Hi Stephen/Long, I did some more code instrumentation and I observed that when a hotplug add event is received, the conf is applied back to VF and offloads work as expected. I also observe that when VF is removed, the offloads still continue to work as expected. Is this because the offloads are not unset when VF is removed ? Regards, Nandini On Thu, Oct 24, 2024 at 9:33 AM Stephen Hemminger < stephen@networkplumber.org> wrote: > On Wed, 23 Oct 2024 13:34:53 -0700 > Nandini Rangaswamy wrote: > > > Hi Stephen, > > The code looking at checksum flags in each packet would not give us > desired > > performance. Instead, should the dpdk app register callbacks for hotplug > > add and re-configure the checksum offloads when VF is added again? > > Regards, > > Nandini > > The code in hn_vf_add which is where netvsc PMD handles hot add of VF > should be feeding the current offload settings to the VF. > > Maybe the rte_eth_conf being passed to VF is incorrect, or > the configuration step there is failing. Probably need more instrumentation > and logs to tell. > -- This electronic communication and the information and any files transmitted with it, or attached to it, are confidential and are intended solely for the use of the individual or entity to whom it is addressed and may contain information that is confidential, legally privileged, protected by privacy laws, or otherwise restricted from disclosure to anyone else. If you are not the intended recipient or the person responsible for delivering the e-mail to the intended recipient, you are hereby notified that any use, copying, distributing, dissemination, forwarding, printing, or copying of this e-mail is strictly prohibited. If you received this e-mail in error, please return the e-mail to the sender, delete it from your computer, and destroy any printed copy of it.