DPDK usage discussions
 help / color / mirror / Atom feed
From: Truring Team <truring12@gmail.com>
To: Nishant Verma <vnish11@gmail.com>
Cc: dev@dpdk.org, USERS <users@dpdk.org>
Subject: Re: [dpdk-users] DPDK issue with Marvell NIC QLogic Corp. FastLinQ QL41000
Date: Wed, 26 May 2021 09:50:56 +0530
Message-ID: <CALvshjMQDGFS8sWuHQOJvdd0ppy-+PhkvnzhH_WcyqOQu9BNdA@mail.gmail.com> (raw)
In-Reply-To: <CAHhCjUFD41ACbwZcs94R91c+on9i3VfuXgdPxbvNi+qDWu-oAg@mail.gmail.com>

Hi Nishant,

cat /proc/meminfo
11:59:29.200 §MemTotal:       23101672 kB
11:59:29.200 §MemFree:        15254764 kB
11:59:29.200 §MemAvailable:   19243184 kB
11:59:29.200 §Buffers:            6792 kB
11:59:29.201 §Cached:          4084844 kB
11:59:29.201 §SwapCached:            0 kB
11:59:29.201 §Active:          3609016 kB
11:59:29.201 §Inactive:        1175160 kB
11:59:29.201 §Active(anon):     695644 kB
11:59:29.202 §Inactive(anon):    19716 kB
11:59:29.202 §Active(file):    2913372 kB
11:59:29.202 §Inactive(file):  1155444 kB
11:59:29.202 §Unevictable:           0 kB
11:59:29.202 §Mlocked:               0 kB
11:59:29.203 §SwapTotal:      11665404 kB
11:59:29.204 §SwapFree:       11665404 kB
11:59:29.204 §Dirty:                32 kB
11:59:29.204 §Writeback:             0 kB
11:59:29.204 §AnonPages:        694764 kB
11:59:29.205 §Mapped:           140220 kB
11:59:29.205 §Shmem:             22800 kB
11:59:29.205 §Slab:             445016 kB
11:59:29.205 §SReclaimable:     289968 kB
11:59:29.205 §SUnreclaim:       155048 kB
11:59:29.206 §KernelStack:       16624 kB
11:59:29.206 §PageTables:        35892 kB
11:59:29.206 §NFS_Unstable:          0 kB
11:59:29.206 §Bounce:                0 kB
11:59:29.206 §WritebackTmp:          0 kB
11:59:29.207 §CommitLimit:    22167664 kB
11:59:29.207 §Committed_AS:    4342668 kB
11:59:29.207 §VmallocTotal:   34359738367 kB
11:59:29.207 §VmallocUsed:      463188 kB
11:59:29.207 §VmallocChunk:   34358835196 kB
11:59:29.208 §HardwareCorrupted:     0 kB
11:59:29.208 §AnonHugePages:    329728 kB
11:59:29.208 §CmaTotal:              0 kB
11:59:29.209 §CmaFree:               0 kB
11:59:29.209 §HugePages_Total:    1024
11:59:29.209 §HugePages_Free:     1019
11:59:29.209 §HugePages_Rsvd:        0
11:59:29.209 §HugePages_Surp:        0
11:59:29.209 §Hugepagesize:       2048 kB
11:59:29.209 §DirectMap4k:      381760 kB
11:59:29.209 §DirectMap2M:    13973504 kB
11:59:29.215 §DirectMap1G:    11534336 kB

Regards


On Wed, 26 May 2021 at 09:43, Nishant Verma <vnish11@gmail.com> wrote:

