Re: [dpdk-users] Pktgen Cannot configure device panic

[Philip Lee <plee2@andrew.cmu.edu>]

Oops. Sent the last email from my personal one by accident.

Hi Keith,

Here's a copy for the mailing list.

Also, how do I get a list of devices that DPDK detects to find the
ports to blacklist?

I tried blacklisting just the other virtual functions of the Netronome
NIC, but the results are the same. I also tried unbinding the igb_uio
drivers from all but the virtual function I'm using. If I use the
whitelist (-w), does it force it to look at that pci device only? I
tried that and it provided the same results as well.


Also, running pktgen on the working node gives this output with
max_rx_queues and max_tx_queues having values of 1, so it seems like
its a problem with the system setup on this broken node.

** Default Info (5:8.0, if_index:0) **
   max_vfs        :   0, min_rx_bufsize    :  68, max_rx_pktlen :  9216
   max_rx_queues  :   1, max_tx_queues     :   1



Thanks,

Phlip Lee

On Mon, Mar 6, 2017 at 11:17 AM, Philip Lee <phillee4473@gmail.com> wrote:
> Hi Keith,
>
> Also, how do I get a list of devices that DPDK detects to find the ports to
> blacklist?
>
> I tried blacklisting just the other virtual functions of the Netronome NIC,
> but the results are the same. I also tried unbinding the igb_uio drivers
> from all but the virtual function I'm using. If I use the whitelist (-w),
> does it force it to look at that pci device only? I tried that and it
> provided the same results as well.
>
>
> Also, running pktgen on the working node gives this output with
> max_rx_queues and max_tx_queues having values of 1, so it seems like its a
> problem with the system setup on this broken node.
>
> ** Default Info (5:8.0, if_index:0) **
>    max_vfs        :   0, min_rx_bufsize    :  68, max_rx_pktlen :  9216
>    max_rx_queues  :   1, max_tx_queues     :   1
>
>
>
> Thanks,
>
> Phlip Lee
>
>
> On Mon, Mar 6, 2017 at 10:14 AM, Wiles, Keith <keith.wiles@intel.com> wrote:
>>
>>
>> > On Mar 5, 2017, at 8:03 PM, Philip Lee <plee2@andrew.cmu.edu> wrote:
>> >
>> > Hello all,
>> >
>> > I had a "working" install of pktgen that would transfer data but not
>> > provide statistics. The setup are two Netronome NICs connected
>> > together. It was suggested there was a problem with the Netronome PMD,
>> > so I reinstalled both the Netronome BSP and DPDK. Now I'm getting the
>> > following error with trying to start up pktgen with: ./pktgen -c 0x1f
>> > -n 1 -- -m [1:2].0
>> >
>> >>>> Packet Burst 32, RX Desc 512, TX Desc 1024, mbufs/port 8192, mbuf
>> >>>> cache 1024
>> > === port to lcore mapping table (# lcores 5) ===
>> >   lcore:     0     1     2     3     4
>> > port   0:  D: T  1: 0  0: 1  0: 0  0: 0 =  1: 1
>> > Total   :  0: 0  1: 0  0: 1  0: 0  0: 0
>> >    Display and Timer on lcore 0, rx:tx counts per port/lcore
>> >
>> > Configuring 4 ports, MBUF Size 1920, MBUF Cache Size 1024
>> > Lcore:
>> >    1, RX-Only
>> >                RX( 1): ( 0: 0)
>> >    2, TX-Only
>> >                TX( 1): ( 0: 0)
>> > Port :
>> >    0, nb_lcores  2, private 0x8cca90, lcores:  1  2
>> >
>> > ** Default Info (5:8.0, if_index:0) **
>> >   max_vfs        :   0, min_rx_bufsize    :  68, max_rx_pktlen :     0
>> >   max_rx_queues  :   0, max_tx_queues     :   0
>> >   max_mac_addrs  :   1, max_hash_mac_addrs:   0, max_vmdq_pools:     0
