Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support

[Raslan Darawsheh <rasland@mellanox.com>]

Hi,

I believe you are missing the --upstream-libs from OFED installation:

Try it as following:
./mlnxofedinstall --skip-distro-check --dpdk --add-kernel-support --upstream-libs /etc/init.d/openibd restart 

Then rebuild your DPDK.

Kindest regards,
Raslan Darawsheh

-----Original Message-----
From: users [mailto:users-bounces@dpdk.org] On Behalf Of wang.yong19@zte.com.cn
Sent: Thursday, March 1, 2018 3:19 PM
To: george.dit@gmail.com
Cc: Nélio Laranjeiro <nelio.laranjeiro@6wind.com>; users@dpdk.org
Subject: Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support

Hi,
I met the same problem.  My DPDK build environment is "CentOS7.0 + kernel 3.10.0-229.el7.x86_64".
I have download the OFED 4.2 and use the following command to install:
./mlnxofedinstall --skip-distro-check --dpdk --add-kernel-support /etc/init.d/openibd restart However, I still met error while I am compiling DPDK-17.11. The error information is :

In file included from /home/wangyong/dpdk-17.11/drivers/net/mlx4/mlx4.c:71:0:
/home/wangyong/dpdk-17.11/drivers/net/mlx4/mlx4_rxtx.h:44:31: fatal error: infiniband/mlx4dv.h: No such file or directory  #include <infiniband/mlx4dv.h>
                               ^
compilation terminated.
make[6]: *** [mlx4.o] Error 1
make[5]: *** [mlx4] Error 2
make[4]: *** [net] Error 2
make[3]: *** [drivers] Error 2
make[2]: *** [all] Error 2
make[1]: *** [pre_install] Error 2
make: *** [install] Error 2

I checked the "/usr/include/infiniband" directory and I couldn't find the mlx4dv.h file.
Are there any other configurations or steps required? Or the kernel version of linux can't be 3.10 ?



------------------origin------------------
from：george.dit@gmail.com <george.dit@gmail.com>
to：Nelio Laranjeiro <nelio.laranjeiro@6wind.com>
cc：users@dpdk.org <users@dpdk.org>
date：2018年01月05日 16:03
subject：Re: [dpdk-users] Compile DPDK 17.11 with Mellanox NIC support Hi Nelio,

Thanks for the prompt reply and guidance!
My OFED version was 4.1, that's why I was unable to build DPDK 17.11.
With OFED 4.2 everything works on my kernel (v4.4)!

I have one more question: What is the suggested OFED version in order to have a fully featured NIC with all the DPDK classification/offloading capabilities?
My NICs are 100G ConnectX-4 (dual and single port).

Best regards,
Georgios

On Fri, Jan 5, 2018 at 8:46 AM, Nelio Laranjeiro <nelio.laranjeiro@6wind.com
> wrote:

> Hi George
>
> On Fri, Jan 05, 2018 at 08:38:11AM +0100, george.dit@gmail.com wrote:
> > Hi,
> >
> > I noticed that DPDK 17.11 brought some changes regarding the 
> > Mellanox drivers, hence my compilation script does not work for this 
> > version of
> DPDK.
> >
> > Specifically, the release notes of this version state:
> >
> > "Enabled the PMD to run on top of upstream Linux kernel and 
> > rdma-core
> libs,
> > removing the dependency on specific Mellanox OFED libraries."
> >
> > Previously, I was setting CONFIG_RTE_LIBRTE_MLX5_PMD but now, with 
> > this option set I get build errors in drivers/net/mlx5/mlx5.c.
> >
> > Could you please provide some guidance on how DPDK is expected to 
> > work without OFED?
> > Is there any other configuration required?
>
> You should find anything useful in the NIC documentation [1], you have 
> two possibilities, keep using the distribution and install MLNX_OFED 
> 4.2, or update the Linux Kernel and use RDMA-Core, both are explained 
> in he section "21.5.1. Installation".
>
> Regards,
>
> [1] 
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fdpd
> k.org%2Fdoc%2Fguides%2Fnics%2Fmlx5.html&data=02%7C01%7Crasland%40mella
> nox.com%7Cb975ffe6ec1e4dd22b4808d57f76feb3%7Ca652971c7d2e4d9ba6a4d1492
> 56f461b%7C0%7C0%7C636555071431060900&sdata=EOrSSjM9A7MsoWpvQOtW%2FzxnY
> wXaULG53hU%2BQjA4XK8%3D&reserved=0
>
> --
> Nélio Laranjeiro
> 6WIND
>



--
Georgios Katsikas
Industrial Ph.D. Student
Network Intelligence Group
Decision, Networks, and Analytics (DNA) Lab RISE SICS
E-Mail:  georgios.katsikas@ri.se