Re: [dpdk-users] Why is udp packet, sent by dpdk, received with zero'd payload?

[David Aldrich <david.aldrich.ntml@gmail.com>]

Hi Matt
Thanks very much for your help. I was about to write out in more detail
what our code does but I've just noticed that it uses a zero-copy method to
attach a data buffer to the mbuf using a call to:

rte_pktmbuf_attach()

The docs says for this function: "Right now, not supported:"

So maybe it doesn't work. Anyway, I need to revisit this code and take the
simpler approach of just copying the payload into the mbuf. Maybe I can get
the zero copy method working later. I'll see how this goes and come back if
I need more help.

David

On Wed, Jul 1, 2020 at 4:56 PM Matt Laswell <laswell@infinite.io> wrote:

> OK, this makes sense.  Understand that the mbuf data structure in DPDK
> contains an offset that tells other consumers of the mbuf where to find
> content.  When you call rte_pktmbuf_prepend(), you're adjusting this
> offset, in this case moving it forward by 42 bytes.
>
> Based on what I've seen you say here and on Stack Overflow, I think
> perhaps your code is doing roughly this:
> 1. You have an MBuf that contains your payload
> 2. You create a second MBuf that contains your headers, and link it to the
> payload mbuf via the ->next pointer and nb_segs
> 3. But you then call rte_pktmbuf_prepend() on the payload MBuf, making
> space in the payload MBuf for headers.
> 4. You send the header payload, implicitly also sending the payload one
> (since they're linked)
>
> If that's an accurate description of what you're doing, step 3 is the
> problem.  You're telling the transmitting NIC to start pulling 15 bytes of
> payload from a spot that's 42 bytes ahead of where the payload actually
> lives.  Hence, you get whatever happens to be in the buffer at that point.
> In this case, it's zeroes.  It could be whatever garbage was lying around
> from the last user of the MBuf.
>
> Let me know if that's an accurate description of what your application is
> doing, or if I've misunderstood.
>
> On Wed, Jul 1, 2020 at 10:07 AM David Aldrich <
> david.aldrich.ntml@gmail.com> wrote:
>
>> >If you look at the code for  rte_pktmbuf_prepend  it appears to be just
>> >incrementing data_len and pkt_len by the same amount.
>>
>> I'm sorry, but I don't understand. My calls to rte_pktmbuf_prepend are:
>>
>>
>> p_udp_hdr = (struct udp_hdr*)rte_pktmbuf_prepend(ptMbuf,
>> (uint16_t)sizeof(struct udp_hdr));
>> p_ip_hdr  = (struct ipv4_hdr*)rte_pktmbuf_prepend(ptMbuf,
>> (uint16_t)sizeof(struct ipv4_hdr));
>>
>> are you saying that those calls are wrong?  When you say 'if you look
>> at the code' are you referring to this code?
>>
>> (I thought it best that I should ask for clarification rather than guess).
>>
>> Thanks
>>
>>
>> On Wed, Jul 1, 2020 at 3:59 PM Cliff Burdick <shaklee3@gmail.com> wrote:
>>
>> > If you look at the code for  rte_pktmbuf_prepend  it appears to be just
>> > incrementing data_len and pkt_len by the same amount. My guess is that
>> > those fields were not set to the correct values before you called
>> > rte_pktmbuf_prepend().
>> >
>> > On Wed, Jul 1, 2020 at 6:41 AM David Aldrich <
>> david.aldrich.ntml@gmail.com>
>> > wrote:
>> >
>> >> I think this is where my lack of understanding is my problem.  Looking
>> at
>> >> the mbuf dump:
>> >>
>> >> dump mbuf at 0x53e4e92c0, iova=73e4e9340, buf_len=2176
>> >>   pkt_len=57, ol_flags=c0000000000000, nb_segs=2, in_port=65535
>> >>   segment at 0x53e4e92c0, data=0x53e4e9396, data_len=42
>> >>   Dump data at [0x53e4e9396], len=42
>> >> 00000000: 94 40 C9 1F C4 DB 94 40 C9 1E 13 7D 08 00 45 B8 |
>> .@.....@...}..E.
>> >> 00000010: 00 2B 00 00 00 00 40 11 F5 E8 C0 A8 01 69 C0 A8 |
>> .+....@......i..
>> >> 00000020: 01 68 0B B9 0B B8 00 17 64 2D |  |  |  |  |  |  | .h......d-
>> >>   segment at 0x53e146e40, data=0x53e4fbbc0, data_len=15
>> >>   Dump data at [0x53e4fbbc0], len=15
>> >> 00000000: 48 65 6C 6C 6F 20 66 72 6F 6D 20 64 70 64 6B |  | Hello from
>> dpdk
>> >>
>> >> It consists of two parts (segments?), of lengths 42 and 15. This makes
>> sense to me as I first
>> >> put the payload in the mbuf (15 bytes) and then added the Ethernet and
>> L3 headers (42 bytes) by calling rte_pktmbuf_prepend().
>> >>
>> >> I guess only the first segment is getting transmitted?
>> >>
>> >>
>> >> On Wed, Jul 1, 2020 at 1:57 PM Cliff Burdick <shaklee3@gmail.com>
>> wrote:
>> >>
>> >>> Are you setting data_len and packet_len in the mbuf before sending?
>> >>>
>> >>>
>> >>> On Wed, Jul 1, 2020, 03:23 David Aldrich <
>> david.aldrich.ntml@gmail.com>
>> >>> wrote:
>> >>>
>> >>>>  Hi,
>> >>>>
>> >>>> I have a problem transmitting udp packets with dpdk-stable-18.11.8. I
>> >>>> have
>> >>>> posted a question about it on stackoverflow:
>> >>>>
>> >>>>
>> >>>>
>> https://stackoverflow.com/questions/62674596/why-is-udp-packet-sent-by-dpdk-received-with-zerod-payload
>> >>>>
>> >>>> I would be grateful for any comments either there or in this group
>> >>>> please.
>> >>>>
>> >>>> Best regards
>> >>>>
>> >>>> David
>> >>>>
>> >>>
>>
>