>> >   rx_offload_capa:   0, tx_offload_capa   :   0, reta_size     :
>> > 128, flow_type_rss_offloads:0000000000000000
>> >   vmdq_queue_base:   0, vmdq_queue_num    :   0, vmdq_pool_base:     0
>> > ** RX Conf **
>> >   pthresh        :   8, hthresh          :   8, wthresh        :     0
>> >   Free Thresh    :  32, Drop Enable      :   0, Deferred Start :     0
>> > ** TX Conf **
>> >   pthresh        :  32, hthresh          :   0, wthresh        :     0
>> >   Free Thresh    :  32, RS Thresh        :  32, Deferred Start :
>> > 0, TXQ Flags:00000f01
>> >
>> > !PANIC!: Cannot configure device: port=0, Num queues 1,1 (2)Invalid
>> > argument
>> > PANIC in pktgen_config_ports():
>> > Cannot configure device: port=0, Num queues 1,1 (2)Invalid argument6:
>> > [./pktgen() [0x43394e]]
>> > 5: [/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5)
>> > [0x7f89dd0f7f45]]
>> > 4: [./pktgen(main+0x4d4) [0x432f54]]
>> > 3: [./pktgen(pktgen_config_ports+0x3108) [0x45f418]]
>> > 2: [./pktgen(__rte_panic+0xbe) [0x42f288]]
>> > 1: [./pktgen(rte_dump_stack+0x1a) [0x49af3a]]
>> > Aborted
>> >
>> >
>> > ------------------------------------------------------------------------------------------------------------------------
>> >
>> > I tried unbinding the nics and rebinding. I read in an older mailling
>> > post that setup.sh needs to be run every reboot. I executed it, and it
>> > looks like a list of things to install pktgen that I had done manually
>> > again after the most recent reboot. The output of the status check
>> > script is below:
>> > ./dpdk-devbind.py --status
>> >
>> > Network devices using DPDK-compatible driver
>> > ============================================
>> > 0000:05:08.0 'Device 6003' drv=igb_uio unused=
>> > 0000:05:08.1 'Device 6003' drv=igb_uio unused=
>> > 0000:05:08.2 'Device 6003' drv=igb_uio unused=
>> > 0000:05:08.3 'Device 6003' drv=igb_uio unused=
>> >
>> > Network devices using kernel driver
>> > ===================================
>> > 0000:01:00.0 'NetXtreme BCM5720 Gigabit Ethernet PCIe' if=eth0 drv=tg3
>> > unused=igb_uio *Active*
>> > 0000:01:00.1 'NetXtreme BCM5720 Gigabit Ethernet PCIe' if=eth1 drv=tg3
>> > unused=igb_uio
>> > 0000:02:00.0 'NetXtreme BCM5720 Gigabit Ethernet PCIe' if=eth2 drv=tg3
>> > unused=igb_uio
>> > 0000:02:00.1 'NetXtreme BCM5720 Gigabit Ethernet PCIe' if=eth3 drv=tg3
>> > unused=igb_uio
>> > 0000:05:00.0 'Device 4000' if= drv=nfp unused=igb_uio
>> > 0000:43:00.0 'Ethernet Controller 10-Gigabit X540-AT2' if=eth4
>> > drv=ixgbe unused=igb_uio
>> > 0000:43:00.1 'Ethernet Controller 10-Gigabit X540-AT2' if=eth7
>> > drv=ixgbe unused=igb_uio
>> > 0000:44:00.0 'MT27500 Family [ConnectX-3]' if=eth5,eth6 drv=mlx4_core
>> > unused=igb_uio
>> >
>> > Does anyone have any suggestions?
>>
>> Try blacklisting (-b 0000:01:00.1 -b ...) all of the ports you are not
>> using. The number of ports being setup is taken from the number of devices
>> DPDK detects.
>>
>> The only on thing I am worried about is the ' max_rx_queues  :   0,
>> max_tx_queues     :   0’ is reporting zero queues. It maybe other example
>> code does not test the return code from the rte_eth_dev_configure() call. I
>> think the max_rx_queues and max_tx_queues should be at least 1.
>>
>> >
>> > Thanks,
>> >
>> > Philip Lee
>>
>> Regards,
>> Keith
>>
>