Re: [dpdk-users] OpenSSL Crypto PMD Fails

["Kudupudi, Ugendreshwar" <Ugendreshwar.Kudupudi@cavium.com>]

Yes. I did.

# Compile PMD for Software backed device
CONFIG_RTE_LIBRTE_PMD_OPENSSL=y
CONFIG_RTE_LIBRTE_PMD_OPENSSL_DEBUG=n

-ugen

-----Original Message-----
From: Trahe, Fiona [mailto:fiona.trahe@intel.com] 
Sent: 27 April 2018 15:49
To: Kudupudi, Ugendreshwar <Ugendreshwar.Kudupudi@cavium.com>; users@dpdk.org
Subject: RE: OpenSSL Crypto PMD Fails

It's not enabled by default - have you enabled it in the config file?
sed -i 's,\(CONFIG_RTE_LIBRTE_PMD_OPENSSL\)=n,\1=y,' $RTE_OUTPUT/.config

> -----Original Message-----
> From: users [mailto:users-bounces@dpdk.org] On Behalf Of Kudupudi, 
> Ugendreshwar
> Sent: Wednesday, April 25, 2018 2:24 PM
> To: users@dpdk.org
> Subject: [dpdk-users] OpenSSL Crypto PMD Fails
> 
> Hello Team
> 
> We are looking to execute the sample OpenSSL Crypto PMD and got the below error.
> 
> Environment Details:
> -----------------------------
> 
> OS: Centos 7.3 (3.10.0)
> DPDK: 17.11.2
> OpenSSL Version: 1.0.2k-fips
> Ethernet: Intel X710
> Isolcpu: 0-3
> Link: https://dpdk.org/doc/guides/cryptodevs/openssl.html
> 
> Any help in resolving this issue is deeply appreciated.
> 
> ----------------------------------------- log start 
> ----------------------------------------------------------------------
> ------------ sudo ./examples/l2fwd-crypto/build/l2fwd-crypto -l 0-1 -n 
> 4 --vdev crypto_openssl -- -p 0x3 --chain CIPHER_HASH --cipher_op 
> ENCRYPT --cipher_algo AES_CBC --cipher_key 
> 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:0f --iv 
> 00:01:02:03:04:05:06:07:08:09:0a:0b:0c:0d:0e:ff -- auth_op GENERATE 
> --auth_algo SHA1_HMAC --auth_key
> 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:
> 11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:11:1
> 1:11:11:11:11:11:11:11
> EAL: Detected 28 lcore(s)
> ERROR: failed to parse device "crypto_openssl"
> EAL: Unable to parse device 'crypto_openssl'
> EAL: Error - exiting with code: 1
>   Cause: Invalid EAL arguments
> ----------------------------------------- log end 
> ----------------------------------------------------------------------
> ------------
> 
> 
> 
> We ran the NULL Crypto PMD successfully though.
> 
> 
> 
> ----------------------------------------- log start 
> ----------------------------------------------------------------------
> ------------
> 
> sudo ./examples/l2fwd-crypto/build/l2fwd-crypto -l 1 -n 4 --
> vdev=crypto_null,socket_id=0,max_nb_sessions=128 -- -p 1 --cdev SW 
> --chain CIPHER_ONLY --cipher_algo null
> EAL: Detected 28 lcore(s)
> EAL: Probing VFIO support...
> EAL: VFIO support initialized
> EAL: PCI device 0000:01:00.0 on NUMA socket 0
> EAL:   probe driver: 8086:1521 net_e1000_igb
> EAL: PCI device 0000:01:00.1 on NUMA socket 0
> EAL:   probe driver: 8086:1521 net_e1000_igb
> EAL: PCI device 0000:02:00.0 on NUMA socket 0
> EAL:   probe driver: 8086:1572 net_i40e
> EAL:   using IOMMU type 1 (Type 1)
> PMD: Global register is changed during enable FDIR flexible payload
> PMD: Global register is changed during support QinQ parser
> PMD: Global register is changed during configure hash input set
> PMD: Global register is changed during configure fdir mask
> PMD: Global register is changed during configure hash mask
> PMD: Global register is changed during support QinQ cloud filter
> PMD: Global register is changed during support TPID configuration
> EAL: PCI device 0000:02:00.1 on NUMA socket 0
> EAL:   probe driver: 8086:1572 net_i40e
> CRYPTODEV: [crypto_null] - Creating cryptodev crypto_null
> 
> CRYPTODEV: [crypto_null] - Initialisation parameters - name: 
> crypto_null,socket id: 0, max queue pairs: 8, max sessions: 128 MAC 
> updating enabled Initializing port 0... Port 0, MAC address: 
> 3C:FD:FE:0D:1C:E0
> 
> 
> Checking link 
> status................................................................
> ..........................done
> Port 0 Link Down
> Lcore 1: RX port 0
> Allocated session pool on socket 0
> Lcore 1: cryptodev 0
> L2FWD: entering main loop on lcore 1
> L2FWD:  -- lcoreid=1 portid=0
> L2FWD:  -- lcoreid=1 cryptoid=0
> Options:-
> nportmask: 1
> ports per lcore: 1
> refresh period : 10000
> single lcore mode: disabled
> stats_printing: enabled
> sessionless crypto: disabled
> 
> Crypto chain: Input --> Encrypt --> Output
> 
> ---- Cipher information ---
> Algorithm: null
> Cipher key: at [0x7fedbff38080], len=0
> IV: at [0x7fedbff34640], len=0
> 
> Port statistics ====================================
> Statistics for port 0 ------------------------------
> Packets sent:                                0
> Packets received:                            0
> Packets dropped:                             0
> Crypto statistics ==================================
> Statistics for cryptodev 0 -------------------------
> Packets enqueued:                            0
> Packets dequeued:                            0
> Packets errors:                              0
> Aggregate statistics ===============================
> Total packets received:                      0
> Total packets enqueued:                      0
> Total packets dequeued:                      0
> Total packets sent:                          0
> Total packets dropped:                       0
> Total packets crypto errors:                 0
> ====================================================
> ----------------------------------------- log end 
> ----------------------------------------------------------------------
> ------------
> 
> 
> Regards
> Ugen