* [dpdk-users] pktgen:I nvalid link properties for slave 0 in bonding mode 4
@ 2019-05-31 20:54 Vincent Li
2019-06-03 13:56 ` Wiles, Keith
0 siblings, 1 reply; 6+ messages in thread
From: Vincent Li @ 2019-05-31 20:54 UTC (permalink / raw)
To: users
Hi,
I am running Pktgen 3.6.6 + DPDK 18.11.1. when I ran Pktgen with
bonding as ( Pktgen runs fine without bonding and pass packet ok):
root@compute1:/home/dpdk/pktgen-3.6.6#
./app/x86_64-native-linuxapp-gcc/pktgen -c ff
--vdev='net_bonding0,mode=4,xmit_policy=l34,slave=0000:01:00.0,slave=0000:01:00.1'
-- -P -m [1:2-7].2
I got:
bond_ethdev_lsc_event_callback(2705) - Invalid link properties for
slave 0 in bonding mode 4
bond_ethdev_lsc_event_callback(2705) - Invalid link properties for
slave 1 in bonding mode 4
the full screen text as below:
root@compute1:/home/dpdk/pktgen-3.6.6#
./app/x86_64-native-linuxapp-gcc/pktgen -c ff
--vdev='net_bonding0,mode=4,xmit_policy=l34,slave=0000:01:00.0,slave=0000:01:00.1'
-- -P -m [1:2-7].2
Copyright (c) <2010-2019>, Intel Corporation. All rights reserved.
Powered by DPDK
EAL: Detected 8 lcore(s)
EAL: Detected 1 NUMA nodes
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Probing VFIO support...
EAL: PCI device 0000:01:00.0 on NUMA socket -1
EAL: Invalid NUMA socket, default to 0
EAL: probe driver: 8086:10fb net_ixgbe
EAL: PCI device 0000:01:00.1 on NUMA socket -1
EAL: Invalid NUMA socket, default to 0
EAL: probe driver: 8086:10fb net_ixgbe
bond_ethdev_mode_set(1684) - Using mode 4, it is necessary to do TX
burst and RX burst at least every 100ms.
Lua 5.3.1 Copyright (C) 1994-2015 Lua.org, PUC-Rio
*** Copyright (c) <2010-2019>, Intel Corporation. All rights reserved.
*** Pktgen created by: Keith Wiles -- >>> Powered by DPDK <<<
Initialize Port 2 -- TxQ 6, RxQ 1, Src MAC 90:e2:ba:93:26:0c
Device with port_id=0 already stopped
Device with port_id=1 already stopped
Port 2: Link Down <Enable promiscuous mode>
RX processing lcore: 1 rx: 1 tx: 0
TX processing lcore: 2 rx: 0 tx: 1
TX processing lcore: 3 rx: 0 tx: 1
TX processing lcore: 4 rx: 0 tx: 1
TX processing lcore: 5 rx: 0 tx: 1
TX processing lcore: 6 rx: 0 tx: 1
TX processing lcore: 7 rx: 0 tx: 1
| Ports 0-2 of 3 <Main Page> Copyright (c) <2010-2019>, Intel Corporation
Flags:Port :
P--------------:2
Link State : ----TotalRate--
<UP-20000-HD>
Pkts/s Max/Rx : 3/0
Max/Tx : 0/0
MBits/s Rx/Tx : 0/0
Broadcast :
0
Multicast :
0
Sizes 64 :
0
65-127 :
0
128-255 :
0
256-511 :
0
512-1023 :
0
1024-1518 :
0
Runts/Jumbos :
0/0
ARP/ICMP Pkts :
0/0
Errors Rx/Tx :
0/0
Total Rx Pkts :
8
Tx Pkts :
0
Rx MBs :
0
Tx MBs :
0
:
Pattern Type :
abcd...
Tx Count/% Rate :
Forever /100%
Pkt Size/Tx Burst :
64 / 64
Port Src/Dest :
1234 / 5678
Pkt Type:VLAN ID : IPv4
/ TCP:0001
802.1p CoS/DSCP/IPP :
0/ 0/ 0
VxLAN Flg/Grp/vid : 0000/
0/ 0
IP Destination :
192.168.3.1
Source :
192.168.2.1/24
MAC Destination :
00:00:00:00:00:00
Source :
90:e2:ba:93:26:0c
PCI Vendor/Addr :
0000:0000/00:00.0
-- Pktgen Ver: 3.6.6 (DPDK 18.11.1) Powered by DPDK (pid:28799) -------------
** Version: DPDK 18.11.1, Command Line Interface without timers
Pktgen:/> bond_ethdev_lsc_event_callback(2705) - Invalid link
properties for slave 0 in bonding mode 4
bond_ethdev_lsc_event_callback(2705) - Invalid link properties for
slave 1 in bonding mode 4
Pktgen:/>
Pktgen can't transmit packet when I "start 2" after setting the
correct dst ip, dst mac, dport
/ Ports 0-2 of 3 <Main Page> Copyright (c) <2010-2019>, Intel Corporation
Flags:Port :
P--------------:2
Link State : ----TotalRate--
<UP-20000-HD> <---------
Pkts/s Max/Rx : 3/0
Max/Tx : 0/0
MBits/s Rx/Tx : 0/0
Broadcast :
0
Multicast :
0
Sizes 64 :
0
65-127 :
0
128-255 :
0
256-511 :
0
512-1023 :
0
1024-1518 :
0
Runts/Jumbos :
0/0
ARP/ICMP Pkts :
0/0
Errors Rx/Tx :
0/0
Total Rx Pkts :
15
Tx Pkts :
0
Rx MBs :
0
Tx MBs :
0
:
Pattern Type :
abcd...
