
[not found] ` <0BD0EAA3-BB16-4B09-BF25-4744C0A879A0@xcom-tech.com>
[not found] ` <b9318aa4f0a943958171cc6fc53a010f@sandvine.com>
[not found] ` <61798E93-724B-4BE6-A03C-63B274E71AD2@xcom-tech.com>
[not found] ` <F35DEAC7BCE34641BA9FAC6BCA4A12E71B4ADE0E@SHSMSX103.ccr.corp.intel.com>
2019-09-26 20:31 ` Mike DeVico
2019-09-30 2:21 ` Zhang, Helin
2019-10-03 23:56 ` Mike DeVico
2019-09-20 21:57 Mike DeVico
2019-10-10 21:23 ` Christensen, ChadX M
2019-10-10 21:25 ` Mike DeVico
2019-10-10 21:12 Mike DeVico
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=AF0377F445CB2540BB46FF359C1C1BBE011B8960@SHSMSX105.ccr.corp.intel.com \
--to=xiao.zhang@intel.com \
--cc=beilei.xing@intel.com \
--cc=bruce.richardson@intel.com \
--cc=chadx.m.christensen@intel.com \
--cc=ferruh.yigit@intel.com \
--cc=konstantin.ananyev@intel.com \
--cc=mdevico@xcom-labs.com \
--cc=qi.z.zhang@intel.com \
--cc=thomas@monjalon.net \
--cc=tiac@xcom-labs.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).