* [dpdk-users] Issue with Ping and Range
@ 2017-05-03 6:06 Dheeraj Dang
2017-05-03 19:41 ` Wiles, Keith
0 siblings, 1 reply; 5+ messages in thread
From: Dheeraj Dang @ 2017-05-03 6:06 UTC (permalink / raw)
To: users
Hi,
I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs that
are on same
network. I am using range to send udp packets and ping4 to send icmp
packets. Receiver
gets all the packets when one type of packet is sent. Means, when I sent
only udp packets,
receiver gets all udp packets and similar thing is observed for icmp
packets as well. But
when I sent both udp and icmp packets, only udp packets are received. No
icmp packets are
observed on receiver side.
Is it possible to send ICMP (ping) packets simultaneously along with UDP
packets (from
range buffer)? If so, how?
Regards,
Dheeraj Dang
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Issue with Ping and Range
2017-05-03 6:06 [dpdk-users] Issue with Ping and Range Dheeraj Dang
@ 2017-05-03 19:41 ` Wiles, Keith
2017-05-04 3:09 ` Dheeraj Dang
0 siblings, 1 reply; 5+ messages in thread
From: Wiles, Keith @ 2017-05-03 19:41 UTC (permalink / raw)
To: Dheeraj Dang; +Cc: users
Sent from my iPhone
> On May 3, 2017, at 2:07 AM, Dheeraj Dang <dheerajdang138@gmail.com> wrote:
>
> Hi,
>
> I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs that
> are on same
> network. I am using range to send udp packets and ping4 to send icmp
> packets. Receiver
> gets all the packets when one type of packet is sent. Means, when I sent
> only udp packets,
> receiver gets all udp packets and similar thing is observed for icmp
> packets as well. But
> when I sent both udp and icmp packets, only udp packets are received. No
> icmp packets are
> observed on receiver side.
>
>
> Is it possible to send ICMP (ping) packets simultaneously along with UDP
> packets (from
> range buffer)? If so, how?
Currently pktgen only send a icmp echo with ping4. In range mode you should be able to send udp and icmp frame types not a echo frame.
>
>
> Regards,
> Dheeraj Dang
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Issue with Ping and Range
2017-05-03 19:41 ` Wiles, Keith
@ 2017-05-04 3:09 ` Dheeraj Dang
2017-05-04 16:41 ` Wiles, Keith
0 siblings, 1 reply; 5+ messages in thread
From: Dheeraj Dang @ 2017-05-04 3:09 UTC (permalink / raw)
To: Wiles, Keith; +Cc: users
I want to send ICMP echo request using main buffer and UDP packets using
range buffer.
Is it possible to do it simultaneously ?
Regards
Dheeraj Dang
On Thu, May 4, 2017 at 1:11 AM, Wiles, Keith <keith.wiles@intel.com> wrote:
>
>
> Sent from my iPhone
>
> > On May 3, 2017, at 2:07 AM, Dheeraj Dang <dheerajdang138@gmail.com>
> wrote:
> >
> > Hi,
> >
> > I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs that
> > are on same
> > network. I am using range to send udp packets and ping4 to send icmp
> > packets. Receiver
> > gets all the packets when one type of packet is sent. Means, when I sent
> > only udp packets,
> > receiver gets all udp packets and similar thing is observed for icmp
> > packets as well. But
> > when I sent both udp and icmp packets, only udp packets are received. No
> > icmp packets are
> > observed on receiver side.
> >
> >
> > Is it possible to send ICMP (ping) packets simultaneously along with UDP
> > packets (from
> > range buffer)? If so, how?
>
> Currently pktgen only send a icmp echo with ping4. In range mode you
> should be able to send udp and icmp frame types not a echo frame.
>
> >
> >
> > Regards,
> > Dheeraj Dang
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Issue with Ping and Range
2017-05-04 3:09 ` Dheeraj Dang
@ 2017-05-04 16:41 ` Wiles, Keith
2017-05-05 6:08 ` Dheeraj Dang
0 siblings, 1 reply; 5+ messages in thread
From: Wiles, Keith @ 2017-05-04 16:41 UTC (permalink / raw)
To: Dheeraj Dang; +Cc: users
> On May 3, 2017, at 10:09 PM, Dheeraj Dang <dheerajdang138@gmail.com> wrote:
>
> I want to send ICMP echo request using main buffer and UDP packets using range buffer.
