* [dpdk-users] Capture in dpdk-pktgen
@ 2017-06-14 13:59 Nishant Verma
2017-06-14 15:14 ` Wiles, Keith
0 siblings, 1 reply; 3+ messages in thread
From: Nishant Verma @ 2017-06-14 13:59 UTC (permalink / raw)
To: users; +Cc: keith.wiles
Hi All,
Is there any change in capture feature supported by dpdk-pktgen.
I was on old version. Now i moved to new one
*Pktgen Ver: 3.3.0 (DPDK 17.05.0) Powered by Intel® DPDK*
In this version i am able to enable capture support on pktgen by
enable 0 capture.
But after that i am not able to find the command to capture the RX stream
on pktgen.
In earlier versions capture <portlist> on/off command was their?
How can i capture packet in new version.
--
Nishant
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-users] Capture in dpdk-pktgen
2017-06-14 13:59 [dpdk-users] Capture in dpdk-pktgen Nishant Verma
@ 2017-06-14 15:14 ` Wiles, Keith
2017-06-14 15:21 ` Nishant Verma
0 siblings, 1 reply; 3+ messages in thread
From: Wiles, Keith @ 2017-06-14 15:14 UTC (permalink / raw)
To: Nishant Verma; +Cc: users
> On Jun 14, 2017, at 8:59 AM, Nishant Verma <vnish11@gmail.com> wrote:
>
> Hi All,
>
> Is there any change in capture feature supported by dpdk-pktgen.
> I was on old version. Now i moved to new one Pktgen Ver: 3.3.0 (DPDK 17.05.0) Powered by Intel® DPDK
>
> In this version i am able to enable capture support on pktgen by
> enable 0 capture.
>
> But after that i am not able to find the command to capture the RX stream on pktgen.
> In earlier versions capture <portlist> on/off command was their?
The new commands are
enable <portlist> capture
disable <portlist> capture
When you disable the capture for a port the captured information should be saved to the current directory.
Did you do the ‘disable <portlist> capture’ command?
>
> How can i capture packet in new version.
>
> --
>
> Nishant
>
>
>
Regards,
Keith
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-users] Capture in dpdk-pktgen
2017-06-14 15:14 ` Wiles, Keith
@ 2017-06-14 15:21 ` Nishant Verma
0 siblings, 0 replies; 3+ messages in thread
From: Nishant Verma @ 2017-06-14 15:21 UTC (permalink / raw)
To: Wiles, Keith; +Cc: users
Thanks a lot, it works.
I was expecting some other commands as in previous version.
...Nishant
On Wed, Jun 14, 2017 at 11:14 AM, Wiles, Keith <keith.wiles@intel.com>
wrote:
>
> > On Jun 14, 2017, at 8:59 AM, Nishant Verma <vnish11@gmail.com> wrote:
> >
> > Hi All,
> >
> > Is there any change in capture feature supported by dpdk-pktgen.
> > I was on old version. Now i moved to new one Pktgen Ver: 3.3.0 (DPDK
> 17.05.0) Powered by Intel® DPDK
> >
> > In this version i am able to enable capture support on pktgen by
> > enable 0 capture.
> >
> > But after that i am not able to find the command to capture the RX
> stream on pktgen.
> > In earlier versions capture <portlist> on/off command was their?
>
> The new commands are
>
> enable <portlist> capture
> disable <portlist> capture
>
> When you disable the capture for a port the captured information should be
> saved to the current directory.
>
> Did you do the ‘disable <portlist> capture’ command?
>
> >
> > How can i capture packet in new version.
> >
> > --
> >
> > Nishant
> >
> >
> >
>
> Regards,
> Keith
>
>
--
Rgds,
Nishant
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2017-06-14 15:21 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-06-14 13:59 [dpdk-users] Capture in dpdk-pktgen Nishant Verma
2017-06-14 15:14 ` Wiles, Keith
2017-06-14 15:21 ` Nishant Verma
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).