From: Chinmaya Dwibedy <ckdwibedy@gmail.com>
To: users@dpdk.org
Subject: [dpdk-users] Probing fails upon trying to bind all QAT VFs to igb_uio kernel driver on VM
Date: Thu, 8 Sep 2016 11:08:26 +0530 [thread overview]
Message-ID: <CAMHS8REfayNnYipwXYx0MtVgZm6W4q_TTJ07KP7=bCG+eAbEkQ@mail.gmail.com> (raw)
Hi,
We have installed openstack-mitaka release on CentO7 system. It has two
Intel QAT devices. There are 32 VF devices available
per QAT Device/DH895xCC device. I have assigned 4 QAT VFs to VM instance
(Wind River Linux).
On VM,
1) The # lspci -vvd: 443 command confirms that, these QAT VFs are not used
by any kernel driver.
2) The #lsmod | grep qa also says that, no QAT driver is loaded.
Did #echo "8086 0443" > /sys/bus/pci/drivers/igb_uio/new_id to bind all the
available 4 VFs to the DPDK UIO driver. Thereafter triggered #lspci -vvd:
443 and found that none of the QAT VFs are bound to igb_uio kernel
driver. The system log (#dmesg) shows that, probe failed for these devices.
Can anyone please suggest what might be the underlying issue and its
solution? Thank you in advance for your support and time.
root@Local:/opt# dmesg -c
[ 1979.178546] igb_uio: probe of 0000:00:06.0 failed with error -2
[ 1979.181698] igb_uio: probe of 0000:00:07.0 failed with error -2
[ 1979.184850] igb_uio: probe of 0000:00:08.0 failed with error -2
[ 1979.187997] igb_uio: probe of 0000:00:09.0 failed with error -2
root@Local:/opt#
root@Local:/opt# lspci -vvd:443
00:06.0 Co-processor: Intel Corporation DH895XCC Series QAT Virtual Function
Subsystem: Intel Corporation Device 0000
Physical Slot: 6
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at febd7000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at febd8000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
00:07.0 Co-processor: Intel Corporation DH895XCC Series QAT Virtual Function
Subsystem: Intel Corporation Device 0000
Physical Slot: 7
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at febd9000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at febda000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
00:08.0 Co-processor: Intel Corporation DH895XCC Series QAT Virtual Function
Subsystem: Intel Corporation Device 0000
Physical Slot: 8
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at febdb000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at febdc000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
00:09.0 Co-processor: Intel Corporation DH895XCC Series QAT Virtual Function
Subsystem: Intel Corporation Device 0000
Physical Slot: 9
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at febdd000 (64-bit, non-prefetchable) [size=4K]
Region 2: Memory at febde000 (64-bit, non-prefetchable) [size=4K]
Capabilities: [90] MSI: Enable- Count=1/1 Maskable+ 64bit+
Address: 0000000000000000 Data: 0000
Masking: 00000000 Pending: 00000000
root@Local:/opt#
Regards,
Chinmaya
reply other threads:[~2016-09-08 5:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='CAMHS8REfayNnYipwXYx0MtVgZm6W4q_TTJ07KP7=bCG+eAbEkQ@mail.gmail.com' \
--to=ckdwibedy@gmail.com \
--cc=users@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).