>
> Is it possible to do it simultaneously ?
Unless you use two ports and a switch to the same destination port. One port sending UDP via range and a Lua script sending ping4 commands via the other port.
Sorry, that is the best I can do.
>
> Regards
> Dheeraj Dang
>
> On Thu, May 4, 2017 at 1:11 AM, Wiles, Keith <keith.wiles@intel.com> wrote:
>
>
> Sent from my iPhone
>
> > On May 3, 2017, at 2:07 AM, Dheeraj Dang <dheerajdang138@gmail.com> wrote:
> >
> > Hi,
> >
> > I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs that
> > are on same
> > network. I am using range to send udp packets and ping4 to send icmp
> > packets. Receiver
> > gets all the packets when one type of packet is sent. Means, when I sent
> > only udp packets,
> > receiver gets all udp packets and similar thing is observed for icmp
> > packets as well. But
> > when I sent both udp and icmp packets, only udp packets are received. No
> > icmp packets are
> > observed on receiver side.
> >
> >
> > Is it possible to send ICMP (ping) packets simultaneously along with UDP
> > packets (from
> > range buffer)? If so, how?
>
> Currently pktgen only send a icmp echo with ping4. In range mode you should be able to send udp and icmp frame types not a echo frame.
>
> >
> >
> > Regards,
> > Dheeraj Dang
>
Regards,
Keith
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Issue with Ping and Range
2017-05-04 16:41 ` Wiles, Keith
@ 2017-05-05 6:08 ` Dheeraj Dang
0 siblings, 0 replies; 5+ messages in thread
From: Dheeraj Dang @ 2017-05-05 6:08 UTC (permalink / raw)
To: Wiles, Keith; +Cc: users
Thanks for your help.
Regards
Dheeraj Dang
On Thu, May 4, 2017 at 10:11 PM, Wiles, Keith <keith.wiles@intel.com> wrote:
>
> > On May 3, 2017, at 10:09 PM, Dheeraj Dang <dheerajdang138@gmail.com>
> wrote:
> >
> > I want to send ICMP echo request using main buffer and UDP packets using
> range buffer.
> >
> > Is it possible to do it simultaneously ?
>
> Unless you use two ports and a switch to the same destination port. One
> port sending UDP via range and a Lua script sending ping4 commands via the
> other port.
>
> Sorry, that is the best I can do.
> >
> > Regards
> > Dheeraj Dang
> >
> > On Thu, May 4, 2017 at 1:11 AM, Wiles, Keith <keith.wiles@intel.com>
> wrote:
> >
> >
> > Sent from my iPhone
> >
> > > On May 3, 2017, at 2:07 AM, Dheeraj Dang <dheerajdang138@gmail.com>
> wrote:
> > >
> > > Hi,
> > >
> > > I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs
> that
> > > are on same
> > > network. I am using range to send udp packets and ping4 to send icmp
> > > packets. Receiver
> > > gets all the packets when one type of packet is sent. Means, when I
> sent
> > > only udp packets,
> > > receiver gets all udp packets and similar thing is observed for icmp
> > > packets as well. But
> > > when I sent both udp and icmp packets, only udp packets are received.
> No
> > > icmp packets are
> > > observed on receiver side.
> > >
> > >
> > > Is it possible to send ICMP (ping) packets simultaneously along with
> UDP
> > > packets (from
> > > range buffer)? If so, how?
> >
> > Currently pktgen only send a icmp echo with ping4. In range mode you
> should be able to send udp and icmp frame types not a echo frame.
> >
> > >
> > >
> > > Regards,
> > > Dheeraj Dang
> >
>
> Regards,
> Keith
>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-05-05 6:08 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-05-03 6:06 [dpdk-users] Issue with Ping and Range Dheeraj Dang
2017-05-03 19:41 ` Wiles, Keith
2017-05-04 3:09 ` Dheeraj Dang
2017-05-04 16:41 ` Wiles, Keith
2017-05-05 6:08 ` Dheeraj Dang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).