* [dpdk-users] Issue with Ping and Range @ 2017-05-03 6:06 Dheeraj Dang 2017-05-03 19:41 ` Wiles, Keith 0 siblings, 1 reply; 5+ messages in thread From: Dheeraj Dang @ 2017-05-03 6:06 UTC (permalink / raw) To: users Hi, I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs that are on same network. I am using range to send udp packets and ping4 to send icmp packets. Receiver gets all the packets when one type of packet is sent. Means, when I sent only udp packets, receiver gets all udp packets and similar thing is observed for icmp packets as well. But when I sent both udp and icmp packets, only udp packets are received. No icmp packets are observed on receiver side. Is it possible to send ICMP (ping) packets simultaneously along with UDP packets (from range buffer)? If so, how? Regards, Dheeraj Dang ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Issue with Ping and Range 2017-05-03 6:06 [dpdk-users] Issue with Ping and Range Dheeraj Dang @ 2017-05-03 19:41 ` Wiles, Keith 2017-05-04 3:09 ` Dheeraj Dang 0 siblings, 1 reply; 5+ messages in thread From: Wiles, Keith @ 2017-05-03 19:41 UTC (permalink / raw) To: Dheeraj Dang; +Cc: users Sent from my iPhone > On May 3, 2017, at 2:07 AM, Dheeraj Dang <dheerajdang138@gmail.com> wrote: > > Hi, > > I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs that > are on same > network. I am using range to send udp packets and ping4 to send icmp > packets. Receiver > gets all the packets when one type of packet is sent. Means, when I sent > only udp packets, > receiver gets all udp packets and similar thing is observed for icmp > packets as well. But > when I sent both udp and icmp packets, only udp packets are received. No > icmp packets are > observed on receiver side. > > > Is it possible to send ICMP (ping) packets simultaneously along with UDP > packets (from > range buffer)? If so, how? Currently pktgen only send a icmp echo with ping4. In range mode you should be able to send udp and icmp frame types not a echo frame. > > > Regards, > Dheeraj Dang ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Issue with Ping and Range 2017-05-03 19:41 ` Wiles, Keith @ 2017-05-04 3:09 ` Dheeraj Dang 2017-05-04 16:41 ` Wiles, Keith 0 siblings, 1 reply; 5+ messages in thread From: Dheeraj Dang @ 2017-05-04 3:09 UTC (permalink / raw) To: Wiles, Keith; +Cc: users I want to send ICMP echo request using main buffer and UDP packets using range buffer. Is it possible to do it simultaneously ? Regards Dheeraj Dang On Thu, May 4, 2017 at 1:11 AM, Wiles, Keith <keith.wiles@intel.com> wrote: > > > Sent from my iPhone > > > On May 3, 2017, at 2:07 AM, Dheeraj Dang <dheerajdang138@gmail.com> > wrote: > > > > Hi, > > > > I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs that > > are on same > > network. I am using range to send udp packets and ping4 to send icmp > > packets. Receiver > > gets all the packets when one type of packet is sent. Means, when I sent > > only udp packets, > > receiver gets all udp packets and similar thing is observed for icmp > > packets as well. But > > when I sent both udp and icmp packets, only udp packets are received. No > > icmp packets are > > observed on receiver side. > > > > > > Is it possible to send ICMP (ping) packets simultaneously along with UDP > > packets (from > > range buffer)? If so, how? > > Currently pktgen only send a icmp echo with ping4. In range mode you > should be able to send udp and icmp frame types not a echo frame. > > > > > > > Regards, > > Dheeraj Dang > ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Issue with Ping and Range 2017-05-04 3:09 ` Dheeraj Dang @ 2017-05-04 16:41 ` Wiles, Keith 2017-05-05 6:08 ` Dheeraj Dang 0 siblings, 1 reply; 5+ messages in thread From: Wiles, Keith @ 2017-05-04 16:41 UTC (permalink / raw) To: Dheeraj Dang; +Cc: users > On May 3, 2017, at 