> Can you paste output of /proc/meminfo ?
>
>
>
> Regards,
> NV
>
> On Tue, May 25, 2021 at 9:52 PM Truring Team <truring12@gmail.com> wrote:
>
>> Hi Team,
>>
>> I am trying to run the dpdk test-pmd application (DPDK 20.11 and DPDK
>> 21.05) with NIC QLogic Corp. FastLinQ QL41000 Series 10/25/40/50GbE
>> Controller but facing following issues:
>>
>> If someone can look into the following logs and help me figure out the
>> issue?
>>
>>
>>
>> 1. DPDK 20.11 ( Using 1 GB hugepages)
>>
>>    gdb ./dpdk-testpmd
>>
>> 12:45:59.347 §GNU gdb (GDB) Red Hat Enterprise Linux 7.6.1-114.el7
>>
>> 12:45:59.347 §Copyright (C) 2013 Free Software Foundation, Inc.
>>
>> 12:45:59.348 §License GPLv3+: GNU GPL version 3 or later
>> http://gnu.org/licenses/gpl.html
>>
>> 12:45:59.349 §This is free software: you are free to change and
>> redistribute it.
>>
>> 12:45:59.349 §There is NO WARRANTY, to the extent permitted by law.  Type
>> "show copying"
>>
>> 12:45:59.349 §and "show warranty" for details.
>>
>> 12:45:59.350 §This GDB was configured as "x86_64-redhat-linux-gnu".
>>
>> 12:45:59.351 §For bug reporting instructions, please see:
>>
>> 12:45:59.351 §http://www.gnu.org/software/gdb/bugs/...
>>
>> 12:45:59.415 §Reading symbols from
>> /home/itwsadmin/dpdk-20.11/build/app/dpdk-testpmd...(no debugging symbols
>> found)...done.
>>
>> 12:46:11.492 §(gdb) r -l 0-5 -n4 -- -i
>>
>> 12:46:11.493 §Starting program:
>> /home/itwsadmin/dpdk-20.11/build/app/./dpdk-testpmd -l 0-5 -n4 -- -i
>>
>> 12:46:11.717 §[Thread debugging using libthread_db enabled]
>>
>> 12:46:11.719 §Using host libthread_db library "/lib64/libthread_db.so.1".
>>
>> 12:46:11.768 §EAL: Detected 6 lcore(s)
>>
>> 12:46:11.769 §EAL: Detected 1 NUMA nodes
>>
>> 12:46:11.769 §[New Thread 0x7ffff6a71700 (LWP 23184)]
>>
>> 12:46:11.769 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>
>> 12:46:11.770 §[New Thread 0x7ffff6270700 (LWP 23185)]
>>
>> 12:46:11.792 §EAL: Selected IOVA mode 'PA'
>>
>> 12:46:11.792 §EAL: No free hugepages reported in hugepages-2048kB
>>
>> 12:46:11.792 §EAL: No available hugepages reported in hugepages-2048kB
>>
>> 12:46:11.854 §EAL: Probing VFIO support...
>>
>> 12:46:11.855 §[New Thread 0x7ffff5a6f700 (LWP 23186)]
>>
>> 12:46:11.855 §[New Thread 0x7ffff526e700 (LWP 23187)]
>>
>> 12:46:11.855 §[New Thread 0x7ffff4a6d700 (LWP 23188)]
>>
>> 12:46:11.855 §[New Thread 0x7ffff426c700 (LWP 23189)]
>>
>> 12:46:11.856 §[New Thread 0x7ffff3a6b700 (LWP 23190)]
>>
>> 12:46:11.896 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>> 0000:65:00.0 (socket 0)
>>
>> 12:46:11.915 §
>>
>> 12:46:11.915 §Program received signal SIGSEGV, Segmentation fault.
>>
>> 12:46:11.916 §0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>
>> 12:46:11.916 §Missing separate debuginfos, use: debuginfo-install
>> glibc-2.17-324.el7_9.x86_64 libgcc-4.8.5-44.el7.x86_64
>> libpcap-1.5.3-12.el7.x86_64 numactl-libs-2.0.12-5.el7.x86_64
>> zlib-1.2.7-19.el7_9.x86_64
>>
>> 12:46:14.542 §(gdb) bt
>>
>> 12:46:14.548 §#0  0x0000000000ec5b20 in ecore_fw_overlay_mem_alloc ()
>>
>> 12:46:14.548 §#1  0x0000000000eb811e in ecore_hw_init ()
>>
>> 12:46:14.549 §#2  0x0000000000ef7397 in qed_slowpath_start ()
>>
>> 12:46:14.549 §#3  0x0000000000ef0483 in qede_common_dev_init ()
>>
>> 12:46:14.549 §#4  0x0000000000ef1113 in qede_eth_dev_pci_probe ()
>>
>> 12:46:14.549 §#5  0x0000000000a4450b in pci_probe ()
>>
>> 12:46:14.550 §#6  0x00000000009dbc6c in rte_bus_probe ()
>>
>> 12:46:14.550 §#7  0x00000000009fa91c in rte_eal_init ()
>>
>> 12:46:14.617 §#8  0x0000000000425db1 in main ()
>>
>> 12:46:17.052 §(gdb) quit
>>
>> 12:46:17.056 §A debugging session is active.
>>
>> 12:46:17.056 §
>>
>> 12:46:17.057 §        Inferior 1 [process 23180] will be killed.
>>
>>
>>
>>
>>
>> 2. *DPDK 21.05:*
>>
>>    ./dpdk-testpmd -l 0-5 -n4 -- -i
>>
>> 12:46:46.257 §EAL: Detected 6 lcore(s)
>>
>> 12:46:46.257 §EAL: Detected 1 NUMA nodes
>>
>> 12:46:46.258 §EAL: Detected static linkage of DPDK
>>
>> 12:46:46.260 §EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
>>
>> 12:46:46.285 §EAL: Selected IOVA mode 'PA'
>>
>> 12:46:46.285 §EAL: No free 2048 kB hugepages reported on node 0
>>
>> 12:46:46.288 §EAL: No available 2048 kB hugepages reported
