From: "Ananyev, Konstantin" <konstantin.ananyev@intel.com>
To: satyavalli rama <satyavalli.rama@gmail.com>,
Anoob Joseph <anoobj@marvell.com>, "dev@dpdk.org" <dev@dpdk.org>,
"dev-request@dpdk.org" <dev-request@dpdk.org>,
"users-request@dpdk.org" <users-request@dpdk.org>,
"users@dpdk.org" <users@dpdk.org>
Subject: Re: [dpdk-users] [dpdk-dev] IPSEC: No IPv6 SP Inbound rule specified
Date: Tue, 22 Sep 2020 10:25:46 +0000 [thread overview]
Message-ID: <BYAPR11MB330176D27C9114EB74713FF19A3B0@BYAPR11MB3301.namprd11.prod.outlook.com> (raw)
In-Reply-To: <CAECt3bNKcvMgp+EsWBJDSQ3s99-skVDuFBtO=vnK0vHr89KDfw@mail.gmail.com>
> Hi Anoob and DPDK Dev Team,
> > ------>While we are running the ipsec-secgw application. We are getting
> > following error:
> >
> > IPSEC: No IPv6 SP Inbound rule specified
> > IPSEC: No IPv6 SP Outbound rule specified
Wonder what makes you think it is an error?
It is just a message saying that you don't have SP rules for IPv6....
If you don't plan to process ipv6 traffic that is probably ok.
> > Creating IPv4 Routing Table (RT) context with 1024 max routes
> > LPM: Adding route 192.168.122.0/24 (1)
> >
> > ------>Below are the steps we've performed..
> >
> > Since we don't have IXGBE driver in the virtual machines. we used SRIOV to
> > import the IXGBE NIC's (Virtual function) from host(Physical function).
> > We refered the below link for SRIOV:
> >
> > https://software.intel.com/content/www/us/en/develop/articles/configure-sr-iov-network-virtual-functions-in-linux-kvm.html
> >
> > This the info after importing IXGBE NIC's into virtual machine:
> > -----------> ip link show
> > 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
> > DEFAULT group default qlen 1000
> > link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
> > 2: ens8: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> > UP mode DEFAULT group default qlen 1000
> > link/ether 52:54:00:bd:f7:ce brd ff:ff:ff:ff:ff:ff
> > 3: ens9: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> > UP mode DEFAULT group default qlen 1000
> > link/ether 52:54:00:e5:35:b5 brd ff:ff:ff:ff:ff:ff
> > 4: ens12: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> > UP mode DEFAULT group default qlen 1000
> > link/ether 52:54:00:14:ce:7c brd ff:ff:ff:ff:ff:ff
> > 5: ens13: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> > UP mode DEFAULT group default qlen 1000
> > link/ether 52:54:00:d0:73:4c brd ff:ff:ff:ff:ff:ff
> >
> > 6: ens3: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
> > mode DEFAULT group default qlen 1000
> > link/ether 96:42:49:cd:9c:61 brd ff:ff:ff:ff:ff:ff
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> > 7: ens11: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN
> > mode DEFAULT group default qlen 1000
> > link/ether 3e:f5:92:ef:9e:16 brd ff:ff:ff:ff:ff:ff
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> >
> >
> > 8: ens10: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> > UP mode DEFAULT group default qlen 1000
> > link/ether 52:54:00:51:ee:74 brd ff:ff:ff:ff:ff:ff
> > 9: ens14: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
> > UP mode DEFAULT group default qlen 1000
> > link/ether 52:54:00:da:08:cb brd ff:ff:ff:ff:ff:ff
> > 10: ens15: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast
> > state UP mode DEFAULT group default qlen 1000
> > link/ether 52:54:00:31:7c:6f brd ff:ff:ff:ff:ff:ff
> >
> > ------>While we are running the ipsec-secgw application. We are getting
> > following error:
> >
> > IPSEC: No IPv6 SP Inbound rule specified
> > IPSEC: No IPv6 SP Outbound rule specified
> > Creating IPv4 Routing Table (RT) context with 1024 max routes
> > LPM: Adding route 192.168.122.0/24 (1)
> >
> > Checking link
> >
> > status..........................................................................................done
> > Port 0 Link Down
> >
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> > Port 1 Link Down
> >
> > <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
> > IPSEC: entering main loop on lcore 0
> > IPSEC: -- lcoreid=0 portid=0 rxqueueid=0
> > IPSEC: -- lcoreid=0 portid=1 rxqueueid=0
> >
> > Please find the attachment which contain console logs.
> >
> > Thanks and Regards
> >
next prev parent reply other threads:[~2020-09-22 10:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <d61d4da786594548953efcc0503c6647@tcs.com>
[not found] ` <2a9c8f5b288d4917806cba6ecefb6ee7@tcs.com>
[not found] ` <459eaf8c52084858b4bc16145336255c@tcs.com>
2020-09-21 7:54 ` [dpdk-users] (no subject) satyavalli rama
2020-09-22 10:06 ` [dpdk-users] IPSEC: No IPv6 SP Inbound rule specified satyavalli rama
2020-09-22 10:25 ` Ananyev, Konstantin [this message]
2020-09-22 10:31 ` [dpdk-users] Port 0 Link Down eerror satyavalli rama
2020-09-26 8:55 ` [dpdk-users] Port Link Down Error while ruining Dpdk ipsec-secgw application satyavalli rama
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=BYAPR11MB330176D27C9114EB74713FF19A3B0@BYAPR11MB3301.namprd11.prod.outlook.com \
--to=konstantin.ananyev@intel.com \
--cc=anoobj@marvell.com \
--cc=dev-request@dpdk.org \
--cc=dev@dpdk.org \
--cc=satyavalli.rama@gmail.com \
--cc=users-request@dpdk.org \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).