10:09 PM, Dheeraj Dang <dheerajdang138@gmail.com> wrote: > > I want to send ICMP echo request using main buffer and UDP packets using range buffer. > > Is it possible to do it simultaneously ? Unless you use two ports and a switch to the same destination port. One port sending UDP via range and a Lua script sending ping4 commands via the other port. Sorry, that is the best I can do. > > Regards > Dheeraj Dang > > On Thu, May 4, 2017 at 1:11 AM, Wiles, Keith <keith.wiles@intel.com> wrote: > > > Sent from my iPhone > > > On May 3, 2017, at 2:07 AM, Dheeraj Dang <dheerajdang138@gmail.com> wrote: > > > > Hi, > > > > I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs that > > are on same > > network. I am using range to send udp packets and ping4 to send icmp > > packets. Receiver > > gets all the packets when one type of packet is sent. Means, when I sent > > only udp packets, > > receiver gets all udp packets and similar thing is observed for icmp > > packets as well. But > > when I sent both udp and icmp packets, only udp packets are received. No > > icmp packets are > > observed on receiver side. > > > > > > Is it possible to send ICMP (ping) packets simultaneously along with UDP > > packets (from > > range buffer)? If so, how? > > Currently pktgen only send a icmp echo with ping4. In range mode you should be able to send udp and icmp frame types not a echo frame. > > > > > > > Regards, > > Dheeraj Dang > Regards, Keith ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-users] Issue with Ping and Range 2017-05-04 16:41 ` Wiles, Keith @ 2017-05-05 6:08 ` Dheeraj Dang 0 siblings, 0 replies; 5+ messages in thread From: Dheeraj Dang @ 2017-05-05 6:08 UTC (permalink / raw) To: Wiles, Keith; +Cc: users Thanks for your help. Regards Dheeraj Dang On Thu, May 4, 2017 at 10:11 PM, Wiles, Keith <keith.wiles@intel.com> wrote: > > > On May 3, 2017, at 10:09 PM, Dheeraj Dang <dheerajdang138@gmail.com> > wrote: > > > > I want to send ICMP echo request using main buffer and UDP packets using > range buffer. > > > > Is it possible to do it simultaneously ? > > Unless you use two ports and a switch to the same destination port. One > port sending UDP via range and a Lua script sending ping4 commands via the > other port. > > Sorry, that is the best I can do. > > > > Regards > > Dheeraj Dang > > > > On Thu, May 4, 2017 at 1:11 AM, Wiles, Keith <keith.wiles@intel.com> > wrote: > > > > > > Sent from my iPhone > > > > > On May 3, 2017, at 2:07 AM, Dheeraj Dang <dheerajdang138@gmail.com> > wrote: > > > > > > Hi, > > > > > > I am running pktgen-dpdk and sending udp/icmp packets between 2 VMs > that > > > are on same > > > network. I am using range to send udp packets and ping4 to send icmp > > > packets. Receiver > > > gets all the packets when one type of packet is sent. Means, when I > sent > > > only udp packets, > > > receiver gets all udp packets and similar thing is observed for icmp > > > packets as well. But > > > when I sent both udp and icmp packets, only udp packets are received. > No > > > icmp packets are > > > observed on receiver side. > > > > > > > > > Is it possible to send ICMP (ping) packets simultaneously along with > UDP > > > packets (from > > > range buffer)? If so, how? > > > > Currently pktgen only send a icmp echo with ping4. In range mode you > should be able to send udp and icmp frame types not a echo frame. > > > > > > > > > > > Regards, > > > Dheeraj Dang > > > > Regards, > Keith > > ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2017-05-05 6:08 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2017-05-03 6:06 [dpdk-users] Issue with Ping and Range Dheeraj Dang 2017-05-03 19:41 ` Wiles, Keith 2017-05-04 3:09 ` Dheeraj Dang 2017-05-04 16:41 ` Wiles, Keith 2017-05-05 6:08 ` Dheeraj Dang
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).