* [dpdk-users] pktgen-dpdk: Anomalous behaviour running dpdk applications
@ 2020-06-22 19:24 Mishal Shah
0 siblings, 0 replies; only message in thread
From: Mishal Shah @ 2020-06-22 19:24 UTC (permalink / raw)
To: users; +Cc: Mehnaz Yunus, Pavan Vachhani
We're trying to run l2fwd, l3fwd, l3fwd-power dpdk application using
pktgen-dpdk as the generator. The SUT & the generator are connected using 4
The pktgen-dpdk is configured using Lua script to send 64B packets at 100%
line rate on the ports 0 & 2, and ports 1 & 3 are receiving for 2 mins.
We're observing a strange behavior that the sending rate stays around 4
Mpps on average (expected is around 14 Mpps). The rate sometimes starts at
14 Mpps around but falls in after a certain period of time. The behavior is
expected only for 64B, 100% rate, rest all cases (different packet sizes,
rate %) work as expected.
Could anyone guide why this could be happening or if there's any mistake in
the setup which could have been done?
Please do let us know if any other details regarding the setup are required.
Mehnaz, Pavan, Mishal
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2020-06-22 19:25 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-22 19:24 [dpdk-users] pktgen-dpdk: Anomalous behaviour running dpdk applications Mishal Shah
DPDK usage discussions
This inbox may be cloned and mirrored by anyone:
git clone --mirror https://inbox.dpdk.org/users/0 users/git/0.git
# If you have public-inbox 1.1+ installed, you may
# initialize and index your mirror using the following commands:
public-inbox-init -V2 users users/ https://inbox.dpdk.org/users \
Example config snippet for mirrors.
Newsgroup available over NNTP:
AGPL code for this site: git clone https://public-inbox.org/public-inbox.git