Tx Count/% Rate :
Forever /100%
Pkt Size/Tx Burst :
64 / 64
Port Src/Dest :
1234 / 80
Pkt Type:VLAN ID : IPv4
/ TCP:0001
802.1p CoS/DSCP/IPP :
0/ 0/ 0
VxLAN Flg/Grp/vid : 0000/
0/ 0
IP Destination :
10.8.8.1
Source :
192.168.2.1/24
MAC Destination :
52:54:00:3f:b9:c2
Source :
90:e2:ba:93:26:0c
PCI Vendor/Addr :
0000:0000/00:00.0
-- Pktgen Ver: 3.6.6 (DPDK 18.11.1) Powered by DPDK (pid:28825) -------------
Pktgen:/> set 2 dport 80
Pktgen:/> set 2 dst ip 10.8.8.1
Pktgen:/> set 2 dst mac 52:54:00:3f:b9:c2
Pktgen:/> start 2
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-users] pktgen:I nvalid link properties for slave 0 in bonding mode 4
2019-05-31 20:54 [dpdk-users] pktgen:I nvalid link properties for slave 0 in bonding mode 4 Vincent Li
@ 2019-06-03 13:56 ` Wiles, Keith
2019-06-04 15:06 ` Vincent Li
0 siblings, 1 reply; 6+ messages in thread
From: Wiles, Keith @ 2019-06-03 13:56 UTC (permalink / raw)
To: Vincent Li; +Cc: users
> On May 31, 2019, at 3:54 PM, Vincent Li <vincent.mc.li@gmail.com> wrote:
>
> Hi,
>
> I am running Pktgen 3.6.6 + DPDK 18.11.1. when I ran Pktgen with
> bonding as ( Pktgen runs fine without bonding and pass packet ok):
>
> root@compute1:/home/dpdk/pktgen-3.6.6#
> ./app/x86_64-native-linuxapp-gcc/pktgen -c ff
> --vdev='net_bonding0,mode=4,xmit_policy=l34,slave=0000:01:00.0,slave=0000:01:00.1'
> -- -P -m [1:2-7].2
I am looking at the problem, it does appear something change.
Regards,
Keith
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-users] pktgen:I nvalid link properties for slave 0 in bonding mode 4
2019-06-03 13:56 ` Wiles, Keith
@ 2019-06-04 15:06 ` Vincent Li
2019-06-04 15:51 ` Wiles, Keith
0 siblings, 1 reply; 6+ messages in thread
From: Vincent Li @ 2019-06-04 15:06 UTC (permalink / raw)
To: Wiles, Keith; +Cc: users
> I am looking at the problem, it does appear something change.
>
thanks Keith for looking into it, I guess I can try some older version
of DPDK and pktgen, what version that might be?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-users] pktgen:I nvalid link properties for slave 0 in bonding mode 4
2019-06-04 15:06 ` Vincent Li
@ 2019-06-04 15:51 ` Wiles, Keith
2019-06-11 16:06 ` Vincent Li
0 siblings, 1 reply; 6+ messages in thread
From: Wiles, Keith @ 2019-06-04 15:51 UTC (permalink / raw)
To: Vincent Li; +Cc: users
> On Jun 4, 2019, at 10:06 AM, Vincent Li <vincent.mc.li@gmail.com> wrote:
>
>> I am looking at the problem, it does appear something change.
>>
>
> thanks Keith for looking into it, I guess I can try some older version
> of DPDK and pktgen, what version that might be?
It would be pretty old and I have no idea which version would work :-(
Regards,
Keith
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-users] pktgen:I nvalid link properties for slave 0 in bonding mode 4
2019-06-04 15:51 ` Wiles, Keith
@ 2019-06-11 16:06 ` Vincent Li
2019-06-11 16:27 ` Wiles, Keith
0 siblings, 1 reply; 6+ messages in thread
From: Vincent Li @ 2019-06-11 16:06 UTC (permalink / raw)
To: Wiles, Keith; +Cc: users
> > thanks Keith for looking into it, I guess I can try some older version
> > of DPDK and pktgen, what version that might be?
> It would be pretty old and I have no idea which version would work :-(
FYI, I tested DPDK 18.11.1 testpmd txonly mode with bonding, it
appears working ok, I guess the the problem is in pktgen, not in DPDK
then, correct?
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [dpdk-users] pktgen:I nvalid link properties for slave 0 in bonding mode 4
2019-06-11 16:06 ` Vincent Li
@ 2019-06-11 16:27 ` Wiles, Keith
0 siblings, 0 replies; 6+ messages in thread
From: Wiles, Keith @ 2019-06-11 16:27 UTC (permalink / raw)
To: Vincent Li; +Cc: users
> On Jun 11, 2019, at 11:06 AM, Vincent Li <vincent.mc.li@gmail.com> wrote:
>
>>> thanks Keith for looking into it, I guess I can try some older version
>>> of DPDK and pktgen, what version that might be?
>> It would be pretty old and I have no idea which version would work :-(
>
> FYI, I tested DPDK 18.11.1 testpmd txonly mode with bonding, it
> appears working ok, I guess the the problem is in pktgen, not in DPDK
> then, correct?
Yes, I had assumed it was in Pktgen. I am working on get some help from the bonding PMD folk to see what the problem is with the configuration in Pktgen.
Regards,
Keith
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-06-11 16:27 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-05-31 20:54 [dpdk-users] pktgen:I nvalid link properties for slave 0 in bonding mode 4 Vincent Li
2019-06-03 13:56 ` Wiles, Keith
2019-06-04 15:06 ` Vincent Li
2019-06-04 15:51 ` Wiles, Keith
2019-06-11 16:06 ` Vincent Li
2019-06-11 16:27 ` Wiles, Keith
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).