* [dpdk-users] DPDK 20.08: Not able to program a flow with action RSS in testpmd
@ 2021-02-09 18:36 Joshi, Venkatesh
0 siblings, 0 replies; only message in thread
From: Joshi, Venkatesh @ 2021-02-09 18:36 UTC (permalink / raw)
I'm trying to use testpmd to create a flow with action as RSS as shown below.
The intention is to create an RSS action for eth/ipv4/udp flows so that they get into queues 1, 2 or 3 only.
I give the following command:
testpmd> flow create 0 priority 5 ingress pattern eth / ipv4 / udp / end actions rss queues 1 2 3 end / end
But, this leads to the following error:
port_flow_complain(): Caught PMD error type 16 (specific action): cause: 0x7ffdecfc4ff8, RSS types must be empty while configuring queue region: Operation not supported
The above command is from the testpmd user guide.
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2021-02-09 18:36 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-09 18:36 [dpdk-users] DPDK 20.08: Not able to program a flow with action RSS in testpmd Joshi, Venkatesh
DPDK usage discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://inbox.dpdk.org/users/0 users/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 users users/ https://inbox.dpdk.org/users \
Example config snippet for mirrors.
Newsgroup available over NNTP:
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git