>>
>> 12:46:46.382 §EAL: Probe PCI driver: net_qede (1077:8070) device:
>> 0000:65:00.0 (socket 0)
>>
>> 12:46:46.403 §[QEDE PMD: ()]ecore_load_mcp_offsets:The address of the MCP
>> scratch-pad is not configured
>>
>> 12:46:46.403 §[QEDE PMD: ()]ecore_mcp_cmd_init:MCP is not initialized
>>
>> 12:46:46.404 §[QEDE PMD: ()]ecore_mcp_cmd_and_union:MFW is not
>> initialized!
>>
>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_get_nvm_info:Shared memory not
>> initialized
>>
>> 12:46:46.404 §[QEDE PMD: ()]ecore_hw_prepare_single:Failed to get HW
>> information
>>
>> 12:46:46.404 §[qed_probe:74(65:00.0:dpdk-port-0)]hw prepare failed
>>
>> 12:46:46.404 §[qede_common_dev_init:2566(65:00.0:dpdk-port-0)]qede probe
>> failed rc -3
>>
>> 12:46:46.406 §EAL: Requested device 0000:65:00.0 cannot be used
>>
>> 12:46:46.408 §TELEMETRY: No legacy callbacks, legacy socket not created
>>
>> 12:46:46.423 §testpmd: No probed ethernet devices
>>
>> 12:46:46.461 §Interactive-mode selected
>>
>> 12:46:46.519 §testpmd: create a new mbuf pool <mb_pool_0>: n=187456,
>> size=2176, socket=0
>>
>> 12:46:46.522 §testpmd: preferred mempool ops selected: ring_mp_mc
>>
>> 12:46:46.540 §Done
>>
>>
>>
>>
>>
>> System Information:
>>
>> *ethtool -i p2p1*
>> driver: qede
>> version: 8.33.0.20
>> *firmware-version: mfw 8.24.44.0 storm 8.33.11.0*
>> expansion-rom-version:
>> bus-info: 0000:65:00.0
>> supports-statistics: yes
>> supports-test: yes
>> supports-eeprom-access: no
>> supports-register-dump: yes
>> supports-priv-flags: yes
>>
>>
>>
>> *ethtool -i p2p2 *driver: qede
>> version: 8.33.0.20
>> firmware-version: mfw 8.24.44.0 storm 8.33.11.0
>> expansion-rom-version:
>> bus-info: 0000:65:00.1
>> supports-statistics: yes
>> supports-test: yes
>> supports-eeprom-access: no
>> supports-register-dump: yes
>> supports-priv-flags: yes
>>
>>
>>
>>
>>
>> *lspci -nn | grep Ether*
>>
>> 12:42:50.579 §04:00.0 Ethernet controller [0200]: Broadcom Inc. and
>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>
>> 12:42:50.581 §04:00.1 Ethernet controller [0200]: Broadcom Inc. and
>> subsidiaries NetXtreme BCM5720 Gigabit Ethernet PCIe [14e4:165f]
>>
>> 12:42:50.582 §65:00.0 Ethernet controller [0200]: QLogic Corp. FastLinQ
>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>
>> 12:42:50.583 §65:00.1 Ethernet controller [0200]: QLogic Corp. FastLinQ
>> QL41000 Series 10/25/40/50GbE Controller [1077:8070] (rev 02)
>>
>>
>>
>> cd /lib/firmware/qed/
>>
>> ls
>>
>> 12:48:27.269 §qed_init_values-8.10.9.0.bin
>> qed_init_values-8.30.12.0.bin         qed_init_values_zipped-8.10.5.0.bin
>> qed_init_values_zipped-8.33.11.0.bin  qed_init_values_zipped-8.7.3.0.bin
>>
>> 12:48:27.272 §qed_init_values-8.14.6.0.bin
>> qed_init_values-8.33.12.0.bin         qed_init_values_zipped-8.15.3.0.bin
>> qed_init_values_zipped-8.37.2.0.bin
>>
>> 12:48:27.273 §qed_init_values-8.18.9.0.bin
>> qed_init_values-8.40.33.0.bin         qed_init_values_zipped-8.20.0.0.bin
>> qed_init_values_zipped-8.37.7.0.bin
>>
>> 12:48:27.275 §qed_init_values-8.20.0.0.bin
>> qed_init_values_zipped-8.10.10.0.bin  qed_init_values_zipped-8.33.1.0.bin
>> qed_init_values_zipped-8.4.2.0.bin
>>
>>
>> Best Regards
>>
>> Puneet
>>
>

  reply	other threads:[~2021-05-26  4:21 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-26  1:51 Truring Team
2021-05-26  4:13 ` Nishant Verma
2021-05-26  4:20   ` Truring Team [this message]
2021-05-26  4:35     ` Nishant Verma
2021-05-26  4:41       ` Truring Team
2021-05-26  9:57         ` [dpdk-users] [dpdk-dev] " Varghese, Vipin
2021-06-01 13:00           ` [dpdk-users] [EXT] " Igor Russkikh

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=CALvshjMQDGFS8sWuHQOJvdd0ppy-+PhkvnzhH_WcyqOQu9BNdA@mail.gmail.com \
    --to=truring12@gmail.com \
    --cc=dev@dpdk.org \
    --cc=users@dpdk.org \
    --cc=vnish11@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK usage discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/users/0 users/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 users users/ https://inbox.dpdk.org/users \
		users@dpdk.org
	public-inbox-index users

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.users


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git