* [dpdk-users] The link speed changing at SFP
@ 2017-09-06 11:47 ASM
0 siblings, 0 replies; only message in thread
From: ASM @ 2017-09-06 11:47 UTC (permalink / raw)
To: users
Hi folks!
If I use 10Gb copper cards (X520-AT2), I connect cable to 10G switch
and got 10Gb link.
If I remove cable from 10Gb switch and connect it to 1G switch i have
got 1Gb link from
my device.
But for 82599ES 10g SFI/SFP+ (fiber cars) I have problems.
If I connect cable to 10G switch and start DPDK application I have got
10Gb link, but if I
remove cable (without rte_eth_dev_stop), and connect it to 1Gb switch
I have no link.
If I connect cable to 1G switch and start DPDK application I have got
1Gb link, but if I
remove cable (without rte_eth_dev_stop), and coonect it to 10Gb switch
I have no link.
In other words, the connection is not established at a different speed
link without restarting the application.
On the linux(kernel driver) the link speed changes successfully
without any resets and restarts.
Did anyone have a similar problem? Have any ideas what is wrong?
---
Best regards,
Leonid Myravjev
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2017-09-06 11:47 UTC | newest]
Thread overview: (only message) (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-09-06 11:47 [dpdk-users] The link speed changing at SFP ASM
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).