Re: [dpdk-users] flow_filtering failed on mlx5

[Cliff Burdick <shaklee3@gmail.com>]

Thanks Ori! I'll test out the patch today. Just to make sure, by removing
the vlan item, does that not allow vlan tags anymore, or is it just
ignoring one if present?

On Mon, Nov 5, 2018, 05:18 Ori Kam <orika@mellanox.com wrote:

> Hi Cliff,
>
> There was an issue I solved it, and submitted relevant patches.
> You can look at them:
>
> http://patches.dpdk.org/patch/47806/
> http://patches.dpdk.org/patch/47807/
>
> Best,
> Ori
>
> > -----Original Message-----
> > From: Shahaf Shuler
> > Sent: Monday, November 5, 2018 9:10 AM
> > To: Cliff Burdick <shaklee3@gmail.com>; users <users@dpdk.org>; Ori Kam
> > <orika@mellanox.com>
> > Subject: RE: [dpdk-users] flow_filtering failed on mlx5
> >
> > +Ori the maintainer of the example code.
> >
> > Saturday, November 3, 2018 5:31 AM, Cliff Burdick:
> > > Subject: [dpdk-users] flow_filtering failed on mlx5
> > >
> > > Hi I'm trying to run the flow_filtering example on a connectx-5, and
> it seems
> > > to fail with dpdk 18.08:
> > >
> > > $ sudo ./build/flow -l 1 -n 1
> > > EAL: Detected 48 lcore(s)
> > > EAL: Detected 2 NUMA nodes
> > > EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
> > > EAL: Probing VFIO support...
> > > EAL: PCI device 0000:01:00.0 on NUMA socket 0
> > > EAL:   probe driver: 15b3:1013 net_mlx5
> > > EAL: PCI device 0000:01:00.1 on NUMA socket 0
> > > EAL:   probe driver: 15b3:1013 net_mlx5
> > > EAL: PCI device 0000:81:00.0 on NUMA socket 1
> > > EAL:   probe driver: 8086:1528 net_ixgbe
> > > EAL: PCI device 0000:81:00.1 on NUMA socket 1
> > > EAL:   probe driver: 8086:1528 net_ixgbe
> > > EAL: PCI device 0000:82:00.0 on NUMA socket 1
> > > EAL:   probe driver: 15b3:1013 net_mlx5
> > > EAL: PCI device 0000:82:00.1 on NUMA socket 1
> > > EAL:   probe driver: 15b3:1013 net_mlx5
> > > :: warn: 5 ports detected, but we use only one: port 0
> > > :: initializing port: 0
> > > Ethdev port_id=0 requested Tx offloads 0x3f doesn't match Tx offloads
> > > capabilities 0xc86af in rte_eth_dev_configure()
> > > EAL: Error - exiting with code: 1
> > >   Cause: :: cannot configure device: err=-22, port=0
> > >
> > >
> > > Has anyone got this to work?
>